HDCABLING CC
CC Reg : 2008 / 202726 / 23
VAT# 4820251371

Shop 4, Outdoor Corner
Corner of Hendrik Verwoerd Drive and Galway
Hennopspark
Centurion

Tel : 012 653 6829 / 012 653 6234
Tel : 011 476 4991
Mobile : 073 751 3337
Fax : 086 721 5486
HDCabling
All prices and stock are current as of: Friday 24 May, 2013

0.5mm Flex Speaker Wire 24 Gauge - Price per Meter

Speaker cable to connect any type of 4 Ohm or 8 Ohm speaker to digital receivers or amplifiers. Distance to speaker and transmission quality will vary according to estimated lengths per wire gauge as below.

Wire Size

2 ohm load

4 ohm load

6 ohm load

8 ohm load

22 AWG

3 feet max

6 feet max

9 feet max

12 feet max

20 AWG

5 feet max

10 feet max

15 feet max

20 feet max

18 AWG

8 feet max

16 feet max

24 feet max

32 feet max

16 AWG

12 feet max

24 feet max

36 feet max

48 feet max

14 AWG

20 feet max

40 feet max

60 feet**

80 feet**

12 AWG

30 feet max

60 feet**

90 feet**

120  feet**

10 AWG

50 feet max

100 feet**

150 feet**

200 feet**

Price: R1.50 Manufacturer: HDCabling
Model Number: Flex_speaker_cable Added to Inventory on: Tuesday 12 March, 2013

1.0mm Oxygen Free 18 Gauge Speaker Cable - Price per meter
Speaker cable to connect any type of 4 Ohm or 8 Ohm speaker to digital receivers or amplifiers. Distance to speaker and transmission quality will vary according to estimated lengths per wire gauge as below.

Speaker_Cable_Estimated_Lengths_20_10_Gauge

Price: R4.90 Manufacturer: HDCabling
Model Number: 1.0mm_Speaker_Cable Added to Inventory on: Friday 05 August, 2011

1.5 Meter Male 3.5mm Jack to 2 x RCA Male Cable - PC Sound card cable
Convert your PC or notebook stereo speaker port (3.5mm jack) into regular RCA and connect it to your stereo system. Most cellphones and other mobile devices also uses a 3.5mm jack output and can use this cable to connect to RCA audio system.

If having multiple 3.5mm jack outputs on PC sound card use more cables to ensure Front Left/Right, Centre/Subwoofer and Rear Left/Right can be connected to analogue surround sound amplifier or receiver.
Price: R27.00 Manufacturer: HDCabling
Model Number: Cable_3.5mm_to_2xRCA Added to Inventory on: Monday 04 April, 2011

1.5 Meter Male 3.5mm to 3-RCA AV Cable (3.5mm to Composite video / Stereo Audio)
These 3.5mm AV cables are normally used on mobile DVD Players or Video Cameras with analogue 3.5mm output to connect to a display with Composite (Yellow RCA) input for video and stereo audio (Red/White).
Price: R29.00 Manufacturer: HDCabling
Model Number: 3.5mm_to_AV Added to Inventory on: Friday 05 August, 2011

1.5 Meter Male 3.5mm to 3.5mm Male Jack cable
3.5mm connectors are mostly used on stereo audio sources such as HDTV's input, Cellphones, PC Audio cards outputs etc.

Specifications

- Length 1.5 meter
- Colour - White/Green, White / Light Red
Price: R29.00 Manufacturer: HDCabling
Model Number: 3.5mm_to_3.5mm Added to Inventory on: Wednesday 30 March, 2011

1.8 Meter 3-RCA Male to 3-RCA Male (Stereo / Composite Video Connections Patch cord)
These cables are commonly used for connecting traditional Stereo Output + Composite (yellow RCA) Video and audio via RCA. Generic stereo analog interconnects for your audio equipment. These durable, yet economical audio / video interconnects are the perfect solution when you need a simple, low cost solution for connecting stereo audio + composite equipment.

Use a RCA Female to RCA Female Coupler / Socket to extend RCA Cables. Note that maximum transmission distances will be dependant on the signal quality and strength on the source / player.

These cables cannot be used for coaxial digital audio and a list of digital audio cables can be found here

?Connectors: RCA Plug / Male x3 to RCA Plug / Male x3 (Yellow, White, Red)
?Molded connectors feature gold-plated contacts to ensure long-lasting quality
?Ultra-flexible jacket for easy installation Related Keywords : stereo rca cable, extend rca stereo, composite 2 rca cable, long 2 rca cable, composite 2 rca cable, cable for composite, cable for component, 2 rca to 2 rca compsite and stereo, yellow rca long cable, hi-fi cable audio and video, home entertainment cable for audio and video
Price: R28.00 Manufacturer:
Model Number: 1.8m_2_RCA_2_RCA_Stereo Added to Inventory on: Tuesday 03 March, 2009

1.8 Meter Component / YPbPr video Male to Male RCA cable
Please use premium quality cables for > 576p component resolutions such as the Component cable at 1.8 Meter Premium 5-RCA Component Video cable / Digital Audio Coaxial Cable - S/PDIF, Digital Coax, Subwoofer

This Cable is for :

Connecting HDPVR, DVD Players, Blu-ray Players or any other device with component video output (3-RCA's / YPbPr) to a LCD supporting Y,Pb,Pr / Component signal inputs.

Technical info

Component video (Y, Pr, Pb / Y, Cr, Cb) is amongst the best analog methods for transferring crisp, vibrant video from your various sources. It will support high definition up to 1080p and progressive scan signals.

- 3 RCA Video (Y, Pb, Pr) to 3 RCA Video (Y, Pb, Pr)
- Color Coded, Gold Plated, Molded Connectors

Video Cables

- Supports both Y, Pr, Pb and Y, Cr, Cb Color Space Component Signals
- Up to 576p resolution recommended, higher resolution depends on signal quality / strength from source

In a perfect environment where there is no signal interferance issues and all componentry are the same level, component should deliver a comparable signal to HDMI. However, because analog signal like component are suceptible to signal interface, picture quality coloration related to cable quality and degredation due to attenuation over distance, in actual application, the HDMI picture will generally look sharper. Component suffers gradual picture quality degredation as the signal degrades while HDMI remains level and then drops off completely. However, component can be more reliable and resilient over extended lengths. Component is a good back up when HDMI can not be reliably used.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.

Related keywords : 3-rca cable, component video cable, component audio cable, 3-rca cable for video and audio, high quality rca cable, digital coaxial 3-rca cable, YPbPr cables, video cable component, 3 rca cable, 5 rca cable
Price: R39.00 Manufacturer: HDCabling
Model Number: 1.8m_YPbPr_Cable Added to Inventory on: Tuesday 29 March, 2011

1.8 meter Digital RCA Audio Cable 22AWG M/M 75ohm RG59/U - S/PDIF, Digital Coaxial, Subwoofer
This CABLE is for:

HDPVR Digital Coaxial (Dolby Digital 5.1 Audio)
Standard PVR Digital Coaxial (Dolby Digital 5.1 Audio)
DVD Player
DVD Audio Player
SA-CD Player
CD Player
D-VHS Player
Game Console
A/V Receiver
Digital Video Recorder
Satellite Receiver
Digital Cable Box
Computer sound card with digital coaxial audio output
Active Subwoofer
Home Theater Personal Computer (HTPC)

This cable connects dvd players to audio receivers, Sattelite boxes and cable boxes to audio receivers, computer audio equipment, and any other equipment that supports Coax(S/Pdif) interface interconnect. Lastest model DSTV Decoders & DSTV HDPVR also use the Coaxial Optical out to provide true Dolby Surround Sound to a dolby amplifier / receiver.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.

This cable allows jitter-free transfer of digital audio signals. The low-loss cable design includes pure copper center conductor and shielding to preserve signal strength and minimize noise. Gold-plated, RCA connectors and pins to give you solid, corrosion-free contact.

Features:

Connectors :

- Single RCA Plug(male) to single RCA Plug(male).
- 24k Gold Plated connectors ensure long-lasting, corrosion-free connections.
- Fully molded connecters provide excellent strain relief.
- High-quality coax wire with copper braid shield reduces unwanted noise and distortion.
- Easy installation with non-slip rubber grip.
- Improves digital signal delivery as compared to standard RCA type audio cables.
- True digital signal maintained by high materials and connectors 99.999% Pure Copper Non-OFC conductor.
- High-density double shielding for max rejection of EMI and RFI.

What is SPDIF? - S/PDIF (Sony/Philips Digital Interface) is a standard audio transfer file format. It is usually found on digital audio equipment such as a DAT (Digital Audio Tape) machine, PC Sound Cards or audio processing device. It allows the transfer of audio from one file to another without the conversion to and from an analog format, which could degrade the signal quality.

Related Keywords : digital audio cable, digital surround sound cable, premium video cable, digital audio video cable
Price: R39.00 Manufacturer: HDCabling
Model Number: 1.8m_Coaxial_Digital_RCA Added to Inventory on: Monday 26 May, 2008

1.8 Meter Premium 5-RCA Component Video cable / Digital Audio Coaxial Cable - S/PDIF, Digital Coax, Subwoofer
This Cable is for :

Connecting HDPVR, DVD Players, Blu-ray Players or any other device with component video output (3-RCA's / YPbPr) to a LCD supporting Y,Pb,Pr / Component signal inputs. It will also connect the stereo audio part (Red / White) RCA's to the LCD if the LCD supports RCA inputs for audio.

Technical info

Component video (Y, Pr, Pb / Y, Cr, Cb) is amongst the best analog methods for transferring crisp, vibrant video from your various sources. It will support high definition up to 1080p and progressive scan signals.

Our standard cables are made with RG-59/u coax cables. Coaxial cables provide excellent shielding from signal interference. The connectors are molded on with a built-in strain relief neck, gold plated tips and are color coded in bright and easy to identify shades of red, green and blue.

- 3 RCA Video (Y, Pr, Pb) + 2 RCA Audio (Stereo L/R) Connectors
- Color Coded, Gold Plated, Molded Connectors

Video Cables

- Heavy-Duty, Triple Shielded RG-59/u Coax Cable
- Supports both Y, Pr, Pb and Y, Cr, Cb Color Space Component Signals
- Stranded 22AWG (17/0.16) Center Conductor
- Super Shielding Aluminum Foil +96/0.12 Braid Return
- Up to 1080p resolution

Audio Cables

- 28AWG Coaxial Cable

RG stands for Radio Guide. It's a specification for types of Coaxial cables. It defines specs such as gauge and impedance. In this case, RG6 uses a thicker gauge than RG 59 and both are 75ohm.

In a perfect environment where there is no signal interferance issues and all componentry are the same level, component should deliver a comparable signal to HDMI. However, because analog signal like component are suceptible to signal interface, picture quality coloration related to cable quality and degredation due to attenuation over distance, in actual application, the HDMI picture will generally look sharper. Component suffers gradual picture quality degredation as the signal degrades while HDMI remains level and then drops off completely. However, component can be more reliable and resilient over extended lengths. Component is a good back up when HDMI can not be reliably used.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.

Related keywords : 5-rca cable, component video cable, component audio cable, 3-rca cable for video and audio, high quality rca cable, digital coaxial 3-rca cable, YPbPr cables, video cable component, 3 rca cable, 5 rca cable
Price: R99.00 Manufacturer: HDCabling
Model Number: 1.8m_5-RCA_RG69 Added to Inventory on: Monday 20 October, 2008

100 Meter roll standard 4-Core Telephone cable
4-core standard telephone cable used from fax machines, ADSL routers, analogue telephones etc. A RJ11 connector must be crimped onto the ends of each cable as listed at RJ11 Telephone Connector. To securely crimp the connector onto the cable use the crimping tool at RJ45 / RJ11 / RJ12 Crimping Tool.
Price: R170.00 Manufacturer: HDCabling
Model Number: 100m_Telephone_Cable Added to Inventory on: Sunday 05 August, 2012

100m Roll RG6u Coaxial Cable (RF Cable) - 75 Ohm, 64 Braid - White
RG6/U Quad-shield is the minimum requirement under the latest Australian Standard for digital TV antenna cabling and for all TV antennas cabling for apartments / units (MATV). It is also used for the distribution of Cable TV (CATV) and Satellite TV (SATV) in residential or commercial premises. It features a copper-clad-steel inner conductor. Single-shield, dual-shield and tri-shield versions of RG6/U are available but do not provide adequate EMI shielding.

RG6/U type cables have lower attenuation characteristics than RG59 cable and therefore are suitable for transmission applications of about 200 to 300 meter (depending on source signal strength).

Various cable end connector types are used with RG6U cables including F-Type connectors at Male F-Type Connector on both ends of a cable will create a Male to Male cable. If you need to convert these 2 male ends to a RCA Male connector to have a custom made / long distance RCA cable for analog audio or video transmission use the connector at Female F-Type to Male RCA Adaptor on each end of the cable to screw on the Male F-type connectors to have a Male to Male RCA Cable with a 75 Ohm impedance.
Price: R199.00 Manufacturer: HDCabling
Model Number: RG6U_100m_Roll Added to Inventory on: Monday 23 April, 2012

15 meter Digital RCA Audio Cable 22AWG M/M 75ohm RG59/U - S/PDIF, Digital Coaxial, Subwoofer
This CABLE is for:

HDPVR Digital Coaxial (Dolby Digital 5.1 Audio)
Standard PVR Digital Coaxial (Dolby Digital 5.1 Audio)
DVD Player
DVD Audio Player
SA-CD Player
CD Player
D-VHS Player
Game Console
A/V Receiver
Digital Video Recorder
Satellite Receiver
Digital Cable Box
Computer sound card with digital coaxial audio output
Active Subwoofer
Home Theater Personal Computer (HTPC)

This cable connects dvd players to audio receivers, Sattelite boxes and cable boxes to audio receivers, computer audio equipment, and any other equipment that supports Coax(S/Pdif) interface interconnect. Lastest model DSTV Decoders & DSTV HDPVR also use the Coaxial Optical out to provide true Dolby Surround Sound to a dolby amplifier / receiver. By coupling / extending these high quality coaxial cables distances of > 30 meter can be reached for crystal clear dolby digital audio.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.

This cable allows jitter-free transfer of digital audio signals. The low-loss cable design includes pure copper center conductor and shielding to preserve signal strength and minimize noise. Gold-plated, RCA connectors and pins to give you solid, corrosion-free contact.

Features:

Connectors :

- Single RCA Plug(male) to single RCA Plug(male).
- 24k Gold Plated connectors ensure long-lasting, corrosion-free connections.
- Fully molded connecters provide excellent strain relief.
- High-quality coax wire with copper braid shield reduces unwanted noise and distortion.
- Easy installation with non-slip rubber grip.
- Improves digital signal delivery as compared to standard RCA type audio cables.
- True digital signal maintained by high materials and connectors 99.999% Pure Copper Non-OFC conductor.
- High-density double shielding for max rejection of EMI and RFI.

What is SPDIF? - S/PDIF (Sony/Philips Digital Interface) is a standard audio transfer file format. It is usually found on digital audio equipment such as a DAT (Digital Audio Tape) machine, PC Sound Cards or audio processing device. It allows the transfer of audio from one file to another without the conversion to and from an analog format, which could degrade the signal quality.

Related Keywords : digital audio cable, digital surround sound cable, premium video cable, digital audio video cable
Price: R209.00 Manufacturer:
Model Number: 15m_Coaxial_Digital_RCA Added to Inventory on: Thursday 18 June, 2009

1x4 (4-Way) Active / Powered Composite / RCA Splitter
This Composite / RCA signal splitter will split the input signal from a Composite (Yellow RCA) player / source to 4 identical outputs to be connected to 4 x Composite / AV / Yellow RCA displays. The outputs are synchronized. If the source / player has stereo RCA audio out (Red / White) connectors, the audio will also be split to 4 identical outputs to be connected to the display or individual home entertainment systems.

Technical Specifications

● Model VSP4
● Signal :VIDEO (Yellow RCA) AUDIO (Red/White RCA)
● Input port: VIDEO (Yellow RCA) , AUDIO (Red / White RCA)
● Output port : VIDEO (Yellow RCA) , AUDIO (Red / White RCA) x 4
● Video input :1Vp-p
● Video impedance :75Ω
● Video gain : 0db≦DG≦1db
● Audio input :2.2Vp-p/20KΩ
● Audio gain :-3db≦DG≦0db
● AC area:185V-250V 50Hz
● Rated power : 5W
● Operating Environment Temperature : -10℃-40℃
● External Dimensions :167×180×45mm

Warnings :

● To avoid Electrical Shock, do not open the splitter. Refer servicing to qualified personal only.
● Put this device on a place with sufficient ventilation.
● Do not expose the device to high temperatures, high humidity or direct sunlight.
● Before cleaning, power off device. Don’t use chemical wipes.

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Related Keywords : ypbpr splitter, component splitter, 5-rca splitter, 3-rca splitter, composite splitter, rca splitter
Price: R299.00 Manufacturer: HDCabling
Model Number: 1x4_RCA_Composite_Splitter Added to Inventory on: Thursday 29 October, 2009

1x4 (4-Way) Powered Component Splitter (YPbPr Splitter) with Stereo RCA audio splitting - Up to 1080i support
This Component / YPbPr signal splitter will split the input signal from a Component / YPbPr player / source to 4 indentical outputs to be connected to 4 x Component / YPbPr displays. The outputs are syncronized. If the source / player has stereo RCA audio out (Red / White) connectors, the audio will also be split to 4 identical outputs to be connected to the display or individual home entertainment systems.

Technical Specifications

● Model VSP8
● Signal :Y Pb/Cb Pr/Cr / AUDIO(R L)
● Input port: Y Pb/Cb Pr/Cr / AUDIO(R L) 1 Port x RCA
● Output port : Y Pb/Cb Pr/Cr / AUDIO(R L)4 Port x RCA
● Video input :1Vp-p
● Video impedance :75Ω
● Video gain : 0db≦DG≦1db
● Audio input :2.2Vp-p/20KΩ
● Audio gain :-3db≦DG≦0db
● Resolution support up to 1080i
● AC area:185V-250V 50Hz
● Rated power :6W
● Operating Environment Temperature:-10℃-40℃
● External Dimensions :245×180×45mm

Warnings :

● To avoid Electrical Shock, do not open the splitter. Refer servicing to qualified personal only.
● Put this device on a place with sufficient ventilation.
● Do not expose the device to high temperatures, high humidity or direct sunlight.
● Before cleaning, power off device. Don’t use chemical wipes.

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Related Keywords : ypbpr splitter, component splitter, 5-rca splitter, 3-rca splitter, composite splitter, rca splitter
Price: R329.00 Manufacturer: HDCabling
Model Number: 1x4_YPbPr_Component_Splitter Added to Inventory on: Thursday 29 October, 2009

1x5 (5-Way) Active / Powered Svideo Splitter
This Svideo signal splitter will split the input signal from a Svideo player / source to 5 indentical outputs to be connected to 5 x Svideo displays. The outputs are syncronized.

Technical Specifications

● Model SVSP4
● Signal :S-video (4-pin Svideo connector)
● Input port: 1 x S-video (4-pin Svideo connector)<
● Output port : 5 x S-video (4-pin Svideo connector)<
● Video input :1Vp-p
● Video impedance :75Ω
● Video gain : 0db≦DG≦1db
● AC area:185V-250V 50Hz
● Rated power : 5W
● Operating Environment Temperature : -10℃-40℃
● External Dimensions :167×180×45mm

Warnings :

● To avoid Electrical Shock, do not open the splitter. Refer servicing to qualified personal only.
● Put this device on a place with sufficient ventilation.
● Do not expose the device to high temperatures, high humidity or direct sunlight.
● Before cleaning, power off device. Don’t use chemical wipes.

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Related Keywords : ypbpr splitter, component splitter, 5-rca splitter, 3-rca splitter, composite splitter, rca splitter
Price: R299.00 Manufacturer: HDCabling
Model Number: 1x5_Svideo_Splitter Added to Inventory on: Monday 14 June, 2010

1x8 (8-Way) Component Splitter / YPbPr Splitter (Powered from 220v socket) with Stereo RCA audio splitting - Up to 1080p support
This Component / YPbPr signal splitter will split the input signal from a Component / YPbPr player / source to 8 indentical outputs to be connected to 8 x Component / YPbPr displays. The outputs are syncronized. If the source / player has stereo RCA audio out (Red / White) connectors, the audio will also be split to 8 identical outputs to be connected to the display or individual home entertainment systems.

Techincal Specifications

● Model DSP108
● Signal :Y Pb/Cb Pr/Cr / AUDIO(R L)
● Input port: Y Pb/Cb Pr/Cr / AUDIO(R L) 1 Port x RCA
● Output port : Y Pb/Cb Pr/Cr / AUDIO(R L) 8 Port x RCA
● Video input : 1Vp-p
● Video impedance : 75Ω
● Video gain : 0db≦DG≦1db
● Audio input : 2.2Vp-p/20KΩ
● Audio gain : -3db≦DG≦0db
● AC area : 185V-250V 50Hz
● Rated power : 18W
● Operating Environment Temperature : -10℃-40℃
● External Dimensions : 245×180×70mm

Warnings :

● To avoid Electrical Shock, do not open the splitter. Refer servicing to qualified personal only.
● Put this device on a place with sufficient ventilation.
● Do not expose the device to high temperatures, high humidity or direct sunlight.
● Before cleaning, power off device. Don’t use chemical wipes.

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Related Keywords : ypbpr splitter, component splitter, 5-rca splitter, 3-rca splitter, composite splitter, rca splitter
Price: R729.00 Manufacturer: HDCabling
Model Number: 1x8_YPbPr_Component_Splitter Added to Inventory on: Wednesday 23 December, 2009

2 Meter 4-pin S-Video to RCA Cable / AV Cable
If you've got a composite (yellow RCA) signal and only S-Video jacks left on your equipment, or visa versa, this bi-directional S-Video / Composite RCA Video cable will do the trick. Convert from S-Video to Composite RCA Video or Composite to S-Video. High quality, gold plated connectors ensure a secure connection.

This cable has a Male S-Video connector and a male RCA connector. For use with a VCR, DVD, Video Camera and other S-Video devices.

● Allow you to convert S-Video to RCA Male Connector
● High Quality Cable
● 2 meters in Length. To extend use a RCA to RCA Coupler / Socket and any high quality RCA to RCA cable
● Color - Blue
● No decrease (or increase) in video quality.
● No loss in signal - NONE.
Related Keywords : svideo to rca, s-video to rca, rca to s-video, rca to svideo, rca svideo, svideo rca, composite svideo, s-video composite converter, svideo composite adapter, composite to s-video cable, vcr cable, yellow rca to vcr svideo, s-video to yellow rca
Price: R27.00 Manufacturer: HDCabling
Model Number: 2m_RCA_SVideo Added to Inventory on: Tuesday 02 December, 2008

2 Meter Male SCART to SCART male cable - High Quality / Gold Plated
SCART stands for Syndicat francais des Constructeurs d'Appareils Radio et Television, and refers to the industry standard interface for physical and electrical interconnection between two pieces of audio-visual equipment, originated by the French company Peritel.

A SCART connector is used to connect two electronic devices such as a television set and a video cassette recorder (VCR) or DVD player which has SCART Female inputs / outputs. Each device has a female 21-pin connector interface. A cable with a male plug at each end is used to connect the devices. (The 21st pin is actually not a pin but a ground shield contact.)

Stereo audio, composite video, and control signals are provided in both directions. RGB video signals are INPUT only. Most new television sets and VCRs in the European market and other countries that use the PAL video standard come equipped with one or more SCART connectors.

SCART Connector pin layout

SCART Cable Connector Diagram / Pin Layout

Price: R65.00 Manufacturer: HDCabling
Model Number: 2m_SCART_to_SCART Added to Inventory on: Wednesday 13 October, 2010

2 Way TV Aerial RF Splitter - 90 Degree

This can be used to split a normal aerial from 1 to 2 or to attach more than one RF cable into your TV.


Price: R9.00 Manufacturer: HDCabling
Model Number: 2_Way_Aerial_splitter Added to Inventory on: Wednesday 30 January, 2013

2.5mm Oxygen Free 12 Gauge Speaker Cable - Price per meter
Speaker cable to connect any type of 4 Ohm or 8 Ohm speaker to digital receivers or amplifiers. Distance to speaker and transmission quality will vary according to estimated lengths per wire gauge as below.

Speaker_Cable_Estimated_Lengths_20_10_Gauge

Price: R9.90 Manufacturer: HDCabling
Model Number: 2.5mm_Speaker_Cable Added to Inventory on: Friday 05 August, 2011

3 Meter 3-RCA Male to 3-RCA Male (Composite and Stereo Connections)
These cables are commonly used for connecting traditional Composite (Yellow RCA) and Stereo Output audio via RCA. Use a RCA Female to RCA Female Coupler / Socket to extend RCA Cables. Note that maximum transmission distances will be dependant on the signal quality and strength on the source / player.

This cable can be used for component video (3-RCA, Y Pb Pr) connections but for higher resolutions (720p/1080p) premium quality RG59 / 75Ohm cables are recommended such as 5-RCA Component Video/Audio Coaxial Cable (RG-59/U)

These cables cannot be used for coaxial digital audio and a list of digital audio cables can be found here

?Connectors: RCA Plug / Male x3 to RCA Plug / Male x3
?Oxygen-free copper conductors for efficient signal transmission
?Bonded cable construction provides for neat and easy component video connections
?Molded connectors feature gold-plated contacts to ensure long-lasting quality
?Ultra-flexible jacket for easy installation Related Keywords : stereo rca cable, extend rca stereo, composite 3 rca cable, long 3 rca cable, composite 3 rca cable, cable for composite, cable for component, 3 rca to 3 rca compsite and stereo, yellow rca long cable, hi-fi cable audio and video, home entertainment cable for audio and video
Price: R32.00 Manufacturer:
Model Number: 3m_Composite_Stereo_RCA Added to Inventory on: Wednesday 03 December, 2008

3 Meter 4 Pin Mini-DIN S-Video / SVHS Cable with Gold Plated Plugs

The Comprehensive 3 meter S-Video 4-Pin Male to 4-Pin Male Cable is specifically engineered for high-resolution applications. Two individually 100% shielded, high-resolution coax conductors are used to produce the highest quality image reproduction possible. The connectors are premium, home-theater-style molded 24K gold 4-pin connectors, giving you maximum signal transfer and a perfect connection every time.

Cable Type

S-Video

Length

3  meter

Supported Transfer Speed

Not Specified by Manufacturer

Ideal Application

High-Resolution Video Applications

Conductors

2 Individually 100% Shielded Coax Cables

Gauge

30 AWG

Shielding

95% Bare Copper Braid

Dielectric (Insulation)

FPE .059

Jacket

Mist Black PVC

Connector 1

Mini 4-Pin Din Plug, Gold-Plated

Connector 2

Mini 4-Pin Din Plug, Gold-Plated

Contacts

Gold-Plated

Body

PVC, Copper Braid

Price: R29.00 Manufacturer: HDCabling
Model Number: 3_meter_4_pin_s-video_cable Added to Inventory on: Thursday 18 April, 2013

3.5mm Stereo Coupler (Socket-Socket / Female-Female)
Use this connector to convert the 3.5mm male jack plug on a cable (used on most headphones and microphones) to a female 3.5mm port.

Alternatively use the adapter for connecting two cables with 3.5mm male plugs together to create a longer cable.
Price: R19.00 Manufacturer: HDCabling
Model Number: 3.5m_Coupler Added to Inventory on: Friday 12 March, 2010

3.5mm Stereo Headphone Y Splitter Adapter for iPod / CD / MP3 Players / Stereo Source
Sharing you favorite melody with your friends and lover, with this mini splitter adapter, sharing is simple :
Just plug this adapter into your headphone socket and you and a friend can plug in headphones and listen to all those tunes you've got stored on your iPod / CD / MP3 players.

Specifications :

● One 3.5 mm stereo male plug to two 3.5 mm stereo female jack adapter.
● Simple and easy to install.
● Connect 2 headsets or speakers to one jack.
● Ideal for connecting two mini stereo speakers to your iPod/CD/MP3 players.
● Nickel plated contacts resist corrosion and maximize signal integrity.
● Ideal for sound cards or headphones.
● Color: Black finished

These adapters can be cascaded to split 1 input to 3 output by using 2 adapters, 1 input 2 to 4 outputs using 3 adapters etc.

Related Keywords : 3.5mm split, headphone splitter adapter, stereo splitter 3.5mm, split ipod sound output 3.5mm, 3.5mm y splitter, microphone splitter adapter, headphone stereo split
Price: R14.00 Manufacturer: HDCabling
Model Number: 3.5mm_Y_Splitter Added to Inventory on: Monday 15 September, 2008

3.5mm Stereo Jack Plug to 2 x RCA Female Adapter - Gold Plated
RCA Audio Splitter Adapter split 3.5mm Male to 2 RCA Female (Stereo).

This adapter is commonly used to convert the 3.5mm stereo audio from a PC sound card to 2 x RCA female connectors to connect to an amplifier with RCA inputs. See picture for more information.

It can also be used with any other RCA Stereo output on a device such as an Xbox 360 to passthrough the audio through the PC Sound card (via Line-In) to the PC Speakers or an amplifier / receiver which has RCA inputs. See attached picture for information.

Related keywords : male rca to 3.5mm, male rca to microphone jack plug, male 3.5mm to mono female rca, convert headphone plug to rca, convert microphone jack to rca, convert microphone plug to rca
Price: R16.00 Manufacturer: HDCabling
Model Number: 3.5mm_Jack_to_RCA_Gold_Plated Added to Inventory on: Friday 25 June, 2010

3x1 (3-port) RCA Switch / AV Selector / Composite Switch
An AV Selector / RCA Switch is commonly used when you have more than 1 AV device (Yellow,Red,White outputs) such as a DVD player, DSTV Decoder, Gaming console etc. and your TV has only 1 AV input (Yellow=Video, Red/White=Audio Left and Right).

With this switch you eliminate plugging / unplugging cables which causes wear and tear on your cable connectors and ports on your TV. Simply slide the input selector to display another input device.

● Package includes 3-RCA (Yellow,Red,White) 1.5 meter cable

Features & Specifications

● Eliminates disconnecting and reconnecting of cables from your AV system.
● 3 stereo AV RCA inputs and 1 stereo AV RCA output.
● Simple switching with 3 input selector switch.
● Dimensions : 170mm W x 50mm H x 70mm D
● Passive design requires no power supply from batteries or AC.

Related Keywords : RCA Mutliple inputs switch, S-video Switch, S-Video Selector, RCA Selector, A/V Selector, Select AV to TV, more inputs RCA selector, Composite selector, Composite inputs to one output, Switch Composite inputs, Yellow RCA more inputs, Switch Yellow RCA inputs
Price: R89.00 Manufacturer: HDCabling
Model Number: 3x1_RCA_Composite_Switch Added to Inventory on: Wednesday 16 September, 2009

4 Way F-Splitter / RF Splitter With DC Power Pass
Will split a single Satellite/Aerial signal into 4 with minimal loss.

A DC passing splitter (1 DC bypass output) is useful when you are sending DC power up the cable for coax powered equipment link an in-line amplifier or infrared signals. Signal frequency 5 - 2400 MHz.

Price: R39.00 Manufacturer: HDCabling
Model Number: 4_Way_RF_Splitter Added to Inventory on: Thursday 21 July, 2011

4-pin RJ11 Telephone Cable connector jack
RJ11 4-pin connector used with telephone cable from fax machines, ADSL routers, analogue telephones etc. 4-core telephone cable are listed at Standard 4-Core Telephone cable . To securely crimp the RJ11 connector onto the telephone cable use the crimping tool at RJ45 / RJ11 / RJ12 Crimping Tool.
Price: R1.20 Manufacturer: HDCabling
Model Number: RJ11_Connector Added to Inventory on: Sunday 05 August, 2012

4x1 (4-port) Component Switch / YPbPr Switch / AV Selector Switch with audio passthrough
A Component Selector for component (3-RCA for video, YPbPr) and Stereo audio switch is commonly used when you have more than 1 AV device with Red, Green, Blue outputs for video and Red / White outputs for audio such as a DVD player, DSTV Decoder, Gaming console etc. and your TV has only 1 Component / YPbPr input.

With this switch you eliminate plugging / unplugging cables which causes wear and tear on your cable connectors and ports on your TV. Simply press a button to switch to another input device.

Features & Specifications

● Model DSW41
● Eliminates disconnecting and reconnecting of cables from your AV system.
● 4 x Component / YPbPr + Stereo RCA audio inputs and Component / YPbPr + Stereo RCA audio output.
● Simple switching with 4 input selector buttons and red input indicator.
● Signal : Y Pb Pr AUDIO R/L
● Input port: Y Pb Pr AUDIO R/L X 4 ports
● Output port : Y Pb Pr AUDIO R/L X 1 port
● Video input : 1v p-p
● Video impedance : 75Ω
● Video gain : 0db
● Audio input : 2.2v p-p
● Audio impedance : 20KΩ
● Audio gain : 0db
● Operating Environment Temperature : -10℃-40℃
● External Dimensions : 245×180×45mm

Related Keywords : Component input switch, 3-RCA Switch, Component video selector, YPbPr Selector switch, A/V Selector, Select AV to TV one input, more inputs component selector
Price: R329.00 Manufacturer: HDCabling
Model Number: 4x1_YPbPr_Component_Switch Added to Inventory on: Thursday 20 August, 2009

4x1 (4-port) S-video and RCA Switch / AV Selector / Composite Switch
An AV Selector / RCA Switch is commonly used when you have more than 1 AV device (Yellow,Red,White outputs) such as a DVD player, DSTV Decoder, Gaming console etc. and your TV has only 1 AV input (Yellow=Video, Red/White=Audio Left and Right).

With this switch you eliminate plugging / unplugging cables which causes wear and tear on your cable connectors and ports on your TV. Simply press a button to switch to another input device.

Features & Specifications

● Eliminates disconnecting and reconnecting of cables from your AV system.
● 4 stereo AV RCA inputs and 1 stereo AV RCA output.
● Alternative connection of 4 AV S-video inputs and 1 AV S-video output.
● Simple switching with 4 input selector buttons and red input indicator.
● Dimensions : 180mm W x 50mm H x 100mm D
● Stereo 3.5mm mini jack for audio monitor output to headphones or speakers using a 3.5mm jack plug.
● Passive design requires no power supply from batteries or AC.
● No conversion between Composite and S-video signals. Ensure that if your input is composite / Yellow RCA that the output is composite / Yellow RCA or use the converter S-Video (4-pin type, VHS) Male to RCA Female Adapter to convert Composite / Yellow RCA sources / players to S-video if needed.
Related Keywords : RCA Mutliple inputs switch, S-video Switch, S-Video Selector, RCA Selector, A/V Selector, Select AV to TV, more inputs RCA selector, Composite selector, Composite inputs to one output, Switch Composite inputs, Yellow RCA more inputs, Switch Yellow RCA inputs
Price: R179.00 Manufacturer: HDCabling
Model Number: 4x1_RCA_Composite_Switch Added to Inventory on: Friday 03 July, 2009

4x2 (4 inputs, 2 outputs) Composite / Yellow RCA Switch / Splitter Combo - AV Selector Switch / Splitter - Includes IR Remote
An AV Selector / RCA Switch is commonly used when you have more than 1 AV device (Yellow,Red,White outputs) such as a DVD player, DSTV Decoder, Gaming console etc. and your TV has only 1 AV input (Yellow=Video, Red/White=Audio Left and Right).

With this switch you eliminate plugging / unplugging cables which causes wear and tear on your cable connectors and ports on your TV. Simply press a button to switch to another input device.

This device also functions as a AV Splitter and will split any of the 4 inputs selected to 2 identical outputs to be connected to 2 independant TV's.

Features & Specifications

● Eliminates disconnecting and reconnecting of cables from your AV system.
● 4 stereo AV RCA inputs and 2 stereo AV RCA outputs.
● Simple switching with 4 input selector buttons and input indicators.
● Use the switch as a splitter to enable content to be viewed on 2 different TV's.
● Dimensions : 180mm W x 50mm H x 100mm D
● Direct 220 volt plug connection, signal is re-generated and no loss of signal will occur.

4 port, 2 outputs Composite RCA Switch Splitter Combo with IR Remote
Related Keywords : RCA Mutliple inputs switch, S-video Switch, S-Video Selector, RCA Selector, A/V Selector, Select AV to TV, more inputs RCA selector, Composite selector, Composite inputs to one output, Switch Composite inputs, Yellow RCA more inputs, Switch Yellow RCA inputs, RCA Splitter, Composite Splitter
Price: R379.00 Manufacturer: HDCabling
Model Number: 4x2_Composite_Switch_Splitter Added to Inventory on: Monday 14 June, 2010

4x2 Wall Cover Plate Modular - 2 Holes Single Electrical Plug Size (White)
HTML Online Editor Sample

Inserts that can be used on this wall plates are:

Wall Plate Modular Blank Module Insert

Wall Plate Modular RCA Female to RCA Female Module Insert

Wall Plate Modular F-Type Barrel Module Insert

Wall Plate Modular RJ11 Telephone Module Insert

Price: R19.00 Manufacturer: HDCabling
Model Number: Wall_plate_4x2_2_hole Added to Inventory on: Tuesday 20 November, 2012

4x4 Wall Cover Plate Modular - 2 Holes Double Electrical Plug Size (White)
HTML Online Editor Sample

Inserts that can be used on this wall plates are:

Wall Plate Modular Blank Module Insert

Wall Plate Modular RCA Female to RCA Female Module Insert

Wall Plate Modular F-Type Barrel Module Insert

Wall Plate Modular RJ11 Telephone Module Insert

Price: R27.00 Manufacturer: HDCabling
Model Number: Wall_plate_4x4_2_hole Added to Inventory on: Tuesday 20 November, 2012

4x4 Wall Cover Plate Modular - 4 Holes Electrical Plug Size (White)
HTML Online Editor Sample

Inserts that can be used on this wall plates are:

Wall Plate Modular Blank Module Insert

Wall Plate Modular RCA Female to RCA Female Module Insert

Wall Plate Modular F-Type Barrel Module Insert

Wall Plate Modular RJ11 Telephone Module Insert

Price: R27.00 Manufacturer: HDCabling
Model Number: wall_plate_4x4_4_hole Added to Inventory on: Saturday 09 March, 2013

7.8 meter Digital RCA Audio Cable 22AWG M/M 75ohm RG59/U - S/PDIF, Digital Coaxial, Subwoofer
This CABLE is for:

HDPVR Digital Coaxial (Dolby Digital 5.1 Audio)
Standard PVR Digital Coaxial (Dolby Digital 5.1 Audio)
DVD Player
DVD Audio Player
SA-CD Player
CD Player
D-VHS Player
Game Console
A/V Receiver
Digital Video Recorder
Satellite Receiver
Digital Cable Box
Computer sound card with digital coaxial audio output
Active Subwoofer
Home Theater Personal Computer (HTPC)

This cable connects dvd players to audio receivers, Sattelite boxes and cable boxes to audio receivers, computer audio equipment, and any other equipment that supports Coax(S/Pdif) interface interconnect. Lastest model DSTV Decoders & DSTV HDPVR also use the Coaxial Optical out to provide true Dolby Surround Sound to a dolby amplifier / receiver.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.

This cable allows jitter-free transfer of digital audio signals. The low-loss cable design includes pure copper center conductor and shielding to preserve signal strength and minimize noise. Gold-plated, RCA connectors and pins to give you solid, corrosion-free contact.

Features:

Connectors :

- Single RCA Plug(male) to single RCA Plug(male).
- 24k Gold Plated connectors ensure long-lasting, corrosion-free connections.
- Fully molded connecters provide excellent strain relief.
- High-quality coax wire with copper braid shield reduces unwanted noise and distortion.
- Easy installation with non-slip rubber grip.
- Improves digital signal delivery as compared to standard RCA type audio cables.
- True digital signal maintained by high materials and connectors 99.999% Pure Copper Non-OFC conductor.
- High-density double shielding for max rejection of EMI and RFI.

What is SPDIF? - S/PDIF (Sony/Philips Digital Interface) is a standard audio transfer file format. It is usually found on digital audio equipment such as a DAT (Digital Audio Tape) machine, PC Sound Cards or audio processing device. It allows the transfer of audio from one file to another without the conversion to and from an analog format, which could degrade the signal quality.

Related Keywords : digital audio cable, digital surround sound cable, premium video cable, digital audio video cable
Price: R125.00 Manufacturer:
Model Number: 7.8m_Coaxial_Digital_RCA Added to Inventory on: Monday 20 October, 2008

90 degree Aerial Coax RF Right Angle Port Saver Male Connector
This protects your RF port on your TV when mounted against the wall.
Price: R3.90 Manufacturer: HDCabling
Model Number: RF_Right_Angle_Male_Connector Added to Inventory on: Friday 30 November, 2012

Barrel type F-Type / Compression FConnector - Nickel Plated
The F connector is a common means of connecting television signals. It is a type of coaxial RF connector commonly used for "over the air" terrestrial television, cable television and universally for satellite television and cable modems, usually with RG-6/U cable listed at RG6/U cable, 75 Ohm, 64 Braid or, in older installations, with RG-59/U cable.

This F-type compression connector is intended for use with RG-6 Quad-shielded cable. It features a solid aluminum body and plastic compression seal.

The F connector is inexpensive, yet has good 75 Ω impedance match up to 1 GHz and has usable bandwidth up to several GHz. One reason for its low cost is that it uses the solid conductor (center wire) of the specified types of coaxial cable as the pin of the male connector. This design is subject to the surface properties of the inner conductor (which must be solid wire) and is not corrosion resistant, hence water proof versions are needed for outside use (for example, on aerials).

The male connector body is typically crimped, or sometimes screwed, onto the exposed outer braid.

To convert an F-Type connector to an RCA male end on both ends of the cable use the connector at Female F-Type to Male RCA Adaptor.

Price: R5.90 Manufacturer: HDCabling
Model Number: Barrel_Ftype Added to Inventory on: Friday 05 August, 2011

BNC Crimp-on Connector

BNC crimp on plug used on RG59 (CCTV / Coaxial Cable).

These BNC crimp on plugs can be used together with RG59 75 Ohm cable to make up Serial digital interface (SDI) cable. Serial digital interface (SDI) is a family of digital video interfaces, that require greater fidelity and resolution than standard HDTV can provide

All of our adapters feature high grade materials and quality connectors that provide secure connections.  Each of these are rated to smoothly transfer 75ohm signals.

Price: R4.70 Manufacturer: HDCabling
Model Number: BNC_Crimp on plug Added to Inventory on: Friday 10 May, 2013

BNC to VGA / Svideo to VGA Converter (Connect CCTV to VGA Screen)
The BNC connector is primarily used on CCTV camera systems. Connect these systems directly to a cost effective VGA Screen with a better resolution than standard CCTV monitors which are much more expensive than standard VGA displays.

You can also connect any DVD Player, DSTV or any device with a svideo port to the device to be converted to display on a VGA screen. Use a composite to Svideo cable if the device has a composite (Yellow RCA) output only.

Specifications

● Transform AV into VGA signal
● 1 channel BNC input
● 1 channel S-video input
● 1 channel VGA signal input
● 1 channel VGA signal output
● DC-5V outside power supply
● Supports signal: VIDEO (Composite), BNC Connections, S-VIDEO, VGA
● Support system : PAL/NTSC Output
● Resolution: 800×600@60HZ,800×600@75HZ,1024×768@60HZ
● Dimentions : 10 x 6 x 3 cm (4.0 x 2.25 x 1.0 in.)
● Can adjust lightness, contrast, color saturation etc.
● Image freeze
● Save current work state when the power cut
● Caption prompt in work state

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

** NOTE!! - Composite / BNC has a limitation of 480 scanlines / 480i resolution (more or less equal to 640 x 480) which is a limitation by international specification and not a limitation of the converter. The converter will supply the same resolution output as input (up to 1024 x 768)

Related Keywords : composite to vga adapter, composite to vga converter, rca to vga adapter, rca to vga converter, svideo to vga adapter, s-video to vga converter.
Price: R539.00 Manufacturer: HDCabling
Model Number: BNC_to_VGA_Adapter Added to Inventory on: Monday 21 December, 2009

Cable Bundle - 3.5mm to 2xRCA, 1.5m VGA to VGA Male, 1.5m Component / YPbPr Cable
Cable bundle includes :

- 1 x 1.5m High Shield VGA / RGBHV / D-Sub Male to male cable
- 1 x 1.5m Component video cable / YPbPr cable - Up to 1080i resolutions.
- 1 x 1 meter 3.5mm Male Jack to 2 x RCA cable (Used for most PC asound cards to external speakers or amplifier connection).

This cable bundle is commonly used with the HDFURY pro product as listed at HDFURY Pro - HDMI to Component / VGA Converter.

Price: R69.00 Manufacturer: HDCabling
Model Number: Cable_Bundle Added to Inventory on: Monday 11 October, 2010

Coaxial (RCA) to Optical Toslink Digital Audio Converter
You can Plug your Digital Audio Coax in and get Toslink Digital Optical Out.
This can transform a digital RCA Coaxial (S/PDIF) audio signal to a Digital Toslink Optical signal.

This coaxial to optical converter will allow you to connect the coaxial digital audio output from your DVD, Gaming Console, DSTV Decoder or any other device with a coaxial audio output to a Toslink digital optical input on a digital receiver or amplifier for 5.1 surround sound.

Coaxial Digital Input via RCA jack --> Optical Digital Output via Toslink

Simple installation - connect your cables to the converter and to your devices. We have replaced the 110v USA adapter included with a 220v AC / 6v DC adapter which is included in the purchase price.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this product and for alternative wiring options.

The two digital cables used to connect this adapter can be found below:

- 6ft / 1.8m 1-RCA Coaxial Audio/Video RCA Cable M/M 75ohm - S/PDIF, Digital Coax, Subwoofer & Composite Video (Gold Plated Connectors)

- 6ft / 1.8m Optical Toslink Audio Cable - Gold Plated Connectors / PVC Fiber plug To PVC Fiber plug. Optical Density 5.0mm

Related Keywords : coax adapter, coax switch, coax optical converter, audio cable connectors, audio adapter, toslink converter, fiber optic converter, audio convert, digital convert, optical coax converter, toslink audio
Price: R249.00 Manufacturer: HDCabling
Model Number: Coaxial_Toslink_Converter Added to Inventory on: Monday 09 June, 2008

Component (YPbPr, 3-RCA) + Digital Coaxial Audio over CAT5e/6 Wallplate Extender / Balun - 1080i up to 100m (Full set - Transmitter / Receiver included)
Overcome the distance limitations of extending Component (YPbPr, 3 RCA for video - Red,Green,Blue) and Digital Coaxial Audio (Dolby Digital, DTS, PCM digital audio signals) over long distances by using this extender. Standard CAT5e or CAT6 network cabling can be used to extend the signal from your DSTV decoder, DVD Player, Gaming console or any other device using component video and digital coaxial audio.

Features :

● Wall Plate - Component (YPbPr signal) + Digital Coax CAT5 / CAT6 Extender.
● Send component video signals over one CAT5 / CAT6 UTP cable.
● Transmission range up to 300 meters for video only (180m max for digital audio).
● 3 x RCA female to RJ45 female for video and audio, green color for Y, blue color for Pb, red color for Pr. Coaxial audio plugs into orange RCA connector. See enlarged picture on the right.
● Wall mountable type for a neat and cleaner installation.
● Passive, no power required.
● Support for HDTV resolutions - 480i / 480p / 720p / 1080i
● Perfect for iintegration with your current home entertainment applications.

Related Keywords : video over cat6, component over cat5, component over cat6, component over ethernet, YPbPr over cat5, YPbPr over cat6, YPbPr over ethernet, audio over cat5, audio over cat6, audio over ethernet, audio over network cabling, video over network cabling, transmit video longer distance, video repeater, audio repeater
Price: R579.00 Manufacturer: HDCabling
Model Number: YPbPr_Wallplate_CAT5 Added to Inventory on: Saturday 05 December, 2009

Component Video & Digital Coaxial Dolby Digital Audio Balun / Extender over CAT5e/CAT6e up to 305 meter

Overview

This set is used to transmit Component (Green,Blue,Red) Video (or also known as YPbPr video) over long distances via networking CAT6e STP cable. The Component Video/DiditalAudio Balun (MB-COVDAB) allows one component video (YPbPr or RGB) signal and one Digital Audio signal to be transmitted via one Category 5e/6 twisted pair cable for more cost-efficient cabling.Used in pairs , the ComponentVideo / Digital Audio Balun supports 480i/p,720p and 1080i video formats.

Features & Benefits

  • Rental & staging, venues
  • Camcorder connections
  • Mobile video production
  • Podium presentation systems.
  • Supports 480i/p, 720p, 1080i/p
  • Supports 480i/p up to 1,000 ft (305m) via Cat5E/6
  • Supports 720p/1080i/p up to 500 ft (152m) via Cat5E/6
  • Supports Digital audio on Thirdtwisted pairup to 600 ft(200m)
  • Cost-efficient cabling
  • Quicker moves, adds and changes

Quick Setup Guide

  • Plug the RCA connectors of the transmitter Balun into the Video and Audio outputs of the source component you wish to transmit. Plug the Video and Audio connectors from the receive Balun into your desired input component.
  • Insert the CAT5/CAT6e cable into both ends of the Baluns. Use standard EIA 568A/B termination on RJ45 Connectors.

Typical Application

Specifications:

Environment Component Video (YPbPr), RGB Video (sync on green). 480i/p, 720p, 1080i/p. Linelevel Digital audio.
Devices DVD players, satellite receivers, plasma displays, projectors, monitors, up-converters,amplifiers, switchers, home theatre and other equipment supporting HDTV componentvideo and/or Digitalaudio.
Transmission Transparent to the user.
Bandwidth Video: 60 MHz, 3 dB roll offDigital Audio: 25M Hz
Maximum Input Video :1.1Vp-p, Audio :1.1Vp-p
Insertion Loss per Pair (Video) 0.1 dB for 0.1 MHzGradually increasing to 3.0 dB over the frequency range
Insertion Loss per Pair (Audio) Less than 2 dB per pair over the frequency range
Common Mode Rejection Ratio(Audio) Greater than 60 dB @ 1K HzGreater than 40 dB over the frequency and distance range
Max. Distance Color viaCat 5E/6 UTP/STP Cable 480i/p: 1,000 ft (305 m)720p and 1080i/p: 500 ft (152 m)digital audio: 600 ft(200m)
Cable:Cat 5E/6 UTP/STP 24 AWG or lower solid copper twisted pair wireImpedance: 100 ohms at 1 MHzMaximum capacitance: 20 pf/ftAttenuation: 6.6 dB/1,000 ft at 1 MHz
Cable: Coax Impedance: 75 ohms at 1 MHz
Connectors Three RCA-F connectors: Green (Y), Blue (Pb), Red (Pr)One  RCA-F connector for DigitalaudioRJ45for twisted pair
Pin ConfigurationReverse polarity sensitive Red (Pr): Pins 7(R) & 8(T) Green (Y): Pins 3(R) & 6(T)Blue (Pb):Pins 1(R) & 2(T) Digtal  Audio: Pins 4(R) & 5(T)
Temperature Operating: 0° to 55°CStorage: -20° to 85°CHumidity: Up to 95% non-condensing
Enclosure Aluminum alloy
Dimensions(packaging) 7.5*26*151mm(including one pair of Balun)
Weight(packaging) 170g

NOTE: Baluns are interchangeable for transmit or receive functions.

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Price: R699.00 Manufacturer: HDCabling
Model Number: YPbPr_Balun_with_Audio Added to Inventory on: Saturday 24 November, 2012

Composite (Yellow RCA) + Stereo Audio over CAT5e/6 Wallplate Extender / Balun - Up to 300m (Full set - Transmitter / Receiver included)
Overcome the distance limitations of extending Composite Video (Yellow RCA) and Stereo Audio (Red/White) over long distances by using this extender. Standard CAT5e or CAT6 network cabling can be used to extend the signal from your DSTV decoder, DVD Player, Gaming console or any other device using composite / Yellow RCA video and stereo audio.

Features :

● Wall Plate - Composite Video + Left/RRight stereo CAT5 / CAT6 Extender.
● Send video and stereo audio over one CAT5 or CAT6 UTP cable.
● Wall mountable type for a neat and cleaner installation.
● 3 x RCA female connectors (1 x video, 2 x RCA for stereo audio).
● Passive, no power required.
● Transmission range up to 300 meters.
● Perfect for integration with your current home entertainment setup.

Related Keywords : video over cat6, composite over cat5, composite over cat6, composite over ethernet, audio over cat5, audio over cat6, audio over ethernet, audio over network cabling, video over network cabling, transmit video longer distance, video repeater, audio repeater
Price: R479.00 Manufacturer: HDCabling
Model Number: Composite_Wallplate_CAT5 Added to Inventory on: Saturday 05 December, 2009

Composite/ RCA(Yellow White Red) Balun Extender 305 Meter with IR pass-throught

Passive Audio/Video Baluns, Composite video plus analog audio L/R. Send composite video signals over single Cat5e cable. It also supports IR pass-through.

 

Features:

  • Connectors:
  • Red/White-Audio
  • Yellow-Video
  • (1) RJ45 Socket for twisted pair
  • IR Pass-throught
  • Maximum Distance Color
  • Cat 5 UTP & STP: Color Video: 305 meter
  • Audio: 305 meter
  • Impedance: 100 ohms at 1MHz
  • Maximum capacitance: 6.096pf/meter
  • Attenuation: 6.6 dB/1000 ft at 1MHz
  • Dimensions: 4" x 2" x 1"
Price: R699.00 Manufacturer: HDCabling
Model Number: Composite_RCA(Yellow_White_Red Added to Inventory on: Wednesday 28 November, 2012

Custom Length (up to 30m) Digital RCA Coaxial Audio Cable (or Composite Video) M/M 75ohm RG6U - S/PDIF, Digital Coaxial, Subwoofer (Price on 5 Meter Cable - Selectable)
Below you can select the length required for your custom made Digital RCA male to male cable. These high quality cables can also be used for standard composite video, component video or analog audio over long distances. Custom made cables takes 1 day to assemble and payment for order is required before cable will be cut to length.

This CABLE is for:

HDPVR Digital Coaxial (Dolby Digital 5.1 Audio)
Standard PVR Digital Coaxial (Dolby Digital 5.1 Audio)
DVD Player
DVD Audio Player
SA-CD Player
CD Player
D-VHS Player
Game Console
A/V Receiver
Digital Video Recorder
Satellite Receiver
Digital Cable Box
Computer sound card with digital coaxial audio output
Active Subwoofer
Home Theater Personal Computer (HTPC)

This cable connects dvd players to audio receivers, Sattelite boxes and cable boxes to audio receivers, computer audio equipment, and any other equipment that supports Coax(S/Pdif) interface interconnect. Lastest model DSTV Decoders & DSTV HDPVR also use the Coaxial Optical out to provide true Dolby Surround Sound to a dolby amplifier / receiver.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.

This cable allows jitter-free transfer of digital audio signals. The low-loss cable design includes pure copper center conductor and shielding to preserve signal strength and minimize noise. Gold-plated, RCA connectors and pins to give you solid, corrosion-free contact.

Features:

Connectors :

- Single RCA Plug(male) to single RCA Plug(male).
- Gold Plated connectors ensure long-lasting, corrosion-free connections.
- High-quality coax wire with copper braid shield reduces unwanted noise and distortion.
- Easy installation
- Improves digital signal delivery as compared to standard RCA type audio cables.
- True digital signal maintained by high materials and connectors.
- High-density double shielding for max rejection of EMI and RFI.

What is SPDIF? - S/PDIF (Sony/Philips Digital Interface) is a standard audio transfer file format. It is usually found on digital audio equipment such as a DAT (Digital Audio Tape) machine, PC Sound Cards or audio processing device. It allows the transfer of audio from one file to another without the conversion to and from an analog format, which could degrade the signal quality.

Related Keywords : digital audio cable, digital surround sound cable, premium video cable, digital audio video cable, coaxial cable, RG6U digital cable, RG59U digital cable
Price: R0.00 Manufacturer: HDCabling
Model Number: Custom_Coaxial_Digital_RCA Added to Inventory on: Sunday 27 June, 2010

DC Block Termination Connector
Used to block a DC voltage when not required. For example, use on devices which automatically send a voltage along a coaxial cable to power remote devices.

Frequency Range : 950-2050MHz
Through Loss : 0dB
Connections : F-female / FType / FConnector
Price: R35.00 Manufacturer: HDCabling
Model Number: DCBlock_FType Added to Inventory on: Sunday 12 June, 2011

Digital Audio / Coaxial or Optical Toslink to Analogue Stereo RCA Audio Converter
This converter will decode digital Coaxial RCA Dolby digital or Optical Toslink Dolby digital audio to analogue RCA (Red/White - Left/Right) audio. It is commonly used to connect an Apple TV with optical toslink audio output to an amplifier which has analogue input.

Specifications

● Input : Digital Coaxial or Optical Toslink audio
● Output : Red/White Stereo RCA (Left / Right Channels)
● Power supply included

Price: R529.00 Manufacturer: HDCabling
Model Number: Toslink_Coaxial_to_RCA_Stereo Added to Inventory on: Thursday 21 July, 2011

DTS,AC3 or Dolby Digital (Optical or Coaxial) to analogue surround sound converter (5.1 RCA outputs) with IR Remote and Dolby Prologic Encoder

I : Overview:

This converter allows you to connect the digital DTS, AC3 or Dolby Digital 5.1 / 2.0 output from a DVD Player, Blu-ray player, HDPVR, PC audio card or any other source device with a optical toslink or coaxial RCA output to an amplifier with analogue inputs. The built-in audio decoder will decode incoming Toslink or digital coaxial RCA stream to 6 x RCA outputs that featues Front Left/Right, Centre, Subwoofer and Rear (Surround) Left/Right analogue audio outputs.

Features:

1.High-grade aluminum alloy sheets, elegant black

2. High school bass volume control, six-channel output volume control the size, respectively, left and right channel volume balance adjustment

3. Easy switch the stereo and 5.1CH Output

4. Automated channel test

5. LED screen display and LED indicator brightness adjustment

6. DTS / Dolby AC-3/PCM Automatic Identification

7. With different audio DSP sound field

8. Analog stereo input and analog 5.1CH output

9. Adjust the volume using the encoder, feel better, meanwhile switch input channels feature

10. Multiple input interface: OPTI1, OPTI2, COX1, COX2, R / L AUX

11. Standard RCA input and output interfaces, optical interfaces,

12. Applicable to a variety of entertainment devices, such as X360, PS3/PS2, HD players, DVD / Blu-ray DVD / STB / DM500/DM800, computer sound cards and CD player.

Technical Data:

1. Signal to Noise: 120db

2. Degree of Separation: 85db

3. Frequency Response: (20Hz ~ 20KHz) +/- 0.5db

4. Max Output Volt: 2.2V

5. Power Supply DC/12V1A, (Outlay 110V~240V broadband convert DC12V Power)

6. Dimension: 200x125x45mm

7. Includes IR Remote control 

Receiver window:

AC3: AC-3 signal indicator light

DTS:DTS signal indicator light

PCM: PCM signal indicator light

STEREO: stereo output indicator light

Prologi: 5.1CH output indicator light

MENU: volume level control and the input channels switch keyboard Were down by switching optical fiber, coaxial, analog audio input channels

Clockwise rotation as the volume increases or reduce.

Standby Mode will show “- - - -”And start it need pressing MENU key or STANDBY key on the remote control  

Back Panel Features:

OPT1: Optical 1 input interface

OPT2: Optical 2 input interface

COX1 / 2: Coaxial input

AUX R / L: Analog stereo input

CEN: the CEN output

SW: Subwoofer output

SL: Left surround output

SR: Right surround output

FL: Front left output

FR: Front right output

DC: Power input (DC12V)

OFF / ON: Power switch (ON is open; OFF is off)   

Remote Control Function:

1 --- STANDBY: Standby / Power button

(press this key, the display is ----)

2---OPT1/OPT2: Straight into the OPT1 or OPT2 input channels

3 --- COX1 / 2: Straight into the COX1 or COX2 input channels

4 ---C.DELAY + / 1: Delay CEN increase or decrease

5 --- S.DELAY + / -: Surround delay plus and minus

6 --- TEST: channel decoder built-in self test (connected

and audible amplifier machine, the noise output from the

six-channel output respectively)

7 ---LISTEN: 5.1 channel and stereo output switching key

8 --- MUTE: Mute button (Press this button, LED screen

will flash the current volume status, but no sound output, then return to normal)

9 ---BASS + / -: Bass adjust key (range-12db ~ 12db,

default 0db)

10 ---CEN + / -: CEN adjust key (range 0db ~ 14db,

default 7db)

11 --- SL + / -: Left Surround adjust key(range 0db ~ 14db, default 7db)
12 --- REST: Reset button (press this button, all settings back to the initial settings)

13 --- AUX1/AUX2: Straight into the analog input channels

14---DIMMER + / -: LED display and lights synchronized height adjustment

15---SPEAKER: Big and small speaker adjust key (the display shows ON / OFF)

16 --- DSP: Different acoustic sound switch keys (three)

17 --- VOL + / -: Total volume adjust key (press this button control the volume size)

18 --- L / R: left and right channel balance switch (press the L / R in this key, adjust the left and right balance, range 0db ~ 14db, 7DB is left and right balance)

19---TREBLE + / -: Treble volume size adjust keys (range-12db ~ 12db, default 0db)

20 - SR + / -: Right  Surround volume size adjust key (range 0db ~ 14db, default 7db)

21 -- SW + / -: Bass volume size adjust key (range 0db ~ 14db, default 7db)

Packing List:

 

Accessory name

Qty

Remarks

Digital Audio Decoder

1 pcs

 

DC12V/1A  Power

1 pcs

 

Remote Control

1 pcs

 

Fiber Optic Cable

1 pcs

 

User Manual

1 pcs

EN

 

 Warning

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE:                                                          

1. Do not expose this apparatus to rain, moisture, dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on the apparatus.

2. Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the unit is well ventilated.

3. To prevent risk of electric shock or fire hazard due to overheating, do not obstruct the unit's ventilation openings with newspapers, tablecloths, curtains and similar items.

4. Do not install near any heat sources such as radiators, heat registers, Stoves or other apparatus.

5. Do not place sources of naked flames, such as lighted candles on the unit.

6. Clean this apparatus only with dry cloth.

7. Unplug this apparatus during lighting storms or when unused for
long time

8. Protect the power cord from being walked on or pinched, particularly at plugs.

9. Only use attachments/accessories specified by the manufacture

10. Refer all servicing to a qualified service personnel.

Price: R779.00 Manufacturer: HDCabling
Model Number: Toslink_Coaxial_to_Analog_3.5m Added to Inventory on: Monday 10 October, 2011

External LCD TV Converter / Tuner - Convert RF to VGA (incl UHF/VHF Scanner) & RCA to VGA
This TV tuner is mostly used to convert any older DVD Players, Previous DSTV SD PVR Video and other analog device with a yellow RCA / Composite, Component (YPbPr) or coaxial RF output to a standard VGA signal used on PC Screens and LCD's having a RGB / VGA input.

Features

● Watch broadcast, cable or satellite TV on LCD/CRT/plasma monitor or projector.
● Directly connects to monitor or projector — no computer, software or driver required.
● Built-in TV tuner and multiple video ports support DVD, game consoles and digital cameras.
● Enhanced 3D motion-adaptive de-interlacing delivers clear, stable images with up to 1280 x 1024/1440 x 960 resolution.
● Easy installation and function control with automatic source mode detection, automatic channel scanning and programming, adjustable high-resolution output mode and multi-language on-screen display.
● Full-function remote control selects channels, input source, volume and more from anywhere in the room.
● Video standards: NTSC/PAL/SECAM (for Composite and S-video)
● Dimensions : 10 x 18 x 2.8 cm (3.9 x 7.1 x 1.1 in.); 252 g (8.9 oz.)
● Resolution output: 640 x 480, 800 x 600, 1024 x 768, 1280 x 1024/1440 x 960 (60 Hz)
● Monitor support: VGA/SVGA/XGA/SXGA (VGA input port required)
● Input ports: coaxial (RF), composite video, S-video, composite audio, PC sound card line-out and 7.5 V / 1 A power port
● Output ports: VGA 15-pin DB and audio output to speaker (or sound card line-in)

Package Contents

● LCD TV Converter/Tuner with stand
● Remote control (battery included)
● 8-pin to DB15 and audio cables
● Power adapter
● User manual

PRODUCTS WITH A BUILT-IN TV TUNER MAY NOT BE USED WITHOUT A VALID TV LICENSE

Related Keywords : rgb to vga converter, rca to vga converter, composite to vga converter, aerial to vga converter, coaxial to vga converter, rgb to vga, rca to d-sub converter, composite to d-sub converter, aerial to d-sub converter, coaxial to d-sub converter, rca to rgb converter, composite to rgb converter, aerial to rgb converter, coaxial to rgb converter.

Price: R529.00 Manufacturer: HDCabling
Model Number: External_TV_Tuner Added to Inventory on: Wednesday 16 March, 2011

Female (and Male) Stereo RCA to Female 3.5mm Socket cable (Stereo RCA to 3.5mm for headphones)
Common uses:

Connects any Stereo RCA Out (Red/White) to Headphones or PC Speakers when using a stereo 3.5mm jack plug.

● Input : 2 x Red/White RCA Connectors (Female)
● Output : 2 x Red/White RCA Connectors (Male) + 3.5mm Stereo 3.5mm Socket plug to connect to 3.5mm jack plug / Headphones or PC Speakers.

This cable is commonly used together with 1.6m - 4 in 1 HD Component Cable For Wii, Xbox 360, PS3/PS2, XBOX 360 VGA Cable with Optical Toslink or Stereo Audio or PS3 VGA Cable / Wii VGA Cable (2-in-1) with Stereo RCA Audio when using a PC LCD Screen / CRT Screen for your gaming console and using PC Speakers / Headphones for audio.

Related Keywords : 3.5 mm to rca cable, rca cable, rca audio cable, rca female cable, rca jack, 3.5 mm rca cable, rca plug, rca cables, stereo rca 3.5mm cable
Price: R39.00 Manufacturer: HDCabling
Model Number: RCA_to_3.5mm_Cable Added to Inventory on: Saturday 31 October, 2009

Female BNC to Female BNC - BNC Coupler / Socket - Gold Plated
All of our adapters feature high grade materials and quality connectors that provide secure connections. Each of these are rated to smoothly transfer 75ohm signals.

This is a female to female BNC coupler for connecting together to male twist lock BNC ends.

Price: R19.00 Manufacturer: HDCabling
Model Number: BNC_Coupler_Gold_plated Added to Inventory on: Tuesday 23 February, 2010

Female BNC to RCA Male Adapter
All of our adapters feature high grade materials and quality connectors that provide secure connections. Each of these are rated to smoothly transfer 75ohm signals.

This connector has a female BNC connector and a male RCA jack.
Price: R19.00 Manufacturer: HDCabling
Model Number: BNC_ Female_ to_RCA_Male Added to Inventory on: Tuesday 23 February, 2010

Female F-Type Connector to BNC Male Adaptor - Gold Plated
Use this connector to convert standard F-Type Male connectors listed at Male F-Type Connector to a BNC Male connector. This solution provides a cheaper alternative than buying expensive long distance BNC cables, have less signal loss than low quality BNC cable and the RG / Coax cable can be cut to length required.

PLEASE NOTE! Do not use these adapters to connect an RF antenna signal into a Composite video BNC port or visa versa. When using this for composite signals, you should have an BNC adapter on both ends or BNC on one end and Composite / Yellow RCA on the other end.

Note!! Be very careful when inserting the coax or it will bend the internal conductor and render the connector unusable.
Price: R19.00 Manufacturer: HDCabling
Model Number: BNC_Male_to_F_Type_Female Added to Inventory on: Tuesday 30 March, 2010

Female F-Type Connector to RCA Male Adaptor - Gold Plated
Use this connector to convert standard F-Type Male connectors listed at Male F-Type Connector to a RCA Male connector. This solution provides a cheaper alternative than buying expensive long distance RCA cables, have less signal loss than low quality RCA cable and the RG / Coax cable can be cut to length required. If you need to transmit high quality digital audio, the factory molded high quality RG59U Digital Coaxial RCA cables on the website must still be used.

PLEASE NOTE! Do not use these adapters to connect an RF antenna signal into a Composite video signal or visa versa. When using this for composite signals, you should have an RCA adapter on both ends.

Note!! Be very careful when inserting the coax or it will bend the internal conductor and render the connector unusable.
Price: R19.00 Manufacturer: HDCabling
Model Number: RCA_Male_to_F_Type_Female Added to Inventory on: Wednesday 17 March, 2010

Female RCA to BNC Male Connector - Gold Plated
Use this adapter to convert a standard RCA Male connector to a BNC Male connector.

- Connector Impedance : 75 Ohm
Price: R19.00 Manufacturer: HDCabling
Model Number: Female_RCA_to_BNC_Male Added to Inventory on: Tuesday 30 March, 2010

Female RCA to RCA Female Coupler / Socket
This coupler / socket connects two male RCA plugs, or it can be used as a gender changer male to female.

It is commonly used to extend the cables below depending on the type of usage and cable length required. Note that RCA analog and digital signals attenuate over long distances and is dependant on the equipment signal strength for maximum distance.

- 1.8 Meter Digital Coaxial RCA Cable RG59

- 7.8 Meter Digital Coaxial RCA Cable RG59

- 1.8m 5-RCA Component Video/Audio Coaxial Cable (RG-59/U)

- 7.8 Meter VGA to 3-RCA component video cable (HD15/RGB to 3-RCA)

Related keywords : rca gender changer, female rca to rca female, female rca socket, socket rca female, rca change to female, rca to rca, rca extend, longer rca cables, extend rca cables, connect rca cable, rca cable extend

Price: R9.00 Manufacturer: HDCabling
Model Number: Extend_RCA_Coupler Added to Inventory on: Wednesday 03 December, 2008

Female RCA to S-Video Male Adapter (Bi-Directional, 4-pin type Svideo, VHS) - Gold Plated
If you've got a composite (yellow RCA) signal and only s-video jacks available on your equipment, or visa versa, this handy little bi-directional S-Video / Composite RCA (Yellow RCA Plug) Video adapter will do the trick. Convert from S-Video to Composite RCA Video or Composite to S-Video. High quality, gold plated connectors ensure a secure connection.

This connector has a Male S-Video connector to connect to an S-Video port on your equipment and a female RCA connector to connect to the male RCA connector on your cable.

Related Keywords : convert svideo to RCA, convert s-video to RCA, convert svideo to composite video, svideo to yellow rca, composite video to svideo, composite to s-video, svideo adapter to rca, rca to svideo adapter.
Price: R25.00 Manufacturer: HDCabling
Model Number: Svideo_Male_to_RCA_Female Added to Inventory on: Monday 22 June, 2009

Female Stereo RCA to Female 3.5mm Socket / Coupler : 2-Piece Kit (RCA to 3.5mm for headphones)
Common uses:

Connects any Stereo RCA Out (Red/White) to Headphones or PC Speakers when using a stereo 3.5mm jack plug.

This kit is commonly used together with 1.6m - 4 in 1 HD Component Cable For Wii, Xbox 360, PS3/PS2, XBOX 360 VGA Cable with Optical Toslink or Stereo Audio or PS3 VGA Cable / Wii VGA Cable (2-in-1) with Stereo RCA Audio when using a PC LCD Screen / CRT Screen for your gaming console and using PC Speakers / Headphones for audio.

Please click the "Click to Enlarge" on the right to see common uses of this adapter kit. Adapters A & B is included in the kit.

These adapters functions bi-directionally and can be used in any combination.

Common combinations for kit:

- Stereo 3.5mm jack plug converts to stereo 3.5mm socket : Adapter B only.
- Stereo RCA converts to 3.5mm stereo jack plug : Adapter A only.
- Stereo RCA converts to 3.5mm stereo socket : Adapters A & B.
- Stereo 3.5mm jack plug converts to stereo female RCA : Adapters B & A.

Related Keywords : 3.5 mm to rca adapter, rca adapter, rca audio adapter, rca female adapter, rca jack, 3.5 mm rca adapter, rca plug, rca adapters, stereo rca 3.5mm adapter
Price: R34.00 Manufacturer:
Model Number: RCA_to_3.5mm_Converter Added to Inventory on: Sunday 10 August, 2008

Female Svideo to RCA Male Adapter (Bi-Directional) - Gold Plated
If you've got a s-video signal and only composite (yellow RCA) jacks available on your equipment, or visa versa, this handy little bi-directional S-Video / Composite RCA (Yellow RCA Plug) Video adapter will do the trick. Convert from S-Video Female to Composite Male RCA Video or Composite to S-Video. High quality, gold plated connectors ensure a secure connection.

This connector has a Female S-Video connector to connect to an S-Video Male cable and a Male RCA connector to connect to the RCA input on your TV.

Related Keywords : convert svideo to RCA, convert s-video to RCA, convert svideo to composite video, svideo to yellow rca, composite video to svideo, composite to s-video, svideo adapter to rca, rca to svideo adapter.
Price: R19.00 Manufacturer: HDCabling
Model Number: Svideo_female_to_RCA_Male Added to Inventory on: Tuesday 22 September, 2009

Male BNC to RCA Male Adapter
All of our adapters feature solid connectors that provide secure connections. Each of these are rated to smoothly transfer 75ohm signals.

This connector has a male twist lock, BNC connector and a male RCA plug.

Price: R25.00 Manufacturer:
Model Number: BNC_Male_to_RCA_Male Added to Inventory on: Tuesday 23 February, 2010

Male RCA to RCA Male Coupler / Jack
This connector connects two female RCA plugs, or it can be used as a gender changer female to male.

It is commonly used to extend the cables below depending on the type of usage and cable length required. Note that RCA analog and digital signals attenuate over long distances and is dependant on the equipment signal strength for maximum distance.

- 1.8 Meter Digital Coaxial RCA Cable RG59

- 7.8 Meter Digital Coaxial RCA Cable RG59

- 1.8m 5-RCA Component Video/Audio Coaxial Cable (RG-59/U)

- 7.8 Meter VGA to 3-RCA component video cable (HD15/RGB to 3-RCA)

Related keywords : rca gender changer, male rca to rca male, male rca jack, jack rca male, rca change to male, rca to rca male, rca extend, longer rca cables, extend rca cables, connect rca cable, rca cable extend

Price: R11.00 Manufacturer:
Model Number: Male_Male_RCA_Coupler Added to Inventory on: Tuesday 22 September, 2009

Mutliple SCART to AV / Composite (Yellow, Red,White) and Svideo Adapter - Selectable Input / Output function
Use this connector to convert from SCART output to standard AV (Yellow RCA, Composite video) and stereo RCA audio (Red/White Connectors) or from Composite video to SCART input on device selectable via switch. Svideo sources also supported

Related keywords : RCA to SCART, SCART to RCA, SCART adapter, SCART input, SCART convert, SCART from composite video, composite SCART Adapter.
Price: R39.00 Manufacturer: HDCabling
Model Number: Selectable_SCART_to_AV Added to Inventory on: Wednesday 08 December, 2010

PAL to NTSC or NTSC to PAL Powered Converter - Composite / Yellow RCA video & Stereo audio
This converter will allow you to connect international NTSC standard players / sources to any PAL display. The converter also functions bidirectional (selectable via a switch) and can convert PAL sources to connect to NTSC display.

Features

● AV (Yellow RCA / Composite video + Stereo Red/White audio) input for DVD player, set-box, VCR, Xbox game consoles and other devices using compsoite video.
● To achieve a single standard either PAL or NTSC video where different standard TV / video source region of use (such as the NTSC standard video equipment in PAL / SEMAM system regional user) PAL standard video products in NTSC / SECAM system regional user.
Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Specifications

VIDEO input : ------------------ Video signal input (480I/576I)
VIDEO output :----------------- Video Output Interface (PAL / NTSC)
AUDIO in / out put :----------- Stereo input and output interfaces
DC/5V in :---------------------- Power input interface, DC/5V
PAL-NTSC :--------------------- PAL and NTSC output selector switch
LED :---------------------------- Power indicator

Price: R879.00 Manufacturer: HDCabling
Model Number: PAL_to_NTSC_or_NTSC_to_PAL Added to Inventory on: Wednesday 29 December, 2010

PREMIUM 4 way RF Splitter with DC Pass - 5~2400 MHz (Video VCR / TV antenna / Cable TV signal splitter) - Gold Plated finish
This premium signal splitter is able to split a single input signal into multiple separate signals. Convenient and ideal for those who have the need for additional outputs into multiple displays from one source.

Specifications:

Non-power
5~2400 MHz
1 input splits into 4 outputs
4-way F-type splitter

If you need to split a DVD Player, DSTV or any other device using RCA video outputs (Yellow RCA / Composite Video) to multiple rooms use a RCA to RF Converter together with this 4-way Premium Splitter.

Related Keywords: rf splitter, cables splitter, rf tv splitter, tv aerial split, rf adapter splitters, cable tv splitter, vcr signal split, tv antenna splitter
Price: R85.00 Manufacturer:
Model Number: 4_Way_RF_Splitter_F_Type Added to Inventory on: Saturday 16 August, 2008

RCA Audio / Video Splitter Adapter (Y-Splitter) (RCA Male to 2 RCA Female)
Description :

- Combine a dual-subwoofer signal to a single subwoofer input on your amplifier / receiver.
- Split a Stereo RCA signal to 2 x stereo signals.
- Combine 2 x Mono Phono Signals to 1 x Stereo RCA Signal.
- Convert your Audio or Video RCA signal and connect it to two different devices e.g connect DVD player audio to TV and Hi-Fi.

Specifications :

Color : Black
Female RCA Plug Diameter: 8.3mm
Weight : 30g (including packaging)

Related Keywords : rca y-splitter, rca stereo splitter, subwoofer rca connector, dual rca splitter, 2 rca female to 1 rca male adapter, rca audio splitter, rca video splitter, 2 rca splitter, y splitter rca,
Price: R13.00 Manufacturer: HDCabling
Model Number: RCA_Y_Splitter Added to Inventory on: Monday 01 September, 2008

RCA to VGA / AV to VGA Converter (Connect standard AV / RCA player to PC Screen)
Want to watch movies or recorded television programs on your computer monitor that has a VGA or DVI-I port ? This converter will allow you connect your video source devices like VCR's, camcorders or DVD players to your VGA computer monitor. Any source / player with a Composite (Yellow RCA) or S-Video output can be connected to be converted to VGA. You can even keep your computer connected and just switch between inputs. Simple to use. Connection cables and AC power adapter are included.

The opposite converter (to connect your PC's graphics card VGA port to a standard TV with Yellow RCA / Composite or Svideo inputs) are available at VGA to RCA / Svideo Converter - PC to TV.

Specifications

● Transform AV into VGA signal
● 1 channel video input
● 1 channel S-video input
● 1 channel VGA signal input
● 1 channel VGA signal output
● DC-5V outside power supply
● Supports signal: VIDEO, S-VIDEO, CVBS, VGA
● Support system : PAL/NTSC Output
● Resolution: 800×600@60HZ,800×600@75HZ,1024×768@60HZ
● Dimentions : 10 x 6 x 3 cm (4.0 x 2.25 x 1.0 in.)
● Can adjust lightness, contrast, color saturation etc parameter
● Image freeze
● Save current work estate when the power cut
● Caption prompt in work estate

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

** NOTE!! - Composite / Yellow RCA has a limitation of 480 scanlines / 480i resolution (more or less equal to 640 x 480) which is a limitation by international specification and not a limitation of the converter. The converter will supply the same resolution output as input (up to 1024 x 768)

Related Keywords : composite to vga adapter, composite to vga converter, rca to vga adapter, rca to vga converter, svideo to vga adapter, s-video to vga converter.
Price: R539.00 Manufacturer: HDCabling
Model Number: Composite_RCA_to_VGA_Converter Added to Inventory on: Monday 26 October, 2009

RG59 75 Ohm Flexible Coaxial Copper Cable (For SDI Cable, HD CCTV Transmission and other High Quality Coax Transmissions) - Price per Meter)

RG-59 flexible coaxial cable is 75 ohm cable and often used for VHF/UHF receive applications, television and cable applications.

RG59 cable can also be used to make up an Serial digital interface (SDI) cable. Using the RG59 cable together with http://www.hdcabling.co.za/bnc-crimp-on-connecter-p-537.html you will be able to make Serial digital interface (SDI) cable.

Features:
 
  • Solid polythene insulated 1/0.6mm copper clad steel

              conductor, braid screened.

  • PVC Black sheathed overall.

Specifications:
 

Nominal outside diameter : 6.15mm.

Inner diameter : 1/0.64mm

Capacitance : 68pF/m.

Nominal attenuation (10m) : 1.3dB at 100MHz

1.9dB at 200MHz

4.6dB at 1000MHz.

Maximum RF working voltage : 3.5kV peak.

Price: R4.90 Manufacturer: HDCabling
Model Number: RG59_Cable per meter Added to Inventory on: Friday 10 May, 2013

RG6/U Coaxial Cable - 75 Ohm, 64 Braid / Cost per meter - White
RG6/U Quad-shield is the minimum requirement under the latest Australian Standard for digital TV antenna cabling and for all TV antennas cabling for apartments / units (MATV). It is also used for the distribution of Cable TV (CATV) and Satellite TV (SATV) in residential or commercial premises. It features a copper-clad-steel inner conductor. Single-shield, dual-shield and tri-shield versions of RG6/U are available but do not provide adequate EMI shielding.

RG6/U type cables have lower attenuation characteristics than RG59 cable and therefore are suitable for transmission applications of about 200 to 300 meter (depending on source signal strength).

Various cable end connector types are used with RG6U cables including F-Type connectors at Male F-Type Connector on both ends of a cable will create a Male to Male cable. If you need to convert these 2 male ends to a RCA Male connector to have a custom made / long distance RCA cable for analog audio or video transmission use the connector at Female F-Type to Male RCA Adaptor on each end of the cable to screw on the Male F-type connectors to have a Male to Male RCA Cable with a 75 Ohm impedance.
Price: R3.50 Manufacturer: HDCabling
Model Number: RG6U_Cable_64_Braid Added to Inventory on: Thursday 18 March, 2010

RG6U Coaxial Cable Barrel Connector - F-Type / FConnector Female to Female adapter
Barrel Connectors are used to join RG6 Coaxial / RF Cables together with F-Type connectors at the end of each cable.

Threaded "F" barrel (female-female) to join cables or to fit to a wall plate. Use it with threaded male "F" connectors.

Type : Nickel Plated
Price: R3.40 Manufacturer: HDCabling
Model Number: RG6_Barrel_Female_Female Added to Inventory on: Sunday 12 June, 2011

S/PDIF Adapter - 3.5mm Mono Plug to RCA Mono Female Adapter
This adapter is mainly used to connect a 3.5mm S/PDIF digital jack on a computer sound card or portable device to the Digital Coax input on a Receiver or Surround Sound Processor via a Digital RCA Coaxial cable.

Note: Your output device must be able to transmit a digital coax signal. This adapter will not work if your device only outputs L/R analog stereo signals or is a mini toslink optical output.

This product has been tested with the Soundblaster Audigy range 3.5mm digital output to a digital coaxial input on a receiver / amplifier and will work with all soundcards that uses a 3.5mm digital output.

Related Keywords : 3.5mm phono jack to rca, pc digital audio 3.5mm adapter, 3.5mm to rca adapter, convert to rca 3.5mm, convert 3.5mm digital audio to rca out
Price: R9.00 Manufacturer:
Model Number: SPDIF_3.5mm_RCA_Mono Added to Inventory on: Tuesday 02 September, 2008

SCART Composite (Yellow, Red,White) INPUT Adapter
Use this connector to convert from standard AV (Yellow RCA, Composite video) and stereo RCA audio (Red/White Connectors) to SCART INPUT on any device.

Note that this adapter is for SCART INPUT only and have different pin configs than a SCART output adapter.

Based on the image below pin 20 and 17 are used for video (Yellow RCA), and pins 2,4,6 for audio input (Red/White RCA).
SCART Connector diagram

Related keywords : RCA to SCART, SCART to RCA, SCART adapter, SCART input, SCART convert, SCART from composite video, composite SCART Adapter.
Price: R17.00 Manufacturer: HDCabling
Model Number: SCART_Composite_Input_converte Added to Inventory on: Thursday 14 January, 2010

Standard 4-Core Telephone cable (Price per meter)
4-core standard telephone cable used from fax machines, ADSL routers, analogue telephones etc. A RJ11 connector must be crimped onto the ends of the cable as listed at RJ11 Telephone Connector. To securely crimp the connector onto the cable use the crimping tool at RJ45 / RJ11 / RJ12 Crimping Tool.
Price: R1.90 Manufacturer: HDCabling
Model Number: 4_core_cable_meter Added to Inventory on: Sunday 05 August, 2012

Stereo / Dual RCA Coupler - 2 x Female to RCA Female Coupler / Socket
This coupler / socket connects 2 x male RCA plugs, or it can be used as a gender changer male to female.

It is commonly used to extend the cables below depending on the type of usage and cable length required. Note that RCA analog and digital signals attenuate over long distances and is dependant on the equipment signal strength for maximum distance.

- 1.8m 5-RCA Component Video/Audio Coaxial Cable (RG-59/U)

- 7.8 Meter VGA to 3-RCA component video cable (HD15/RGB to 3-RCA)

Related keywords : rca gender changer, rca stereo socket, rca stereo coupler, female rca to rca female, female rca socket, socket rca female, rca change to female, rca to rca, rca extend, longer rca cables, extend rca cables, connect rca cable, rca cable extend

Price: R12.00 Manufacturer: HDCabling
Model Number: Stereo_RCA_Coupler_Socket Added to Inventory on: Saturday 14 March, 2009

Stereo Digital Composite (Yellow) RCA to RF Converter (RCA to Aerial / RF Modulator) - PAL I with channel 21 - 69 selector
This unit converts RCA output (Yellow, Red, White / Composite Video, Left and Right Audio) to Radio Frequency / RF for PAL TV's.

The converter will automatically switch to the A/V input device when powered on and it can be any of the devices below if the device has the 3-RCA (Yellow, White, Red) outputs for video and audio.

● DVD Player
● VCR
● Satellite
● Video Camera
● PC
● CCD Camera
● CCTV Camera
● Cable TV

Features

● Best possible resolution from RF.
● RF Output Level : 70 ± 3.5dB
● RF Output Channels : Channel 21 --> 69
● RF Output Impedance : 75 Ohm
● Video input Impedance : 75 Ohm
● Audio input Impedance : 13 ± 3K ohm
● TV to Antenna Insertion : -2 dB
● Input A : 3 RCA A/V Input (Yellow=Video, Red/White a Stereo audio
● Input B : 75 Ohm Antenna input
● Power : AC 90-240V

You can extend RF to longer distances and also use a SLX such as the ones at 4 Way Powered / Active Compact Aerial / RF Amplifier (SLx) with F-Type Connectors or 2 Way Powered / Active Compact Aerial / RF Amplifier (SLx) with F-Type Connectors or to split the RF signal to multiple rooms for older TV's using an "Aerial" / RF Cable / Older TV Antenna's.

Price: R199.00 Manufacturer: HDCabling
Model Number: RF_Modulator_RCA_to_RF Added to Inventory on: Friday 08 May, 2009

Twist-On F-Type / F-Connector (For use with RG6U cables) - Gold Plated
The F connector is a common means of connecting television signals. It is a type of coaxial RF connector commonly used for "over the air" terrestrial television, cable television and universally for satellite television and cable modems, usually with RG-6/U cable listed at RG6/U cable, 75 Ohm, 64 Braid or, in older installations, with RG-59/U cable.

The F connector is inexpensive, yet has good 75 Ω impedance match up to 1 GHz and has usable bandwidth up to several GHz. One reason for its low cost is that it uses the solid conductor (center wire) of the specified types of coaxial cable as the pin of the male connector. This design is subject to the surface properties of the inner conductor (which must be solid wire) and is not corrosion resistant, hence water proof versions are needed for outside use (for example, on aerials).

The male connector body is typically crimped, or sometimes screwed, onto the exposed outer braid.

To convert an F-Type connector to an RCA male end on both ends of the cable use the connector at Female F-Type to Male RCA Adaptor.

Price: R2.80 Manufacturer: HDCabling
Model Number: F_Type_Gold_Plated_Male Added to Inventory on: Thursday 24 June, 2010

Twist-On FType / F-Connector (For use with RG6U cables) - Nickel Plated
The F connector is a common means of connecting television signals. It is a type of coaxial RF connector commonly used for "over the air" terrestrial television, cable television and universally for satellite television and cable modems, usually with RG-6/U cable listed at RG6/U cable, 75 Ohm, 64 Braid or, in older installations, with RG-59/U cable.

The F connector is inexpensive, yet has good 75 Ω impedance match up to 1 GHz and has usable bandwidth up to several GHz. One reason for its low cost is that it uses the solid conductor (center wire) of the specified types of coaxial cable as the pin of the male connector. This design is subject to the surface properties of the inner conductor (which must be solid wire) and is not corrosion resistant, hence water proof versions are needed for outside use (for example, on aerials).

The male connector body is typically crimped, or sometimes screwed, onto the exposed outer braid.

To convert an F-Type connector to an RCA male end on both ends of the cable use the connector at Female F-Type to Male RCA Adaptor.

Price: R2.20 Manufacturer: HDCabling
Model Number: F_Type_Nickel_Male Added to Inventory on: Thursday 18 March, 2010

Wall Plate Modular Blank Module Insert
HTML Online Editor Sample

This insert can be used on the following wall plates.

4x4 Wall Cover Plate Modular - 2 Holes (White)

or

4x2 Wall Cover Plate Modular - 2 Holes (White)

Price: R6.00 Manufacturer:
Model Number: Wall_Plate_Modular_Blank_inser Added to Inventory on: Tuesday 20 November, 2012

Wall Plate Modular F-Type Barrel Module Insert
HTML Online Editor Sample

This insert can be used on the following wall plates.

4x4 Wall Cover Plate Modular - 2 Holes (White)

or

4x2 Wall Cover Plate Modular - 2 Holes (White)

Price: R19.00 Manufacturer: HDCabling
Model Number: Wall_Plate_Modular_F_Type_Barr Added to Inventory on: Tuesday 20 November, 2012

Wall Plate Modular RCA Female to RCA Female Module Insert
HTML Online Editor Sample

This insert can be used on the following wall plates.

4x4 Wall Cover Plate Modular - 2 Holes (White)

or

4x2 Wall Cover Plate Modular - 2 Holes (White)

Price: R21.00 Manufacturer:
Model Number: Wall_Plate_Modular_RCA_Female_ Added to Inventory on: Tuesday 20 November, 2012

Wall Plate Modular RJ11 Module Insert
This insert can be used on the following wall plates.

4x4 Wall Cover Plate Modular - 2 Holes (White)

or

4x2 Wall Cover Plate Modular - 2 Holes (White)

Price: R18.00 Manufacturer: HDCabling
Model Number: Wall_Plate_Modular_RJ11_insert Added to Inventory on: Tuesday 16 April, 2013

Wall Plate Modular RJ45 LAN Module Insert
HTML Online Editor Sample

This insert can be used on the following wall plates.

4x4 Wall Cover Plate Modular - 2 Holes (White)

or

4x2 Wall Cover Plate Modular - 2 Holes (White)

Price: R22.00 Manufacturer:
Model Number: Wall_Plate_Modular_RJ45_insert Added to Inventory on: Tuesday 20 November, 2012

YPbPr / Component to Composite (Yellow RCA) and S-Video video converter w/Down Scaler
This converter will convert any YPbPr / Component video (Red,Green,Blue output) to composite (Yellow RCA) or Svideo output. See example diagram below. Inputs not limited to these sources and will support other YPbPr / Component sources as well. CVBS = Component / Yellow video output.
YPbPr to Svideo / Component to RCA / Composite converter
Specifications

● Input: 1 Component Video (YPbPr), Audio R/L
● Output: 1 Composite Video (RCA), 1 S-video
● Input component video resolution: 1080P/60, 1080P/50, 1080i/60, 1080i/50, 720P/60, 720P/50, 576P, 480P, 576i and 480i.
● Simultaneously output composite video and s-video.
● With Audio L and Audio R inputs supports headphones or external sound system.
● Output video supports both NTSC and PAL. Switch by button on the box
● Portable size: 11(L) x 7(W) x 2.6(H) cm
● Black piano color
● Power supply: 5V/1A
● Accessories: 1x Power supplier, 1x YPBPR cable (1.5m), 1x single RCA video cable
● (2 m), 1x S-Video cable (1.5 m), 1x 3.5 Audio cable (1.5m), 1x Audio cable (1.5m).

Package Includes

● YpbPr to Composite/S-Video with Audio Converter
● Single RCA cable
● YPbPr cable
● S-Video cable
● 3.5mm Audio cable
● Power Adaptor 5V/1A
● User Manual

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

** NOTE!! - Composite / Yellow RCA / Svideo has a limitation of 480 scanlines / 480i resolution (more or less equal to 640 x 480) which is a limitation by international specification and not a limitation of the converter. The converter will supply the best resolution possible for composite / svideo output.
Related Keywords : ypbpr to composite, ypbpr to rca, ypbpr to svideo, ypbpr to s-video, component to composite, component to rca, component to svideo, component to s-video
Price: R669.00 Manufacturer: HDCabling
Model Number: YPbPr_to_RCA_Composite_Convert Added to Inventory on: Wednesday 14 April, 2010

1.8 Meter Optical Toslink Audio Cable - PVC Fiber plug To PVC Fiber plug
This cable is used for connecting the devices below to an optical / toslink receiver / dolby digital amplifier :

Divx Players
DSTV Decoders
DSTV PVR
DVD players
Blu-Ray Players
CD players
DSS receiver
DAT Machines
DAT player/recorder
MINI Disc player/recorder
Sony Playstation 3
Microsoft XBox 360
or any components that use normal full-size TOSLink connectors.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.

Optical Toslink cables have a maximum length of 15 Meters depending on the source equipment signal quality and strength. It is not recommended to couple more than 2 cables together if you need longer distances with the Fiber Optical Toslink Coupler / Socket - Female to Female

IMPORTANT!!! Before trying to use these cables, you must remove the plastic dust caps. The tips of the connectors should be shinny, metal and gold. If you see a plastic tip, remove it.

Related Keywords : toslink cable, toslink fiber optic cable, fiber cable, digital audio cable, optical cable, , fiber optic cables, toslink fiber optic cables, toslink audio
Price: R49.00 Manufacturer: HDCabling
Model Number: 1.8m_Toslink_Optical_Fiber Added to Inventory on: Monday 26 May, 2008

15.6 Meter Optical Toslink Audio Cable - PVC Fiber plug To PVC Fiber plug
This cable is used for connecting the devices below to an optical / toslink receiver / dolby digital amplifier :

Divx Players
DSTV Decoders
DSTV PVR
DVD players
Blu-Ray Players
CD players
DSS receiver
DAT Machines
DAT player/recorder
MINI Disc player/recorder
Sony Playstation 3
Microsoft XBox 360
or any components that use normal full-size TOSLink connectors.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.

Optical Toslink cables have a maximum length of 15 Meters depending on the source equipment signal quality and strength. It is not recommended to couple more than 2 cables together if you need longer distances with the Fiber Optical Toslink Coupler / Socket - Female to Female

IMPORTANT!!! Before trying to use these cables, you must remove the plastic dust caps. The tips of the connectors should be shinny, metal and gold. If you see a plastic tip, remove it.

Related Keywords : toslink cable, toslink fiber optic cable, fiber cable, digital audio cable, optical cable, , fiber optic cables, toslink fiber optic cables, toslink audio
Price: R229.00 Manufacturer: HDCabling
Model Number: 15.6m_Toslink_Optical_Fiber Added to Inventory on: Wednesday 04 November, 2009

1x2 Digital Optical Toslink Splitter / Selector
This device allows you to connect one toslink optical digital audio source device to two different receiving devices such as a A/V receiver and a television. It will not combine two signals into one.

Toslink cables have a flat side and a round side on the cable. The flat side is regarded as the "top" side and the rounded side as the "bottom" side. Please ensure when inserting the optical cables that the same optical density cables are used e.g OD 5.0mm or 6.0mm and that the "flat" side on the optical cable points towards to top side of the switch. Optical cables click into place when you have a secure connection to ensure the flow of the light signal to pass through correctly. Please ensure that the cable is properly inserted without bending or twisting the cable otherwise you will damage the switch and the optical cable. Push the cables inwards towards the splitter ensuring "flat" side of all cables points to the same side of the splitter until you hear a solid "click". The optical cable plastic mold should be touching the splitter side if the cable is inserted properly and the cable clicks into place. All optical toslink cables on the HDCabling website are 5.0 Optical Density as per cable specifications.

If you need to have two source devices (e.g. XBOX 360 & PS3) to connect into a single optical input on your reciever you can also use this splitter as a auto-switch optical adapter, but only one device (either XBOX 360 or PS3) can be powered on at a time otherwise sound distortion and unexpected results will occur. If both devices will be powered on at the same time then you will need an fiber optical toslink switch. In that case try 3 X 1 Optical Audio Toslink Bi-Directional Manual Switch

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this product and for alternative wiring options.

This splitter must have all cables connected to match. If you notice all optical cables have a flat side (typically top) and grooved side (typically bottom). Make sure the cables on both inputs and outputs are all lined up. If you have a toslink cable upside down, while another cable is right side up, it will not work.

Related Keywords : toslink split, optical splitter, fiber optic splitter, optical toslink splitter, digital audio splitter, toslink cable split
Price: R79.00 Manufacturer: HDCabling
Model Number: 1x2_Toslink_Optical_Splitter Added to Inventory on: Monday 11 August, 2008

2 Meter SC to LC Duplex Multimode 50/125 Fiber Optic Patch Cable - Krone
Krone 2 meter fiber optic patch cable used for fiber optic networks in storage area networks. Dual SC to Dual LC connectors, Duplex Multimode 50/125 Micron type.

50/125 Duplex multimode fiber is most commonly used in Fibre Channel applications. The cable provides higher bandwidth optimized for Gigabit and 10Gbps networks as well.

Technical Specifications

● Constructed with 50/125 micron cable
● Length - 2M
● Use on fiber and fibre channel installations
● SC male to LC male connectors
● Higher bandwidth optimized for gigabit and 10Gbps networks
● Built-in headroom for future applications
● Number of fibers: 2
● Fiber type: all glass graded index
● Core diameter: two 50+/-3 microns
● CLAD diameter: 125+/-2 microns
● Attenuation @850NM: 3.5DB/KM maximum, @1300NM: 1.0DB/KM maximum
● Bandwidth @850NM: 220 MHz-KM minimum, @1300NM: 600 MHz-KM minimum
Fiber Optic 50/125 Micron Duplex Multimode Type.JPG

Price: R139.00 Manufacturer:
Model Number: 2m_fiber_optic_sc_to_lc Added to Inventory on: Sunday 28 June, 2009

3 Meter Optical Toslink Audio Cable - PVC Fiber plug To PVC Fiber plug
This cable is used for connecting the devices below to an optical / toslink receiver / dolby digital amplifier :

Divx Players
DSTV Decoders
DSTV PVR
DVD players
Blu-Ray Players
CD players
DSS receiver
DAT Machines
DAT player/recorder
MINI Disc player/recorder
Sony Playstation 3
Microsoft XBox 360
or any components that use normal full-size TOSLink connectors.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.

Optical Toslink cables have a maximum length of 15 Meters depending on the source equipment signal quality and strength. It is not recommended to couple more than 2 cables together if you need longer distances with the Fiber Optical Toslink Coupler / Socket - Female to Female

IMPORTANT!!! Before trying to use these cables, you must remove the plastic dust caps. The tips of the connectors should be shinny, metal and gold. If you see a plastic tip, remove it.

Related Keywords : toslink cable, toslink fiber optic cable, fiber cable, digital audio cable, optical cable, , fiber optic cables, toslink fiber optic cables, toslink audio
Price: R69.00 Manufacturer: HDCabling
Model Number: 3m_Toslink_Optical_Fiber Added to Inventory on: Tuesday 30 November, 2010

3x1 Optical Toslink Audio Bi-Directional Manual Switch
This switch enables you to connect 3 Optical Toslink input devices to one output device or vice versa.

Toslink cables have a flat side and a round side on the cable. The flat side is regarded as the "top" side and the rounded side as the "bottom" side. Please ensure when inserting the optical cables that the same optical density cables are used e.g OD 5.0mm or 6.0mm and that the "flat" side on the optical cable points towards to top side of the switch. Optical cables click into place when you have a secure connection to ensure the flow of the light signal to pass through correctly. Please ensure that the cable is properly inserted without bending or twisting the cable otherwise you will damage the switch and the optical cable. Push the cables inwards towards the switch ensuring "flat" side of all optical cables point to the top side of the switch until you hear a solid "click". The optical cable plastic mold should be touching the switch side if the cable is inserted properly and the cable clicks into place. All optical toslink cables on the HDCabling website are 5.0 Optical Density as per cable specifications.

There are 1-in and 3-out Signal Jack or vice versa.

The switch works Bi-Directionally.

Dimensions : 140mm(L) x 110mm (W) x 30mm(H)

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.

Related Keywords : audio cable connectors, toslink switch, fiber optical switch, toslink audio switch, digital switch, fiber optic switch, optical splitter, fiber optic splitter, toslink splitter
Price: R179.00 Manufacturer: HDCabling
Model Number: 3x1_Toslink_Optical_Fiber Added to Inventory on: Monday 09 June, 2008

7.8 Meter Optical Toslink Audio Cable - PVC Fiber plug To PVC Fiber plug
This cable is used for connecting the devices below to an optical / toslink receiver / dolby digital amplifier :

Divx Players
DSTV Decoders
DSTV PVR
DVD players
Blu-Ray Players
CD players
DSS receiver
DAT Machines
DAT player/recorder
MINI Disc player/recorder
Sony Playstation 3
Microsoft XBox 360
or any components that use normal full-size TOSLink connectors.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.

Optical Toslink cables have a maximum length of 15 Meters depending on the source equipment signal quality and strength. It is not recommended to couple more than 2 cables together if you need longer distances with the Fiber Optical Toslink Coupler / Socket - Female to Female

IMPORTANT!!! Before trying to use these cables, you must remove the plastic dust caps. The tips of the connectors should be shinny, metal and gold. If you see a plastic tip, remove it.

Related Keywords : toslink cable, toslink fiber optic cable, fiber cable, digital audio cable, optical cable, , fiber optic cables, toslink fiber optic cables, toslink audio
Price: R129.00 Manufacturer: HDCabling
Model Number: 7.8m_Toslink_Optical_Fiber Added to Inventory on: Wednesday 04 November, 2009

Fiber Optical Toslink Coupler / Socket - Female to Female
Fiber Optical Coupler for connecting the two male ends of two Toslink Optical Cables to have a longer cable.

Please note that Optical cables have a specified maximum length of 15 meters with 5.0mm cables. We have tested this coupler with our 10 meter Optical Toslink Audio Cable and 4.5 meter Optical Toslink Audio Cable for a total of 14.5 meter and the signal on Dolby Digital 2.0 / 5.1 / 7.1 and DTS Audio are 100%.

It is not recommend to extend / couple more than 2 individual cables beyond the maximum length of 15 meters.

Related Keywords : optical link, optical extend, optical socket, toslink connect, optical female coupler, extend toslink cable, fiber optical female socket, toslink extend, toslink link, female optical adapter
Price: R19.00 Manufacturer: HDCabling
Model Number: Optical_Coupler_Socket_Extend Added to Inventory on: Wednesday 20 August, 2008

Optical Toslink Female to Toslink Mini Male Adapter - Macbook Pro Audio
Use this converter to convert mini-Toslink to Fiber Optical Toslink used on some mobile digital audio devices & PC Sound cards.

Common Uses :

- Sound Blaster X-Fi XtremeGamer (Plugs into Flexijack)
- Apple computers - Macbook Pro
- Portable MiniDisc players

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this product and for alternative wiring options.

Optical Toslink cables have a maximum length of 15 Meters depending on the source equipment signal quality and strength. If you need to extend Fiber Optical Toslink cables use a maximum of 2 cables together with the Fiber Optical Toslink Coupler / Socket - Female to Female

Related Keywords : toslink convert, toslink mini, optical toslink to mini toslink, mini toslink to toslink
Price: R19.00 Manufacturer: HDCabling
Model Number: mini_Toslink_Optical_Converter Added to Inventory on: Tuesday 10 June, 2008

Toslink Optical to Digital Coaxial (RCA) Converter
You can plug your Toslink Digital Optical in and get Digital Audio Coax Out.

This converter transforms a Toslink Optical Digital Audio signal to an RCA Coaxial (S/PDIF) Digital Audio signal.
This converter will allow you to connect the Toslink optical output from your DVD, cable or satellite receiver to a coaxial digital audio input.
This item is for digital signals only. Make sure your devices say digital in or out. This item will not convert digital toslink to analog mono RCA.

- Optical Digital Input via Toslink
- Coaxial Digital Output via RCA jack

Simple installation - connect your cables to the converter and to your devices.

Dimensions: 2 13/16" x 1 7/8"

Note: This item ships with a dust cap over the toslink connector. This dust cap must be removed before use. Just pull it straight out. Related Keywords : optical to coaxial convert, optical to rca converter, optical to digital convert, optical to spdif converter, toslink to rca converter, toslink to coaxial converter, toslink to digital convert, toslink to spdif converter, fiber to rca converter, fiber to coaxial converter, fiber to digital converter, fiber to spdif convert.
Price: R249.00 Manufacturer: HDCabling
Model Number: Optical_Toslink_Digital_RCA_Co Added to Inventory on: Monday 16 February, 2009

0.3 Meter / 300mm HDMI to HDMI v1.4 Cable (HDMI Patch Lead, Shortest Length available) - Gold Plated, High Speed & 3D
HDMI v1.4 cables are backwards compatible with all HDMI v1.0, v1.1, v1.2 and v1.3 devices and features the new specifications included with HDMI v1.4. For more information with regards to the HDMI v1.4 spec please see the full details at HDMI v1.4 Specifications. Actual image on the right might be different since cable molds change frequently. Cable molds still remain black PVC, Gold Plated with the HDMI v1.4 specifications below.

Tested 100% with all common HDMI sources such as Multichoice HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

This CABLE is For:

- Any Device with an HDMI Interface (Backwards Compatible to HDMI V1.0)
- To Connect any BLU-RAY / HD DVD / Multichoice HDPVR to a display or Digital Receiver to provide Audio / Video travelling via the same cable for HD Video/Audio
- Connect your XBOX 360 / PS3 Gaming Console to a display / digital receiver with a HDMI interface (Provides > 1080p resolutions, specs below)
- To connect current DVD players with a HDMI interface to a display / digital receiver to allow upscaling of normal DVD resolution to 1080p

New HDMI v1.4 features

● HDMI Ethernet Channel
● Audio Return Channel
● 3D (For PC's rendering 2 x 1080p images to produce a 3D Effect)
● 4K Resolution Support - 4096 x 2160 pixels
● Content Type
● Additional Color Spaces

HDMI Ethernet Channel technology consolidates video, audio, and data streams into a single HDMI cable, combining the umatched signal quality and convenience of HDMI connectivity with the power and flexibility of home entertainment networking. It incorporates a dedicated data channel into the HDMI link, enabling high-speed, bi-directional networking at up to 100 Mb/sec.
HDMI v1.4 before and after Ethernet Channel

Specifications & Features

Connector Type: HDMI male to HDMI male
Connector: Oxygen Free Copper
Connector Finish: Gold, Superior Signal transfer
Gauge: 28AWG
# of conductors: 19
Shielding level: Triple
Shielding type: EMI
Supported Resolutions: Up to 4K resolutions (Exceeds 1080p resolution by more than 2x), 4096 pixels wide by 2160 pixels high.
HDMI Certified: Yes
HDMI Spec: v1.4
HDCP Compliant: Yes
CEC Compliant: Yes
ROHS Compliant: Yes
1.3 Device Compatible: Yes
Supports DVD Audio: Yes
Supports SACD: Yes
Supports TrueHD & DTS-HD: Yes
Overall Diameter: 7mm

UL Specs

CL2 (In-Wall): No
Voltage Rating: 30V
Temperature Rating: 80° C

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. To extend HDMI cables use the HDMI Coupler / Socket - Female to Female (Gold Plated Connectors)

Some sources / players do not produce an equalized HDMI signal and for coupling or extending HDMI Cable lengths beyond 15 meters we recommend that a HDMI Active Equalizer Extender / Repeater be used rather than a HDMI Coupler.

For lengths exceeding 25 meters and with conduit cable space restrictions we recommend either of the following products HDMI Extender CAT-5e / CAT-6 w/Tx + Rx (30m 1080p) or HDMI Super Extender CAT6 w/Tx + Rx (50m-60m 1080p)

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON.

Please check the HDMI Standards & Specifications section on our website to check what the different versions in HDMI offers regarding picture, sound quality, resolution, colour quality etc.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.

Related keywords : audio video cable, hdmi cable for lcd, dvi to hdmi, 1 meter hdmi cables, cheap hdmi cables, hdmi leads, hdmi analog, 1 meter hdmi cable, cable dvd hdmi, hdmi cable for hdtv, 1 meter cable, audio video cables, hdmi dvi cable, premium hdmi cable
Price: R45.00 Manufacturer: HDCabling
Model Number: 300mm_HDMI_v1.4_Cable Added to Inventory on: Sunday 08 July, 2012

0.5 Meter / 500mm HDMI to HDMI v1.4 Cable - Gold Plated, High Speed & 3D
HDMI v1.4 cables are backwards compatible with all HDMI v1.0, v1.1, v1.2 and v1.3 devices and features the new specifications included with HDMI v1.4. For more information with regards to the HDMI v1.4 spec please see the full details at HDMI v1.4 Specifications. Actual image on the right might be different since cable molds change frequently. Cable molds still remain black PVC, Gold Plated with the HDMI v1.4 specifications below.

Tested 100% with all common HDMI sources such as Multichoice HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

This CABLE is For:

- Any Device with an HDMI Interface (Backwards Compatible to HDMI V1.0)
- To Connect any BLU-RAY / HD DVD / Multichoice HDPVR to a display or Digital Receiver to provide Audio / Video travelling via the same cable for HD Video/Audio
- Connect your XBOX 360 / PS3 Gaming Console to a display / digital receiver with a HDMI interface (Provides > 1080p resolutions, specs below)
- To connect current DVD players with a HDMI interface to a display / digital receiver to allow upscaling of normal DVD resolution to 1080p

New HDMI v1.4 features

● HDMI Ethernet Channel
● Audio Return Channel
● 3D (For PC's rendering 2 x 1080p images to produce a 3D Effect)
● 4K Resolution Support - 4096 x 2160 pixels
● Content Type
● Additional Color Spaces

HDMI Ethernet Channel technology consolidates video, audio, and data streams into a single HDMI cable, combining the umatched signal quality and convenience of HDMI connectivity with the power and flexibility of home entertainment networking. It incorporates a dedicated data channel into the HDMI link, enabling high-speed, bi-directional networking at up to 100 Mb/sec.
HDMI v1.4 before and after Ethernet Channel

Specifications & Features

Connector Type: HDMI male to HDMI male
Connector: Oxygen Free Copper
Connector Finish: Gold, Superior Signal transfer
Gauge: 28AWG
# of conductors: 19
Shielding level: Triple
Shielding type: EMI
Supported Resolutions: Up to 4K resolutions (Exceeds 1080p resolution by more than 2x), 4096 pixels wide by 2160 pixels high.
HDMI Certified: Yes
HDMI Spec: v1.4
HDCP Compliant: Yes
CEC Compliant: Yes
ROHS Compliant: Yes
1.3 Device Compatible: Yes
Supports DVD Audio: Yes
Supports SACD: Yes
Supports TrueHD & DTS-HD: Yes
Overall Diameter: 7mm

UL Specs

CL2 (In-Wall): No
Voltage Rating: 30V
Temperature Rating: 80° C

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. To extend HDMI cables use the HDMI Coupler / Socket - Female to Female (Gold Plated Connectors)

Some sources / players do not produce an equalized HDMI signal and for coupling or extending HDMI Cable lengths beyond 15 meters we recommend that a HDMI Active Equalizer Extender / Repeater be used rather than a HDMI Coupler.

For lengths exceeding 25 meters and with conduit cable space restrictions we recommend either of the following products HDMI Extender CAT-5e / CAT-6 w/Tx + Rx (30m 1080p) or HDMI Super Extender CAT6 w/Tx + Rx (50m-60m 1080p)

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON.

Please check the HDMI Standards & Specifications section on our website to check what the different versions in HDMI offers regarding picture, sound quality, resolution, colour quality etc.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.

Related keywords : audio video cable, hdmi cable for lcd, dvi to hdmi, 1 meter hdmi cables, cheap hdmi cables, hdmi leads, hdmi analog, 1 meter hdmi cable, cable dvd hdmi, hdmi cable for hdtv, 1 meter cable, audio video cables, hdmi dvi cable, premium hdmi cable
Price: R49.00 Manufacturer: HDCabling
Model Number: 500mm_HDMI_v1.4_Cable Added to Inventory on: Thursday 03 February, 2011

1 Meter HDMI to HDMI v1.4 Cable - Gold Plated, High Speed, Supports up to 4K resolutions, 3D, Ethernet Channel
HDMI v1.4 cables are backwards compatible with all HDMI v1.0, v1.1, v1.2 and v1.3 devices and features the new specifications included with HDMI v1.4. For more information with regards to the HDMI v1.4 spec please see the full details at HDMI v1.4 Specifications. Actual image on the right might be different since cable molds change frequently. Cable molds still remain black PVC, Gold Plated with the HDMI v1.4 specifications below.

Tested 100% with all common HDMI sources such as Multichoice HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

This CABLE is For:

- Any Device with an HDMI Interface (Backwards Compatible to HDMI V1.0)
- To Connect any BLU-RAY / HD DVD / Multichoice HDPVR to a display or Digital Receiver to provide Audio / Video travelling via the same cable for HD Video/Audio
- Connect your XBOX 360 / PS3 Gaming Console to a display / digital receiver with a HDMI interface (Provides > 1080p resolutions, specs below)
- To connect current DVD players with a HDMI interface to a display / digital receiver to allow upscaling of normal DVD resolution to 1080p

New HDMI v1.4 features

● HDMI Ethernet Channel
● Audio Return Channel
● 3D (For PC's rendering 2 x 1080p images to produce a 3D Effect)
● 4K Resolution Support - 4096 x 2160 pixels
● Content Type
● Additional Color Spaces

HDMI Ethernet Channel technology consolidates video, audio, and data streams into a single HDMI cable, combining the umatched signal quality and convenience of HDMI connectivity with the power and flexibility of home entertainment networking. It incorporates a dedicated data channel into the HDMI link, enabling high-speed, bi-directional networking at up to 100 Mb/sec.
HDMI v1.4 before and after Ethernet Channel

Specifications & Features

Connector Type: HDMI male to HDMI male
Connector: Oxygen Free Copper
Connector Finish: Gold, Superior Signal transfer
Gauge: 28AWG
# of conductors: 19
Shielding level: Triple
Shielding type: EMI
Supported Resolutions: Up to 4K resolutions (Exceeds 1080p resolution by more than 2x), 4096 pixels wide by 2160 pixels high.
HDMI Certified: Yes
HDMI Spec: v1.4
HDCP Compliant: Yes
CEC Compliant: Yes
ROHS Compliant: Yes
1.3 Device Compatible: Yes
Supports DVD Audio: Yes
Supports SACD: Yes
Supports TrueHD & DTS-HD: Yes
Overall Diameter: 7mm

UL Specs

CL2 (In-Wall): No
Voltage Rating: 30V
Temperature Rating: 80° C

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. To extend HDMI cables use the HDMI Coupler / Socket - Female to Female (Gold Plated Connectors)

Some sources / players do not produce an equalized HDMI signal and for coupling or extending HDMI Cable lengths beyond 15 meters we recommend that a HDMI Active Equalizer Extender / Repeater be used rather than a HDMI Coupler.

For lengths exceeding 25 meters and with conduit cable space restrictions we recommend either of the following products HDMI Extender CAT-5e / CAT-6 w/Tx + Rx (30m 1080p) or HDMI Super Extender CAT6 w/Tx + Rx (50m-60m 1080p)

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON.

Please check the HDMI Standards & Specifications section on our website to check what the different versions in HDMI offers regarding picture, sound quality, resolution, colour quality etc.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.

Related keywords : audio video cable, hdmi cable for lcd, dvi to hdmi, 1 meter hdmi cables, cheap hdmi cables, hdmi leads, hdmi analog, 1 meter hdmi cable, cable dvd hdmi, hdmi cable for hdtv, 1 meter cable, audio video cables, hdmi dvi cable, premium hdmi cable
Price: R59.00 Manufacturer: HDCabling
Model Number: 1m_HDMI_v1.4_Cable Added to Inventory on: Friday 29 January, 2010

1 Meter Premium HDMI to HDMI v1.4 Cable - Braiding, Gold Plated, Metal Heads, High Speed, Supports up to 4K resolutions, 3D, Ethernet Channel
HDMI v1.4 cables are backwards compatible with all HDMI v1.0, v1.1, v1.2 and v1.3 devices and features the new specifications included with HDMI v1.4. For more information with regards to the HDMI v1.4 spec please see the full details at HDMI v1.4 Specifications. Actual image on the right might be different since cable molds change frequently. Cable molds still remain black PVC, Gold Plated with the HDMI v1.4 specifications below.

Tested 100% with all common HDMI sources such as Multichoice HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

This CABLE is For:

- Any Device with an HDMI Interface (Backwards Compatible to HDMI V1.0)
- To Connect any BLU-RAY / HD DVD / Multichoice HDPVR to a display or Digital Receiver to provide Audio / Video travelling via the same cable for HD Video/Audio
- Connect your XBOX 360 / PS3 Gaming Console to a display / digital receiver with a HDMI interface (Provides > 1080p resolutions, specs below)
- To connect current DVD players with a HDMI interface to a display / digital receiver to allow upscaling of normal DVD resolution to 1080p

New HDMI v1.4 features

● HDMI Ethernet Channel
● Audio Return Channel
● 3D (For PC's rendering 2 x 1080p images to produce a 3D Effect)
● 4K Resolution Support - 4096 x 2160 pixels
● Content Type
● Additional Color Spaces

HDMI Ethernet Channel technology consolidates video, audio, and data streams into a single HDMI cable, combining the umatched signal quality and convenience of HDMI connectivity with the power and flexibility of home entertainment networking. It incorporates a dedicated data channel into the HDMI link, enabling high-speed, bi-directional networking at up to 100 Mb/sec.
HDMI v1.4 before and after Ethernet Channel

Specifications & Features

Connector Type: HDMI male to HDMI male
Connector: Oxygen Free Copper
Connector Finish: Gold, Superior Signal transfer
Gauge: 28AWG
# of conductors: 19
Shielding level: Triple
Shielding type: EMI
Supported Resolutions: Up to 4K resolutions (Exceeds 1080p resolution by more than 2x), 4096 pixels wide by 2160 pixels high.
HDMI Certified: Yes
HDMI Spec: v1.4
HDCP Compliant: Yes
CEC Compliant: Yes
ROHS Compliant: Yes
1.3 Device Compatible: Yes
Supports DVD Audio: Yes
Supports SACD: Yes
Supports TrueHD & DTS-HD: Yes
Overall Diameter: 7mm

UL Specs

CL2 (In-Wall): No
Voltage Rating: 30V
Temperature Rating: 80° C

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. To extend HDMI cables use the HDMI Coupler / Socket - Female to Female (Gold Plated Connectors)

Some sources / players do not produce an equalized HDMI signal and for coupling or extending HDMI Cable lengths beyond 15 meters we recommend that a HDMI Active Equalizer Extender / Repeater be used rather than a HDMI Coupler.

For lengths exceeding 25 meters and with conduit cable space restrictions we recommend either of the following products HDMI Extender CAT-5e / CAT-6 w/Tx + Rx (30m 1080p) or HDMI Super Extender CAT6 w/Tx + Rx (50m-60m 1080p)

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON.

Please check the HDMI Standards & Specifications section on our website to check what the different versions in HDMI offers regarding picture, sound quality, resolution, colour quality etc.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.

Related keywords : audio video cable, hdmi cable for lcd, dvi to hdmi, 1 meter hdmi cables, cheap hdmi cables, hdmi leads, hdmi analog, 1 meter hdmi cable, cable dvd hdmi, hdmi cable for hdtv, 1 meter cable, audio video cables, hdmi dvi cable, premium hdmi cable
Price: R79.00 Manufacturer: HDCabling
Model Number: Premium_1m_HDMI_v1.4_Cable Added to Inventory on: Thursday 24 June, 2010

1.5 Meter HDMI to HDMI Cable v1.4 - Gold Plated, High Speed, Supports up to 4K resolutions, 3D, Ethernet Channel
HDMI v1.4 cables are backwards compatible with all HDMI v1.0, v1.1, v1.2 and v1.3 devices and features the new specifications included with HDMI v1.4. For more information with regards to the HDMI v1.4 spec please see the full details at HDMI v1.4 Specifications. Actual image on the right might be different since cable molds change frequently. Cable molds still remain black PVC, Gold Plated with the HDMI v1.4 specifications below.

Tested 100% with all common HDMI sources such as Multichoice HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

This CABLE is For:

- Any Device with an HDMI Interface (Backwards Compatible to HDMI V1.0)
- To Connect any BLU-RAY / HD DVD / Multichoice HDPVR to a display or Digital Receiver to provide Audio / Video travelling via the same cable for HD Video/Audio
- Connect your XBOX 360 / PS3 Gaming Console to a display / digital receiver with a HDMI interface (Provides > 1080p resolutions, specs below)
- To connect current DVD players with a HDMI interface to a display / digital receiver to allow upscaling of normal DVD resolution to 1080p

New HDMI v1.4 features

● HDMI Ethernet Channel
● Audio Return Channel
● 3D (For PC's rendering 2 x 1080p images to produce a 3D Effect)
● 4K Resolution Support - 4096 x 2160 pixels
● Content Type
● Additional Color Spaces

HDMI Ethernet Channel technology consolidates video, audio, and data streams into a single HDMI cable, combining the umatched signal quality and convenience of HDMI connectivity with the power and flexibility of home entertainment networking. It incorporates a dedicated data channel into the HDMI link, enabling high-speed, bi-directional networking at up to 100 Mb/sec.
HDMI v1.4 before and after Ethernet Channel

Specifications & Features

Connector Type: HDMI male to HDMI male
Connector: Oxygen Free Copper
Connector Finish: Gold, Superior Signal transfer
Gauge: 28AWG
# of conductors: 19
Shielding level: Triple
Shielding type: EMI
Supported Resolutions: Up to 4K resolutions (Exceeds 1080p resolution by more than 2x), 4096 pixels wide by 2160 pixels high.
HDMI Certified: Yes
HDMI Spec: v1.4
HDCP Compliant: Yes
CEC Compliant: Yes
ROHS Compliant: Yes
1.3 Device Compatible: Yes
Supports DVD Audio: Yes
Supports SACD: Yes
Supports TrueHD & DTS-HD: Yes
Overall Diameter: 7mm

UL Specs

CL2 (In-Wall): No
Voltage Rating: 30V
Temperature Rating: 80° C

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. To extend HDMI cables use the HDMI Coupler / Socket - Female to Female (Gold Plated Connectors)

Some sources / players do not produce an equalized HDMI signal and for coupling or extending HDMI Cable lengths beyond 15 meters we recommend that a HDMI Active Equalizer Extender / Repeater be used rather than a HDMI Coupler.

For lengths exceeding 25 meters and with conduit cable space restrictions we recommend either of the following products HDMI Extender CAT-5e / CAT-6 w/Tx + Rx (30m 1080p) or HDMI Super Extender CAT6 w/Tx + Rx (50m-60m 1080p)

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON.

Please check the HDMI Standards & Specifications section on our website to check what the different versions in HDMI offers regarding picture, sound quality, resolution, colour quality etc.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.

Related keywords : audio video cable, hdmi cable for lcd, dvi to hdmi, 1 meter hdmi cables, cheap hdmi cables, hdmi leads, hdmi analog, 1 meter hdmi cable, cable dvd hdmi, hdmi cable for hdtv, 1 meter cable, audio video cables, hdmi dvi cable, premium hdmi cable
Price: R69.00 Manufacturer: HDCabling
Model Number: 1.5m_HDMI_v1.4_Cable Added to Inventory on: Thursday 04 February, 2010

1.5 Meter Male DVI-D to DVI-D Male Dual Link Cable (Digital Cable only DVI-D)
Digital Visual Interface (DVI) is the standard interface for a high-performance connection between PCs and flat panel displays, digital CRT displays, projectors, and HDTV. The DVI-D Digital Cable delivers the high-performance, high-bandwidth interface needed for video displays of today while leaving headroom for the products of tomorrow.

These precision-engineered cables are fully compliant with the DVI standard defined by DDWG (Digital Display Working Group). The DVI-D dual link configuration provides enough bandwidth for resolutions up to 2560x1600 and allows high speed digital transmission up to 7.4 Gbps.

DVI does not carry audio and if this cable is used in conjunction with a HDMI cable audio will not be transmitted.

Specs & Features

Connector Type: DVI-D male to DVI-D male
Signal Type: Digital
Length: 2 Meter
Gauge: 28AWG
Pin Configuration: 24 + 1
Conductor Plating: None
Shielding level: Triple
Shielding type: EMI
1080p support: Yes
Bandwidth: Dual Link
Maximum Resolution: 2560x1600
Min Clock Freq: 21.76 Mhz
Max Clock Freq: 165 Mhz x 2
Max Thoroughput: 7.4 Gbps
Pixels per cycle 2:
Bits per Pixel 24:
DDWG Compliant: Yes
HDCP Compliant: Yes
ROHS Compliant Yes
UL Certified Yes
CL2 (In-Wall): No
VW-1: Yes
Voltage Rating: 30V
Temperature Rating: 80° C

*Due to continual efforts to make improvements to our products, all information is subject to change without notice. Items you receive may be different than described.
Price: R85.00 Manufacturer: HDCabling
Model Number: DVI_D_to_DVI_D_Dual_Link Added to Inventory on: Tuesday 07 July, 2009

1.5 Meter MINI-HDMI (Type C) to Standard HDMI (Type A) Cable v1.3a (Gold Plated Connectors)
This cable will allow you to connect your portable device / HD Video Cameras with a mini-HDMI connector (Type C) to the standard HDMI connector (type A) found on most televisions / LCD's / Plasmas and A/V recievers.

Specifications & Features

Connector Type: HDMI male to HDMI male
Connector Finish: Gold
Gauge: 30AWG
# of conductors: 19
Supported Resolutions: 480i to > 1080p
HDMI Certified: Yes
HDMI Spec: 1.3
HDCP Compliant: Yes
CEC Compliant: Yes
ROHS Compliant: Yes

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. This item conforms to the HDMI v1.3 specifications described in the section. In general for Blu-ray HDMI v1.0 is required as a minimum and for PS3 / Xbox 360 HDMI v1.2 is recommended as a minimum. HDMI v1.3 exceeds both HDMI v1.0 and v1.2 specifications.

HDMI Mini (type C) connectors are the new (from Nov 2007) high definition standard for connecting HDMI equipped portable devices such as high definition camcorders / Video Cameras.

Please check the HDMI Standards & Specifications section on our website to check what the different versions in HDMI offers regarding picture, sound quality, resolution, colour quality etc.

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON. The sequence below should be followed when installing new cables or equipment between source/player and LCD / Plasma.

1.) Power-off all equipment (At the wall socket).
2.) Connect all Cables, Splitters, Switches, Extenders within HDMI Distribution Network.
3.) Power on all Splitters, Switches, Extenders within HDMI Distribution Network.
4.) Power on all LCD / Plasma's and set to HDMI input from HDMI Distribution Network.
5.) Power on Sources / Players (Sources negotiates HDCP Handshake via HDMI Network to displays which is set to HDMI input to respond to handshake).

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.



Related keywords : mini-hdmi, hdmi to mini hdmi, mini hdmi cable, mini hdmi to hdmi, mini hdmi video camera
Price: R59.00 Manufacturer: HDCabling
Model Number: 1.5m_minHDMI_Cab Added to Inventory on: Wednesday 21 April, 2010

1.8 Meter HDMI to DVI-D Dual Link Cable - (Gold Plated Connectors)
DVI-D Dual link cables are much higher rated on bandwidth (up to 2560 x 1600 resolution / 1600p) compared to single link which is only rated up to 1920x1200 resolutions.

This cable is mostly used for connecting your Xbox 360, Playstation 3, DSTV HDPVR, Blu-ray player to a display with only DVI-D input and no HDMI inputs. Audio will travel via coaxial / optical since HDMI to DVI only carries video. Smaller computer LCD Screens are much cheaper compared to LCD TV's and offers much higher resolutions than normal televisions.

Plug cable from Output HDMI Female on HDMI Device to Input Female DVI-D on display.

The cable is bi-directional and can also by used to connect your PC Graphics Card (DVI Output) to the HDMI Port on your HDMI display. The graphics card output needs to support DVI-D digital signals. Most Nvidia and ATI graphics cards support DVI-I which can autoswitch between DVI-D (Digital) and DVI-A (Analog). To explain the differences in the variations of DVI connectors see the diagram below

Specifications & Features

Connector Type: HDMI male to DVI-D male
Connector Finish: Gold
Gauge: 28AWG
# of conductors: 24 + 1 solidary flat blade
Conductor Plating: None
Shielding level: Triple
Shielding type: EMI
Ferrite Cores: Yes
Supported Resolutions: 480i to > 1080p (up to 2560 x 1600)
Bandwidth: Dual Link
HDMI Certified: Yes
HDCP Compliant: Yes
CEC Compliant: Yes
ROHS Compliant Yes
UL Certified Yes
1.3 Device Compatible: Yes

UL Specs

CL2 (In-Wall): No
VW-1: Yes
Voltage Rating: 30V
Temperature Rating: 80° C

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. To extend a HDMI to DVI cable use the HDMI Coupler / Socket - Female to Female (Gold Plated Connectors) and another HDMI Cable of the required length.

DVI-D Dual Link indication

Some sources / players do not produce an equalized HDMI signal and for coupling or extending HDMI Cable lengths beyond 10 meters we recommend that a HDMI Active Equalizer Extender / Repeater be used rather than a HDMI Coupler.

For lengths exceeding 30 meters we recommend either of the following products HDMI Extender CAT-5e / CAT-6 w/Tx + Rx (30m 1080p) or HDMI Super Extender CAT6 w/Tx + Rx (50m-60m 1080p)

HDMI has become the new standard in Home Entertainment and Digital Audio & Video.

When using a HDCP Player / Source Device with these cables please ensure that your display is HDCP certified otherwise the source device will have issues regarding the HDCP Protocol. This cable transmits video only from HDMI to DVI and the audio needs to be on a separate cable such as optical, coaxial RCA, analog etc.

Please check the HDMI Standards & Specifications section on our website to check what the different versions in HDMI offers regarding picture, sound quality, resolution, colour quality etc.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.

High-Definition Multimedia Interface (HDMI) is the first industry-supported, UNCOMPRESSED audio/video interface. This cable connect DVI devices to HDMI devices for DVD, satellite boxes, LCD, projectors, plasma and HDTVs. HDMI provides an interface between any HDMI-enabled audio/video source, such as a set-top box, DVD player, and A/V receiver and an audio and/or video monitor or projector.

HDMI supports standard, enhanced, or high-definition video. It transmits all ATSC HDTV standards with bandwidth to spare to accommodate future enhancements and requirements.



Related keywords : audio video cable, hdmi cable for lcd, dvi to hdmi, 6ft hdmi cables, cheap hdmi cables, hdmi leads, hdmi analog, 6ft 2 meter hdmi cable, 2 meter cable dvd hdmi, hdmi cable for hdtv, 6 feet cable, 2 meter cable, audio video cables, hdmi dvi cable, premium hdmi cable
Price: R89.00 Manufacturer: HDCabling
Model Number: DVI_to_HDMI_Cable_Dual_Link Added to Inventory on: Monday 26 May, 2008

1.8 Meter HDMI to HDMI v1.4 Cable - Gold Plated, High Speed, Supports up to 4K resolutions, 3D, Ethernet Channel
HDMI v1.4 cables are backwards compatible with all HDMI v1.0, v1.1, v1.2 and v1.3 devices and features the new specifications included with HDMI v1.4. For more information with regards to the HDMI v1.4 spec please see the full details at HDMI v1.4 Specifications. Actual image on the right might be different since cable molds change frequently. Cable molds still remain black PVC, Gold Plated with the HDMI v1.4 specifications below.

Tested 100% with all common HDMI sources such as Multichoice HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

This CABLE is For:

- Any Device with an HDMI Interface (Backwards Compatible to HDMI V1.0)
- To Connect any BLU-RAY / HD DVD / Multichoice HDPVR to a display or Digital Receiver to provide Audio / Video travelling via the same cable for HD Video/Audio
- Connect your XBOX 360 / PS3 Gaming Console to a display / digital receiver with a HDMI interface (Provides > 1080p resolutions, specs below)
- To connect current DVD players with a HDMI interface to a display / digital receiver to allow upscaling of normal DVD resolution to 1080p

New HDMI v1.4 features

● HDMI Ethernet Channel
● Audio Return Channel
● 3D (For PC's rendering 2 x 1080p images to produce a 3D Effect)
● 4K Resolution Support - 4096 x 2160 pixels
● Content Type
● Additional Color Spaces

HDMI Ethernet Channel technology consolidates video, audio, and data streams into a single HDMI cable, combining the umatched signal quality and convenience of HDMI connectivity with the power and flexibility of home entertainment networking. It incorporates a dedicated data channel into the HDMI link, enabling high-speed, bi-directional networking at up to 100 Mb/sec.
HDMI v1.4 before and after Ethernet Channel

Specifications & Features

Connector Type: HDMI male to HDMI male
Connector: Oxygen Free Copper
Connector Finish: Gold, Superior Signal transfer
Gauge: 28AWG
# of conductors: 19
Shielding level: Triple
Shielding type: EMI
Supported Resolutions: Up to 4K resolutions (Exceeds 1080p resolution by more than 2x), 4096 pixels wide by 2160 pixels high.
HDMI Certified: Yes
HDMI Spec: v1.4
HDCP Compliant: Yes
CEC Compliant: Yes
ROHS Compliant: Yes
1.3 Device Compatible: Yes
Supports DVD Audio: Yes
Supports SACD: Yes
Supports TrueHD & DTS-HD: Yes
Overall Diameter: 7mm

UL Specs

CL2 (In-Wall): No
Voltage Rating: 30V
Temperature Rating: 80° C

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. To extend HDMI cables use the HDMI Coupler / Socket - Female to Female (Gold Plated Connectors)

Some sources / players do not produce an equalized HDMI signal and for coupling or extending HDMI Cable lengths beyond 15 meters we recommend that a HDMI Active Equalizer Extender / Repeater be used rather than a HDMI Coupler.

For lengths exceeding 25 meters and with conduit cable space restrictions we recommend either of the following products HDMI Extender CAT-5e / CAT-6 w/Tx + Rx (30m 1080p) or HDMI Super Extender CAT6 w/Tx + Rx (50m-60m 1080p)

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON.

Please check the HDMI Standards & Specifications section on our website to check what the different versions in HDMI offers regarding picture, sound quality, resolution, colour quality etc.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.

Related keywords : audio video cable, hdmi cable for lcd, dvi to hdmi, 1 meter hdmi cables, cheap hdmi cables, hdmi leads, hdmi analog, 1 meter hdmi cable, cable dvd hdmi, hdmi cable for hdtv, 1 meter cable, audio video cables, hdmi dvi cable, premium hdmi cable
Price: R75.00 Manufacturer: HDCabling
Model Number: 1.8m_HDMI_v1.4_Cable Added to Inventory on: Thursday 04 February, 2010

1.8 Meter Male mini Displayport (Thunderbolt) to Standard Displayport Male Cable - Black
Our Mini Displayport to Displayport cable is the perfect solution for hooking up your new generation (from 2009) Macbook, Macbook Pro, Macbook Air or ATI Graphics card with mini-DP port to a display that has Displayport input. The cable also functions bi-directional and a Displayport source / PC can be connected to a mini-Displayport display.

DisplayPort is a new technology that is looking to replace DVI and VGA as a video connection. The DisplayPort cable is notably smaller than both of these technologies and includes a snap-lock connector to make connecting and disconnecting simple. Display Port will most likely become the new standard for high end video equipment. It is capable of carrying a high bandwidth digital audio and video signal.

Specifications

•8.64 Gbit/s forward link channel supports high resolution monitors up to 2560x1600 with single cable.
•8B/10B data transmission (up to 2.7 GHz symbol rate, up to 4 lanes, 8B/10B modulation).
•Open and extensible standard to help with broad adoption.
•Supports color depth of 6, 8, 10, 12 and 16 bits per component.
•Full bandwidth transmission (2560x1600p60)
•DisplayPort connector assists in blind connection.
•128-bit AES DisplayPort Content Protection (DPCP) support, and support for 40-bit High-bandwidth Digital Content Protection (HDCP) from version 1.1 onwards.
•Supports internal and external connections so that one standard can be used by computer makers reducing costs.
Price: R139.00 Manufacturer: HDCabling
Model Number: 1.8m_mini_DP_to_DP Added to Inventory on: Tuesday 10 August, 2010

1.8 Meter Male mini Displayport to Male mini Displayport cable
Most Apple Devices uses mini-Displayport (Same physical port size as Thunderbolt port) such as Macbook Pro, Macbook Air and also PC Graphics cards with mini-DP port video outputs.

DisplayPort is a technology that is looking to replace DVI and VGA as a video connection. The mini-DisplayPort cable is notably smaller than both of these technologies and includes a snap-lock connector to make connecting and disconnecting simple. Display Port will most likely become the new standard for high end video equipment. It is capable of carrying a high bandwidth digital audio and video signal.

Specifications

•8.64 Gbit/s forward link channel supports high resolution monitors up to 2560x1600 with single cable.
•8B/10B data transmission (up to 2.7 GHz symbol rate, up to 4 lanes, 8B/10B modulation).
•Open and extensible standard to help with broad adoption.
•Supports color depth of 6, 8, 10, 12 and 16 bits per component.
•Full bandwidth transmission (2560x1600p60)
•DisplayPort connector assists in blind connection.
•128-bit AES DisplayPort Content Protection (DPCP) support, and support for 40-bit High-bandwidth Digital Content Protection (HDCP) from version 1.1 onwards.
•Supports internal and external connections so that one standard can be used by computer makers reducing costs.
Price: R139.00 Manufacturer: HDCabling
Model Number: 1.8m_male_mini-dp_to_mini-dp Added to Inventory on: Sunday 08 July, 2012

1.8 Meter Male Standard Displayport to Standard Displayport Male Cable - 28AWG, Gold Plated
High Performance DisplayPort cable. These cables have pure copper conductors, gold plated connectors and shielding from EM and RF interferance. DisplayPort is based on a micro packet data transmission protocol that allows for feature additions in the future. It currently supports up to 8.64 gbps data rates.

Some HP and Dell Monitors already adapted to the displayport standard.

DisplayPort is a new digital video and audio connection standard designed by the Video Electronics Standards Association (VESA). It is a royalty-free technology designed primarily for the computer industry but also compatible for home theater application. The format supports both digital video and audio using a single cable.

DisplayPort was primarily designed as a replacement for VGA, DVI and LVDS which are common interfaces used in the computer / IT industries, while HDMI was developed by the Consumer Electronics Industry specifically for Home Theater applications. Toward this end, DisplayPort has certain enhanced features such as direct drive monitor design and single cable multi-function monitor connectivity. Some advantages of HDMI are the ability to support xvYCC color, Dolby TrueHD and CEC (Consumer Electronics Control) signals.
Though both share powerfull A/V features, DisplayPort was designed to complement HDMI, not to replace it.

Related Keywords : displayport cable, dp cable, cable for dell displayport, cable displayport, cable DP
Price: R119.00 Manufacturer: HDCabling
Model Number: 1.8m_Male_DP_to_Male_DP_Cable Added to Inventory on: Wednesday 04 November, 2009

1.8 Meter mini Displayport Extension Cable - Male to Female mini-DP
Our Mini Displayport extension cable is the perfect solution to extend your current mini-displayport cable connected to Macbook Pro, Macbook Air or ATI Graphics card with mini-DP port to a display that has mini-displayport input.

DisplayPort is a new technology that is looking to replace DVI and VGA as a video connection. The mini-DisplayPort cable is notably smaller than both of these technologies and includes a snap-lock connector to make connecting and disconnecting simple. Display Port will most likely become the new standard for high end video equipment. It is capable of carrying a high bandwidth digital audio and video signal.

Specifications

•8.64 Gbit/s forward link channel supports high resolution monitors up to 2560x1600 with single cable.
•8B/10B data transmission (up to 2.7 GHz symbol rate, up to 4 lanes, 8B/10B modulation).
•Open and extensible standard to help with broad adoption.
•Supports color depth of 6, 8, 10, 12 and 16 bits per component.
•Full bandwidth transmission (2560x1600p60)
•DisplayPort connector assists in blind connection.
•128-bit AES DisplayPort Content Protection (DPCP) support, and support for 40-bit High-bandwidth Digital Content Protection (HDCP) from version 1.1 onwards.
•Supports internal and external connections so that one standard can be used by computer makers reducing costs.
Price: R139.00 Manufacturer: HDCabling
Model Number: 1.8m_mini_DP_Extension Added to Inventory on: Wednesday 13 October, 2010

10 Meter HDMI to HDMI v1.4 Cable - Gold Plated, High Speed, Supports up to 4K resolutions, 3D, Ethernet Channel
HDMI v1.4 cables are backwards compatible with all HDMI v1.0, v1.1, v1.2 and v1.3 devices and features the new specifications included with HDMI v1.4. For more information with regards to the HDMI v1.4 spec please see the full details at HDMI v1.4 Specifications. Actual image on the right might be different since cable molds change frequently. Cable molds still remain black PVC, Gold Plated with the HDMI v1.4 specifications below.

Tested 100% with all common HDMI sources such as Multichoice HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

This CABLE is For:

- Any Device with an HDMI Interface (Backwards Compatible to HDMI V1.0)
- To Connect any BLU-RAY / HD DVD / Multichoice HDPVR to a display or Digital Receiver to provide Audio / Video travelling via the same cable for HD Video/Audio
- Connect your XBOX 360 / PS3 Gaming Console to a display / digital receiver with a HDMI interface (Provides > 1080p resolutions, specs below)
- To connect current DVD players with a HDMI interface to a display / digital receiver to allow upscaling of normal DVD resolution to 1080p

New HDMI v1.4 features

● HDMI Ethernet Channel
● Audio Return Channel
● 3D (For PC's rendering 2 x 1080p images to produce a 3D Effect)
● 4K Resolution Support - 4096 x 2160 pixels
● Content Type
● Additional Color Spaces

HDMI Ethernet Channel technology consolidates video, audio, and data streams into a single HDMI cable, combining the umatched signal quality and convenience of HDMI connectivity with the power and flexibility of home entertainment networking. It incorporates a dedicated data channel into the HDMI link, enabling high-speed, bi-directional networking at up to 100 Mb/sec.
HDMI v1.4 before and after Ethernet Channel

Specifications & Features

Connector Type: HDMI male to HDMI male
Connector: Oxygen Free Copper
Connector Finish: Gold, Superior Signal transfer
Gauge: 24AWG
# of conductors: 19
Shielding level: Triple
Shielding type: EMI
Supported Resolutions: Up to 4K resolutions (Exceeds 1080p resolution by more than 2x), 4096 pixels wide by 2160 pixels high.
HDMI Certified: Yes
HDMI Spec: v1.4
HDCP Compliant: Yes
CEC Compliant: Yes
ROHS Compliant: Yes
1.3 Device Compatible: Yes
Supports DVD Audio: Yes
Supports SACD: Yes
Supports TrueHD & DTS-HD: Yes
Overall Diameter: 11 mm

UL Specs

CL2 (In-Wall): No
Voltage Rating: 30V
Temperature Rating: 80° C

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. To extend HDMI cables use the HDMI Coupler / Socket - Female to Female (Gold Plated Connectors)

Some sources / players do not produce an equalized HDMI signal and for coupling or extending HDMI Cable lengths beyond 15 meters we recommend that a HDMI Active Equalizer Extender / Repeater be used rather than a HDMI Coupler.

For lengths exceeding 25 meters and with conduit cable space restrictions we recommend either of the following products HDMI Extender CAT-5e / CAT-6 w/Tx + Rx (30m 1080p) or HDMI Super Extender CAT6 w/Tx + Rx (50m-60m 1080p)

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON.

Please check the HDMI Standards & Specifications section on our website to check what the different versions in HDMI offers regarding picture, sound quality, resolution, colour quality etc.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.

Related keywords : audio video cable, hdmi cable for lcd, dvi to hdmi, 1 meter hdmi cables, cheap hdmi cables, hdmi leads, hdmi analog, 1 meter hdmi cable, cable dvd hdmi, hdmi cable for hdtv, 1 meter cable, audio video cables, hdmi dvi cable, premium hdmi cable
Price: R379.00 Manufacturer: HDCabling
Model Number: 10m_HDMI_v1.4_Cable Added to Inventory on: Tuesday 12 July, 2011

10 Meter Mini HDMI (Type C) to Standard HDMI (Type A) Cable v1.3a (Gold Plated Connectors)
This cable will allow you to connect your portable device / HD Video Cameras with a mini-HDMI connector (Type C) to the standard HDMI connector (type A) found on most televisions / LCD's / Plasmas and A/V recievers. You can also use this cable for standard HDMI installations where conduit is a restriction by installing the small mini-HDMI heads in the conduit (9mm head compared to standard HDMI 19mm head) and using a Female mini-HDMI to Male HDMI Adapter on the cable mini-HDMI side to have a HDMI to HDMI Standard Type A Male to male cable.

Specifications & Features

Connector Type: HDMI male to HDMI male
Connector Finish: Gold
Gauge: 30AWG
# of conductors: 19
Supported Resolutions: 480i to 1080p
HDMI Certified: Yes
HDMI Spec: 1.3
HDCP Compliant: Yes
CEC Compliant: Yes
ROHS Compliant: Yes

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. This item conforms to the HDMI v1.3 specifications described in the section. In general for Blu-ray HDMI v1.0 is required as a minimum and for PS3 / Xbox 360 HDMI v1.2 is recommended as a minimum. HDMI v1.3 exceeds both HDMI v1.0 and v1.2 specifications.

HDMI Mini (type C) connectors were released Nov 2007 for connecting HDMI equipped portable devices such as high definition camcorders / Video Cameras.

Please check the HDMI Standards & Specifications section on our website to check what the different versions in HDMI offers regarding picture, sound quality, resolution, colour quality etc.

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON. The sequence below should be followed when installing new cables or equipment between source/player and LCD / Plasma.

1.) Power-off all equipment (At the wall socket).
2.) Connect all Cables, Splitters, Switches, Extenders within HDMI Distribution Network.
3.) Power on all Splitters, Switches, Extenders within HDMI Distribution Network.
4.) Power on all LCD / Plasma's and set to HDMI input from HDMI Distribution Network.
5.) Power on Sources / Players (Sources negotiates HDCP Handshake via HDMI Network to displays which is set to HDMI input to respond to handshake).

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.



Related keywords : mini-hdmi, hdmi to mini hdmi, mini hdmi cable, mini hdmi to hdmi, mini hdmi video camera
Price: R279.00 Manufacturer: HDCabling
Model Number: 10m_mini_HDMI_Cable Added to Inventory on: Friday 31 August, 2012

15 Meter HDMI to HDMI v1.4 Cable - Gold Plated, High Speed, Supports up to 4K resolutions, 3D, Ethernet Channel
HDMI v1.4 cables are backwards compatible with all HDMI v1.0, v1.1, v1.2 and v1.3 devices and features the new specifications included with HDMI v1.4. For more information with regards to the HDMI v1.4 spec please see the full details at HDMI v1.4 Specifications. Actual image on the right might be different since cable molds change frequently. Cable molds still remain black PVC, Gold Plated with the HDMI v1.4 specifications below.

Tested 100% with all common HDMI sources such as Multichoice HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

This CABLE is For:

- Any Device with an HDMI Interface (Backwards Compatible to HDMI V1.0)
- To Connect any BLU-RAY / HD DVD / Multichoice HDPVR to a display or Digital Receiver to provide Audio / Video travelling via the same cable for HD Video/Audio
- Connect your XBOX 360 / PS3 Gaming Console to a display / digital receiver with a HDMI interface (Provides > 1080p resolutions, specs below)
- To connect current DVD players with a HDMI interface to a display / digital receiver to allow upscaling of normal DVD resolution to 1080p

New HDMI v1.4 features

● HDMI Ethernet Channel
● Audio Return Channel
● 3D (For PC's rendering 2 x 1080p images to produce a 3D Effect)
● 4K Resolution Support - 4096 x 2160 pixels
● Content Type
● Additional Color Spaces

HDMI Ethernet Channel technology consolidates video, audio, and data streams into a single HDMI cable, combining the umatched signal quality and convenience of HDMI connectivity with the power and flexibility of home entertainment networking. It incorporates a dedicated data channel into the HDMI link, enabling high-speed, bi-directional networking at up to 100 Mb/sec.
HDMI v1.4 before and after Ethernet Channel

Specifications & Features

Connector Type: HDMI male to HDMI male
Connector: Oxygen Free Copper
Connector Finish: Gold, Superior Signal transfer
Gauge: 24AWG
# of conductors: 19
Shielding level: Triple
Shielding type: EMI
Supported Resolutions: Up to 4K resolutions (Exceeds 1080p resolution by more than 2x), 4096 pixels wide by 2160 pixels high.
HDMI Certified: Yes
HDMI Spec: v1.4
HDCP Compliant: Yes
CEC Compliant: Yes
ROHS Compliant: Yes
1.3 Device Compatible: Yes
Supports DVD Audio: Yes
Supports SACD: Yes
Supports TrueHD & DTS-HD: Yes
Overall Diameter: 11 mm

UL Specs

CL2 (In-Wall): No
Voltage Rating: 30V
Temperature Rating: 80° C

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. To extend HDMI cables use the HDMI Coupler / Socket - Female to Female (Gold Plated Connectors)

Some sources / players do not produce an equalized HDMI signal and for coupling or extending HDMI Cable lengths beyond 15 meters we recommend that a HDMI Active Equalizer Extender / Repeater be used rather than a HDMI Coupler.

For lengths exceeding 25 meters and with conduit cable space restrictions we recommend either of the following products HDMI Extender CAT-5e / CAT-6 w/Tx + Rx (30m 1080p) or HDMI Super Extender CAT6 w/Tx + Rx (50m-60m 1080p)

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON.

Please check the HDMI Standards & Specifications section on our website to check what the different versions in HDMI offers regarding picture, sound quality, resolution, colour quality etc.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.

Related keywords : audio video cable, hdmi cable for lcd, dvi to hdmi, 1 meter hdmi cables, cheap hdmi cables, hdmi leads, hdmi analog, 1 meter hdmi cable, cable dvd hdmi, hdmi cable for hdtv, 1 meter cable, audio video cables, hdmi dvi cable, premium hdmi cable
Price: R499.00 Manufacturer: HDCabling
Model Number: 15m_HDMI_v1.4_Cable Added to Inventory on: Monday 05 September, 2011

20 Meter HDMI to HDMI v1.4 Cable - Gold Plated, High Speed, Supports up to 4K resolutions, 3D, Ethernet Channel
HDMI v1.4 cables are backwards compatible with all HDMI v1.0, v1.1, v1.2 and v1.3 devices and features the new specifications included with HDMI v1.4. For more information with regards to the HDMI v1.4 spec please see the full details at HDMI v1.4 Specifications. Actual image on the right might be different since cable molds change frequently. Cable molds still remain black PVC, Gold Plated with the HDMI v1.4 specifications below.

Tested 100% with all common HDMI sources such as Multichoice HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

This CABLE is For:

- Any Device with an HDMI Interface (Backwards Compatible to HDMI V1.0)
- To Connect any BLU-RAY / HD DVD / Multichoice HDPVR to a display or Digital Receiver to provide Audio / Video travelling via the same cable for HD Video/Audio
- Connect your XBOX 360 / PS3 Gaming Console to a display / digital receiver with a HDMI interface (Provides > 1080p resolutions, specs below)
- To connect current DVD players with a HDMI interface to a display / digital receiver to allow upscaling of normal DVD resolution to 1080p

New HDMI v1.4 features

● HDMI Ethernet Channel
● Audio Return Channel
● 3D (For PC's rendering 2 x 1080p images to produce a 3D Effect)
● 4K Resolution Support - 4096 x 2160 pixels
● Content Type
● Additional Color Spaces

HDMI Ethernet Channel technology consolidates video, audio, and data streams into a single HDMI cable, combining the umatched signal quality and convenience of HDMI connectivity with the power and flexibility of home entertainment networking. It incorporates a dedicated data channel into the HDMI link, enabling high-speed, bi-directional networking at up to 100 Mb/sec.
HDMI v1.4 before and after Ethernet Channel

Specifications & Features

Connector Type: HDMI male to HDMI male
Connector: Oxygen Free Copper
Connector Finish: Gold, Superior Signal transfer
Gauge: 24AWG
# of conductors: 19
Shielding level: Triple
Shielding type: EMI
Supported Resolutions: Up to 4K resolutions (Exceeds 1080p resolution by more than 2x), 4096 pixels wide by 2160 pixels high.
HDMI Certified: Yes
HDMI Spec: v1.4
HDCP Compliant: Yes
CEC Compliant: Yes
ROHS Compliant: Yes
1.3 Device Compatible: Yes
Supports DVD Audio: Yes
Supports SACD: Yes
Supports TrueHD & DTS-HD: Yes
Overall Diameter: 11 mm

UL Specs

CL2 (In-Wall): No
Voltage Rating: 30V
Temperature Rating: 80° C

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. To extend HDMI cables use the HDMI Coupler / Socket - Female to Female (Gold Plated Connectors)

Some sources / players do not produce an equalized HDMI signal and for coupling or extending HDMI Cable lengths beyond 15 meters we recommend that a HDMI Active Equalizer Extender / Repeater be used rather than a HDMI Coupler.

For lengths exceeding 25 meters and with conduit cable space restrictions we recommend either of the following products HDMI Extender CAT-5e / CAT-6 w/Tx + Rx (30m 1080p) or HDMI Super Extender CAT6 w/Tx + Rx (50m-60m 1080p)

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON.

Please check the HDMI Standards & Specifications section on our website to check what the different versions in HDMI offers regarding picture, sound quality, resolution, colour quality etc.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.

Related keywords : audio video cable, hdmi cable for lcd, dvi to hdmi, 1 meter hdmi cables, cheap hdmi cables, hdmi leads, hdmi analog, 1 meter hdmi cable, cable dvd hdmi, hdmi cable for hdtv, 1 meter cable, audio video cables, hdmi dvi cable, premium hdmi cable
Price: R659.00 Manufacturer: HDCabling
Model Number: 20m_HDMI_v1.4_Cable Added to Inventory on: Tuesday 12 July, 2011

28AWG 10 Meter HDMI to HDMI v1.3 Category 1 Cable - Gold Plated
HDMI v1.3 cables are backwards compatible with all HDMI v1.0, v1.1 and v1.2 devices and features the specifications included with HDMI v1.3. Actual image on the right might be different since cable molds change frequently. Cable molds still remain black PVC, Gold Plated with the specifications below as per product sheet.

Tested 100% with all common HDMI sources such as Multichoice HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

This CABLE is For:

- Any Device with an HDMI Interface (Backwards Compatible to HDMI V1.0)
- To Connect any BLU-RAY / HD DVD / Multichoice HDPVR to a display or Digital Receiver to provide Audio / Video travelling via the same cable for HD Video/Audio
- Connect your XBOX 360 / PS3 Gaming Console to a display / digital receiver with a HDMI interface (Provides up to 1080i resolutions, specs below)
- To connect current DVD players with a HDMI interface to a display / digital receiver to allow upscaling of normal DVD resolution to 1080p

Specifications & Features

Connector Type: HDMI male to HDMI male
Connector: Oxygen Free Copper
Connector Finish: Gold, Superior Signal transfer
Gauge: 28AWG
# of conductors: 19
Shielding level: Triple
Shielding type: EMI
Supported Resolutions: 720p/1080i. 1080p might be supported depending on source signal strength, color-depth and video compression. Cable is category 1 rated and recommended for DSTV / HDPVR installations supporting 720p/1080i only
HDMI Certified: Yes
HDMI Spec: v1.3
HDCP Compliant: Yes
CEC Compliant: Yes
ROHS Compliant: Yes
Supports DVD Audio: Yes
Supports SACD: Yes
Supports TrueHD & DTS-HD: Yes
Overall Diameter: 7mm

UL Specs

CL2 (In-Wall): No
Voltage Rating: 30V
Temperature Rating: 80° C

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. To extend HDMI cables use the HDMI Coupler / Socket - Female to Female (Gold Plated Connectors)

Some sources / players do not produce an equalized HDMI signal and for coupling or extending HDMI Cable lengths beyond 15 meters we recommend that a HDMI Active Equalizer Extender / Repeater be used rather than a HDMI Coupler.

For lengths exceeding 25 meters and with conduit cable space restrictions we recommend either of the following products HDMI Extender CAT-5e / CAT-6 w/Tx + Rx (30m 1080p) or HDMI Super Extender CAT6 w/Tx + Rx (50m-60m 1080p)

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON.

Please check the HDMI Standards & Specifications section on our website to check what the different versions in HDMI offers regarding picture, sound quality, resolution, colour quality etc.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.

Related keywords : audio video cable, hdmi cable for lcd, dvi to hdmi, 1 meter hdmi cables, cheap hdmi cables, hdmi leads, hdmi analog, 1 meter hdmi cable, cable dvd hdmi, hdmi cable for hdtv, 1 meter cable, audio video cables, hdmi dvi cable, premium hdmi cable
Price: R249.00 Manufacturer: HDCabling
Model Number: 28_AWG_10m_HDMI Added to Inventory on: Friday 31 August, 2012

3 Meter HDMI to HDMI v1.4 Cable - Gold Plated, High Speed, Supports up to 4K resolutions, 3D, Ethernet Channel
HDMI v1.4 cables are backwards compatible with all HDMI v1.0, v1.1, v1.2 and v1.3 devices and features the new specifications included with HDMI v1.4. For more information with regards to the HDMI v1.4 spec please see the full details at HDMI v1.4 Specifications. Actual image on the right might be different since cable molds change frequently. Cable molds still remain black PVC, Gold Plated with the HDMI v1.4 specifications below.

Tested 100% with all common HDMI sources such as Multichoice HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

This CABLE is For:

- Any Device with an HDMI Interface (Backwards Compatible to HDMI V1.0)
- To Connect any BLU-RAY / HD DVD / Multichoice HDPVR to a display or Digital Receiver to provide Audio / Video travelling via the same cable for HD Video/Audio
- Connect your XBOX 360 / PS3 Gaming Console to a display / digital receiver with a HDMI interface (Provides > 1080p resolutions, specs below)
- To connect current DVD players with a HDMI interface to a display / digital receiver to allow upscaling of normal DVD resolution to 1080p

New HDMI v1.4 features

● HDMI Ethernet Channel
● Audio Return Channel
● 3D (For PC's rendering 2 x 1080p images to produce a 3D Effect)
● 4K Resolution Support - 4096 x 2160 pixels
● Content Type
● Additional Color Spaces

HDMI Ethernet Channel technology consolidates video, audio, and data streams into a single HDMI cable, combining the umatched signal quality and convenience of HDMI connectivity with the power and flexibility of home entertainment networking. It incorporates a dedicated data channel into the HDMI link, enabling high-speed, bi-directional networking at up to 100 Mb/sec.
HDMI v1.4 before and after Ethernet Channel

Specifications & Features

Connector Type: HDMI male to HDMI male
Connector: Oxygen Free Copper
Connector Finish: Gold, Superior Signal transfer
Gauge: 28AWG
# of conductors: 19
Shielding level: Triple
Shielding type: EMI
Supported Resolutions: Up to 4K resolutions (Exceeds 1080p resolution by more than 2x), 4096 pixels wide by 2160 pixels high.
HDMI Certified: Yes
HDMI Spec: v1.4
HDCP Compliant: Yes
CEC Compliant: Yes
ROHS Compliant: Yes
1.3 Device Compatible: Yes
Supports DVD Audio: Yes
Supports SACD: Yes
Supports TrueHD & DTS-HD: Yes
Overall Diameter: 7mm

UL Specs

CL2 (In-Wall): No
Voltage Rating: 30V
Temperature Rating: 80° C

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. To extend HDMI cables use the HDMI Coupler / Socket - Female to Female (Gold Plated Connectors)

Some sources / players do not produce an equalized HDMI signal and for coupling or extending HDMI Cable lengths beyond 15 meters we recommend that a HDMI Active Equalizer Extender / Repeater be used rather than a HDMI Coupler.

For lengths exceeding 25 meters and with conduit cable space restrictions we recommend either of the following products HDMI Extender CAT-5e / CAT-6 w/Tx + Rx (30m 1080p) or HDMI Super Extender CAT6 w/Tx + Rx (50m-60m 1080p)

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON.

Please check the HDMI Standards & Specifications section on our website to check what the different versions in HDMI offers regarding picture, sound quality, resolution, colour quality etc.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.

Related keywords : audio video cable, hdmi cable for lcd, dvi to hdmi, 1 meter hdmi cables, cheap hdmi cables, hdmi leads, hdmi analog, 1 meter hdmi cable, cable dvd hdmi, hdmi cable for hdtv, 1 meter cable, audio video cables, hdmi dvi cable, premium hdmi cable
Price: R95.00 Manufacturer: HDCabling
Model Number: 3m_HDMI_v1.4_Cable Added to Inventory on: Tuesday 30 November, 2010

30 Meter HDMI to HDMI v1.4 Cable 22AWG - Gold Plated, High Speed, Supports up to 4K resolutions, 3D, Ethernet Channel
HDMI v1.4 cables are backwards compatible with all HDMI v1.0, v1.1, v1.2 and v1.3 devices and features the new specifications included with HDMI v1.4. For more information with regards to the HDMI v1.4 spec please see the full details at HDMI v1.4 Specifications. Actual image on the right might be different since cable molds change frequently. Cable molds still remain black PVC, Gold Plated with the HDMI v1.4 specifications below.

Tested 100% with all common HDMI sources such as Multichoice HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

This CABLE is For:

- Any Device with an HDMI Interface (Backwards Compatible to HDMI V1.0)
- To Connect any BLU-RAY / HD DVD / Multichoice HDPVR to a display or Digital Receiver to provide Audio / Video travelling via the same cable for HD Video/Audio
- Connect your XBOX 360 / PS3 Gaming Console to a display / digital receiver with a HDMI interface (Provides > 1080p resolutions, specs below)
- To connect current DVD players with a HDMI interface to a display / digital receiver to allow upscaling of normal DVD resolution to 1080p

New HDMI v1.4 features

● HDMI Ethernet Channel
● Audio Return Channel
● 3D (For PC's rendering 2 x 1080p images to produce a 3D Effect)
● 4K Resolution Support - 4096 x 2160 pixels
● Content Type
● Additional Color Spaces

HDMI Ethernet Channel technology consolidates video, audio, and data streams into a single HDMI cable, combining the umatched signal quality and convenience of HDMI connectivity with the power and flexibility of home entertainment networking. It incorporates a dedicated data channel into the HDMI link, enabling high-speed, bi-directional networking at up to 100 Mb/sec.
HDMI v1.4 before and after Ethernet Channel

Specifications & Features

Connector Type: HDMI male to HDMI male
Connector: Oxygen Free Copper
Connector Finish: Gold, Superior Signal transfer
Gauge: 22AWG / 11-12mm width
# of conductors: 19
Shielding level: Triple
Shielding type: EMI
Supported Resolutions: Up to 4K resolutions (Exceeds 1080p resolution by more than 2x), 4096 pixels wide by 2160 pixels high.
HDMI Certified: Yes
HDMI Spec: v1.4
HDCP Compliant: Yes
CEC Compliant: Yes
ROHS Compliant: Yes
1.3 Device Compatible: Yes
Supports DVD Audio: Yes
Supports SACD: Yes
Supports TrueHD & DTS-HD: Yes
Overall Diameter: 11 mm

UL Specs

CL2 (In-Wall): No
Voltage Rating: 30V
Temperature Rating: 80° C

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. To extend HDMI cables use the HDMI Coupler / Socket - Female to Female (Gold Plated Connectors)

Some sources / players do not produce an equalized HDMI signal and for coupling or extending HDMI Cable lengths beyond 15 meters we recommend that a HDMI Active Equalizer Extender / Repeater be used rather than a HDMI Coupler.

For lengths exceeding 25 meters and with conduit cable space restrictions we recommend either of the following products HDMI Extender CAT-5e / CAT-6 w/Tx + Rx (30m 1080p) or HDMI Super Extender CAT6 w/Tx + Rx (50m-60m 1080p)

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON.

Please check the HDMI Standards & Specifications section on our website to check what the different versions in HDMI offers regarding picture, sound quality, resolution, colour quality etc.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.

Related keywords : audio video cable, hdmi cable for lcd, dvi to hdmi, 1 meter hdmi cables, cheap hdmi cables, hdmi leads, hdmi analog, 1 meter hdmi cable, cable dvd hdmi, hdmi cable for hdtv, 1 meter cable, audio video cables, hdmi dvi cable, premium hdmi cable
Price: R1,199.00 Manufacturer: HDCabling
Model Number: 30m_HDMI_v1.4_Cable Added to Inventory on: Wednesday 30 November, 2011

5 Meter HDMI to HDMI v1.4 Cable - Gold Plated, High Speed, Supports up to 4K resolutions, 3D, Ethernet Channel
HDMI v1.4 cables are backwards compatible with all HDMI v1.0, v1.1, v1.2 and v1.3 devices and features the new specifications included with HDMI v1.4. For more information with regards to the HDMI v1.4 spec please see the full details at HDMI v1.4 Specifications. Actual image on the right might be different since cable molds change frequently. Cable molds still remain black PVC, Gold Plated with the HDMI v1.4 specifications below.

Tested 100% with all common HDMI sources such as Multichoice HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

This CABLE is For:

- Any Device with an HDMI Interface (Backwards Compatible to HDMI V1.0)
- To Connect any BLU-RAY / HD DVD / Multichoice HDPVR to a display or Digital Receiver to provide Audio / Video travelling via the same cable for HD Video/Audio
- Connect your XBOX 360 / PS3 Gaming Console to a display / digital receiver with a HDMI interface (Provides > 1080p resolutions, specs below)
- To connect current DVD players with a HDMI interface to a display / digital receiver to allow upscaling of normal DVD resolution to 1080p

New HDMI v1.4 features

● HDMI Ethernet Channel
● Audio Return Channel
● 3D (For PC's rendering 2 x 1080p images to produce a 3D Effect)
● 4K Resolution Support - 4096 x 2160 pixels
● Content Type
● Additional Color Spaces

HDMI Ethernet Channel technology consolidates video, audio, and data streams into a single HDMI cable, combining the umatched signal quality and convenience of HDMI connectivity with the power and flexibility of home entertainment networking. It incorporates a dedicated data channel into the HDMI link, enabling high-speed, bi-directional networking at up to 100 Mb/sec.
HDMI v1.4 before and after Ethernet Channel

Specifications & Features

Connector Type: HDMI male to HDMI male
Connector: Oxygen Free Copper
Connector Finish: Gold, Superior Signal transfer
Gauge: 28AWG
# of conductors: 19
Shielding level: Triple
Shielding type: EMI
Supported Resolutions: Up to 4K resolutions (Exceeds 1080p resolution by more than 2x), 4096 pixels wide by 2160 pixels high.
HDMI Certified: Yes
HDMI Spec: v1.4
HDCP Compliant: Yes
CEC Compliant: Yes
ROHS Compliant: Yes
1.3 Device Compatible: Yes
Supports DVD Audio: Yes
Supports SACD: Yes
Supports TrueHD & DTS-HD: Yes
Overall Diameter: 7mm

UL Specs

CL2 (In-Wall): No
Voltage Rating: 30V
Temperature Rating: 80° C

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. To extend HDMI cables use the HDMI Coupler / Socket - Female to Female (Gold Plated Connectors)

Some sources / players do not produce an equalized HDMI signal and for coupling or extending HDMI Cable lengths beyond 15 meters we recommend that a HDMI Active Equalizer Extender / Repeater be used rather than a HDMI Coupler.

For lengths exceeding 25 meters and with conduit cable space restrictions we recommend either of the following products HDMI Extender CAT-5e / CAT-6 w/Tx + Rx (30m 1080p) or HDMI Super Extender CAT6 w/Tx + Rx (50m-60m 1080p)

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON.

Please check the HDMI Standards & Specifications section on our website to check what the different versions in HDMI offers regarding picture, sound quality, resolution, colour quality etc.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.

Related keywords : audio video cable, hdmi cable for lcd, dvi to hdmi, 1 meter hdmi cables, cheap hdmi cables, hdmi leads, hdmi analog, 1 meter hdmi cable, cable dvd hdmi, hdmi cable for hdtv, 1 meter cable, audio video cables, hdmi dvi cable, premium hdmi cable
Price: R115.00 Manufacturer: HDCabling
Model Number: 5m_HDMI_v1.4_Cable Added to Inventory on: Monday 23 May, 2011

5 Meter MINI HDMI (Type C) to Standard HDMI (Type A) Cable v1.3a (Gold Plated Connectors)
This cable will allow you to connect your portable device / HD Video Cameras with a mini-HDMI connector (Type C) to the standard HDMI connector (type A) found on most televisions / LCD's / Plasmas and A/V recievers.

Specifications & Features

Connector Type: HDMI male to HDMI male
Connector Finish: Gold
Gauge: 30AWG
# of conductors: 19
Supported Resolutions: 480i to > 1080p
HDMI Certified: Yes
HDMI Spec: 1.3
HDCP Compliant: Yes
CEC Compliant: Yes
ROHS Compliant: Yes

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. This item conforms to the HDMI v1.3 specifications described in the section. In general for Blu-ray HDMI v1.0 is required as a minimum and for PS3 / Xbox 360 HDMI v1.2 is recommended as a minimum. HDMI v1.3 exceeds both HDMI v1.0 and v1.2 specifications.

HDMI Mini (type C) connectors are the new (from Nov 2007) high definition standard for connecting HDMI equipped portable devices such as high definition camcorders / Video Cameras.

Please check the HDMI Standards & Specifications section on our website to check what the different versions in HDMI offers regarding picture, sound quality, resolution, colour quality etc.

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON. The sequence below should be followed when installing new cables or equipment between source/player and LCD / Plasma.

1.) Power-off all equipment (At the wall socket).
2.) Connect all Cables, Splitters, Switches, Extenders within HDMI Distribution Network.
3.) Power on all Splitters, Switches, Extenders within HDMI Distribution Network.
4.) Power on all LCD / Plasma's and set to HDMI input from HDMI Distribution Network.
5.) Power on Sources / Players (Sources negotiates HDCP Handshake via HDMI Network to displays which is set to HDMI input to respond to handshake).

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.



Related keywords : mini-hdmi, hdmi to mini hdmi, mini hdmi cable, mini hdmi to hdmi, mini hdmi video camera
Price: R119.00 Manufacturer: HDCabling
Model Number: 5m_mini_HDMI_Cable Added to Inventory on: Tuesday 30 November, 2010

90 Degree Female HDMI Type A (Standard HDMI) to Male mini-HDMI (Type C) - Port Saver / Converter
Port Savers are the perfect solution for relieving wear and tear on your equipments HDMI ports due to constant plugging and unplugging or when heavy HDMI cables put extra strain on the connectors.

The 90 degree bend will ensure you can connect any standard HDMI cable to a device with a mini-HDMI (Type C) port (please check orientation of port on device to ensure connector points in correct direction needed).

You can also use this adapter to convert any length standard HDMI to HDMI cable (Type A) to a HDMI to mini-HDMI cable (Type A to Type C Cable)

Price: R55.00 Manufacturer: HDCabling
Model Number: F-HDMI_to_m_Mini_HDMI Added to Inventory on: Sunday 08 July, 2012

Active DVI-D to Displayport Cable (to connect Apple Mac display to DVI-D Graphics Card)
This adapter is used to connect any screen with a displayport interface to a DVI-D or HDMI Graphics card. It will actively convert the signal from DVI-D (or HDMI) to displayport. To connect a mini-Displayport Apple Mac display (which has an attached cable from display to mini displayport male connector), this active cable must be used in conjunction with the adapter cable at Male DisplayPort to mini Displayport Female Adapter Cable to have a Male DVI-D (which plugs into graphics card) to Female mini-Displayport solution (Which plugs into display with attached mini-Displayport connector).

If the graphics card is HDMI, use the DVI-D to HDMI Cable at 1.8 Meter HDMI to DVI-D Dual Link Cable

Max Supported Resolution : 720p / 1280 x 720
Price: R699.00 Manufacturer: HDCabling
Model Number: Active_DVI-D_to_DP_Female Added to Inventory on: Wednesday 15 August, 2012

Active Male Mini-Displayport to DVI-D Female Cable - ATI EyeFinity tested
These mini-DP to DVI-D adapters has been ATI Eyefinity tested for up to 6 screens installations. Image can be spread across all 6 screens to have one large image as per ATI Catalyst Driver configuration.

The Active Mini DisplayPort to Single-Link DVI-D adaptor supports resolutions up to 1920x1200 (WUXGA) and 1080p HDTV, fully compliant to both DPCP and HDCP to ensure the full compatibility and successful transmission of video content.

In addition, the adapter supports up to 32-bit color depths which delivers the flexibility to meet the needs of most display applications. It is suitable for ATI HD 6870 series, HD 5970, HD 5870 Eyefinity 6 and HD 5770 Eyefinity 5 and other ATI Graphics cards supporting ATI EYEFinity. By using this adaptor, gamers can take advantage of the latest Eyefinity technology without a DisplayPort monitor. The new adapter optimizes a user’s entertainment experience and productivity through DVI or HDMI monitors (by Using DVI to HDMI Cable) without any software to install, allowing enjoyment of lifelike gaming performance.

Connector: Mini DisplayPort (male) to DVI-D (female)
Resolution support: Up to 1920x1200 (WUXGA) and 1080P HDCP Compatibility: YES

Price: R349.00 Manufacturer: HDCabling
Model Number: Active_miniDP_to_DVI Added to Inventory on: Friday 05 August, 2011

Dual Port / 2-port HDMI Wallplate (Single Wallplate) - White
This is a dual port HDMI wall plate to allow connection of two separate HDMI Cables from different sources. This convenient wall plate has a female connector on the front and in back for easy installation. These wallplates are sold as single wallplates, but mostly installed in pairs (one near source / player) and one near far end LCD. Eliminate cable clutter by hiding your cables in-wall. This clean looking wall plate will give your home theater a professionally installed look. Complies with HDMI 1.3 standard.

Coupler style connectors feature female connections on both the front and back of the plate so there's no need to cut, splice, or solder any wires.
Price: R119.00 Manufacturer: HDCabling
Model Number: Dual_Port_HDMI_Wallplate Added to Inventory on: Wednesday 11 August, 2010

Female Dual Link DVI-A (DVI-I Port) to VGA-HD15 Male Adapter (Gold Plated)
Use this adapter to change your DVI-I connector to a regular VGA connector or to change VGA to DVI-A (For devices which can accept an analog DVI input using a DVI-I Connector).

Some video cards have a dual display capability. Use this adapter to allow dual display. You CANNOT use this adapter with a HDMI to DVI-D adapter to convert HDMI to VGA or visa versa since it is a digital to analog conversion and a powered converter must be used in this case such as the HDFURY / HDFURY2 or generic HDMI / DVI to VGA converter.

There are two types of DVI Connectors: DVI Analog and DVI Digital. If your DVI is digital, this DVI Adaptor will NOT work. Please check your DVI Pins carefully whether this DVI adaptor will fit in. See diagram below for the different types of DVI Connectors. This adapter uses a DVI-I Connector and the input / output pins of your devices should be the same as in the highlighted picture below.

DVI-D, DVI-I, DVI-A Connectors Difference

For example, if you have a ATI Radeon or Nvidia Dual Monitor PC graphics card, you can use this adapter to change one of your DVI connectors to a VGA connector to enable your Dual Monitor capability if the graphics card supports DVI-I output. It cannot be used on DVI-D only graphics cards.

Related Keywords : convert dvi to vga, convert vga to dvi, dvi converter, vga converter, convert dvi-i to vga, convert dvi-a to vga, convert vga to dvi-a, convert vga to dvi-i, graphics card to vga, PC graphics card to dvi
Price: R35.00 Manufacturer: HDCabling
Model Number: F_DVI_A_to_M_VGA_Converter Added to Inventory on: Wednesday 17 March, 2010

Female HDMI to DVI-D FEMALE Dual Link adapter (Gold Plated Connectors)
DVI-D Dual link cables / connectors are much higher rated on bandwidth (up to 2560 x 1600 resolution / 1600p) compared to single link which is only rated up to 1920x1200 resolutions. Most graphics cards and displays have DVI Dual link ports. Please check the picture below and compare to your current DVI port on the display or graphics card.

This adapter connects HDMI to DVI.

● DVI-D single link Female to HDMI Female
● 24k gold contacts provide accurate signal transfer and maximum corrosion resistance.
● Converts from Female HDMI input to DVI-D Female as in the picture below (product is female version of picture below).
● Bi-directional connection also possible from DVI-D Female input to HDMI Female output.

An additional HDMI-to-HDMI Cable is needed to connect the adapter.

The source output needs to support DVI-D digital signals. Most Nvidia and ATI graphics cards support DVI-I which can autoswitch between DVI-D (Digital) and DVI-A (Analog). To explain the differences in the variations of DVI connectors see the diagram below

DVI-D Dual Link indication

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this adapter and for alternative wiring options.

Related Keywords : video adapters, hdmi to dvi female, hdmi converter female, hdmi female input, hdmi female connection, video cable connector, digital convert, video converter, hdmi female dvi female, dvi female to hdmi female, video convert
Price: R49.00 Manufacturer: HDCabling
Model Number: DVI_D_Female_HDMI_Female Added to Inventory on: Tuesday 24 March, 2009

Female HDMI to DVI-D MALE Dual Link adapter (Gold Plated Connectors)
DVI-D Dual link cables / connectors are much higher rated on bandwidth (up to 2560 x 1600 resolution / 1600p) compared to single link which is only rated up to 1920x1200 resolutions. Most graphics cards and displays have DVI Dual link ports. Please check the picture below and compare to your current DVI port on the display or graphics card.

Use this adapter to connect your current HDMI Gaming Console / XBOX 360 / Playstation 3 / BLU-RAY DVD player Video from HDMI to DVI directly to your PC Screen / LCD instead of the TV. An additional HDMI-to-HDMI Cable is needed to connect the adapter.

The converter is bi-directional and can also by used to connect your PC Graphics Card (DVI Output) to the HDMI Port on your HDMI display by using a HDMI-to-HDMI Cable together with this converter. The graphics card output needs to support DVI-D digital signals. Most Nvidia and ATI graphics cards support DVI-I which can autoswitch between DVI-D (Digital) and DVI-A (Analog). To explain the differences in the variations of DVI connectors see the diagram below

DVI-D Dual Link indication

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this adapter and for alternative wiring options.

This adapter converts HDMI Male to DVI Male connector. A DVI to HDMI adapter is also used to connect older home theater equipment with DVI connectors to newer HDTV televisions and projectors which have HDMI connectors.

When using a HDCP Player / Source Device with these connectors please ensure that your display is HDCP certified otherwise the source device will have issues regarding the HDCP Protocol. This adapter transmits video only from HDMI to DVI and the audio needs to be on a separate cable such as optical, coaxial RCA, analog etc.

Related Keywords : video adapters, hdmi to dvi, hdmi converter, hdmi input, hdmi connection, video cable connector, digital convert, video converter, hdmi dvi, dvi to hdmi, video convert
Price: R49.00 Manufacturer: HDCabling
Model Number: DVI_D_to_HDMI_Convert Added to Inventory on: Monday 26 May, 2008

Female HDMI Type A (Standard HDMI) to Male micro HDMI (Type D) adapter
You can use this adapter to convert any length standard HDMI to HDMI cable (Type A) to a HDMI to micro-HDMI cable (Type A to Type D Cable)

Price: R59.00 Manufacturer: HDCabling
Model Number: F-HDMI_to_m_Mini_HDMI Added to Inventory on: Sunday 08 July, 2012

Flexible 1.5 Meter HDMI to HDMI Cable v1.3 - Gold Plated, High Speed
Specifications & Features

Connector Type: HDMI male to HDMI male
Connector Finish: Gold
Gauge: 30AWG
# of conductors: 19
Supported Resolutions: 480i to > 1080p
HDMI Certified: Yes
HDMI Spec: 1.3
HDCP Compliant: Yes
CEC Compliant: Yes
ROHS Compliant: Yes

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. This item conforms to the HDMI v1.3 specifications described in the section. In general for Blu-ray HDMI v1.0 is required as a minimum and for PS3 / Xbox 360 HDMI v1.2 is recommended as a minimum. HDMI v1.3 exceeds both HDMI v1.0 and v1.2 specifications.

Please check the HDMI Standards & Specifications section on our website to check what the different versions in HDMI offers regarding picture, sound quality, resolution, colour quality etc.

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON. The sequence below should be followed when installing new cables or equipment between source/player and LCD / Plasma.

1.) Power-off all equipment (At the wall socket).
2.) Connect all Cables, Splitters, Switches, Extenders within HDMI Distribution Network.
3.) Power on all Splitters, Switches, Extenders within HDMI Distribution Network.
4.) Power on all LCD / Plasma's and set to HDMI input from HDMI Distribution Network.
5.) Power on Sources / Players (Sources negotiates HDCP Handshake via HDMI Network to displays which is set to HDMI input to respond to handshake).

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.



Related keywords : mini-hdmi, hdmi to mini hdmi, mini hdmi cable, mini hdmi to hdmi, mini hdmi video camera
Price: R85.00 Manufacturer: HDCabling
Model Number: 1.5m_Flexible_HD_Cable Added to Inventory on: Wednesday 25 January, 2012

Gas Popup Panel for HDMI, VGA, Audio, Composite, USB, AC Power & RJ45 Networking
Gas Pop-ups also referred to as Popup Boxes or Hidden Desktop Sockets are used to hide away cables in boardrooms, testing stations where multiple connections of Video & Audio is used and a clean installation is required of cabling. When installed the popup will be level with the table or wall and releases on push action to popup and have ready-to-connect adapters for most available video & audio sources as listed below. The connectors on the gas popup panel features coupler based connections (Female to Female Sockets) to easily connect laptops, tablets, DVD Players, Blu-ray Players, Gaming consoles and any other sources with the outputs as specified below.

Specifications

■ Colour : Black (as per product picture)
■ Video Connections : HDMI Type A (Standard HDMI Socket), VGA Female connector, Composite Video (Yellow RCA Connector).
■ Audio Connections : Stereo 3.5mm female audio jack & Female Stereo RCA (Red/White) Audio Connectors.
■ Networking Connections : 2 x RJ45 Female Sockets
■ Data Connections : 1 x USB Type A Female Socket
■ Power Connections : 2-way or 3-way South African 220v Power plugs, rated current 10 Amp.
■ Weight : 900g
■ Panel Size : 26.4 cm, W: 12 cm
■ Install Size (cut-out in wall or table) : L : 22 cm, W: 11 cm

Price: R849.00 Manufacturer: HDCabling
Model Number: Gas_Popup_Panel Added to Inventory on: Wednesday 15 August, 2012

HDMI Audio Decoder – HDMI Input to HDMI Output + SPDIF Toslink Audio and Stereo Audio (3.5mm or Red/White RCA Audio)

The mini HDMI to HDMI+Audio Converter increases the SPDIF (Optical Toslink) and 3.5mm analog stereo audio output on the unit, here by splitting your video and audio going to two different input devices. The 3.5mm analog stereo audio and SPDIF (OPtical Toslink) can be easily connected to earphones or audio power amplifier/ receivers.

Please find the two cables required for this unit, depending on which audio out you'll be using:

Specifications:

  1. Input port: 1xHDMI.
  2. Output ports: 1xHDMI, 1x3.5mmPhoneJack, 1x Toslink
  3. Dimensions (mm): 60(D)x55(W)x20(H)
  4. Wight (g): 40

Device Sides:

Setup Diagram:



Price: R669.00 Manufacturer: HDCabling
Model Number: HDMI_to_HDMI_+_SDPIF Added to Inventory on: Friday 01 March, 2013

HDMI Audio Decoder – HDMI Input to HDMI Output + Stereo Audio (3.5mm or Red/White RCA Audio)

The MINI HDMI to HDMI+ Audio Converter increases the analog stereo audio output on the basis of the HDMI signal transmission. The analog stereo audio signal can be easily connected to the earphones or audio power amplifier.

You will need one of the following audio cables/ connectors:

3.5mm Stereo Jack Plug to 2 x RCA Female Adapter - Gold Plated

1.5 Meter Male 3.5mm Jack to 2 x RCA Male Cable - PC Sound card cable

  1. Features
    1. No need to install drivers, portable, flexible, plug and play.
    2. Low power, No power adaptor.
    3. HDMI is compliant with HDMI1.3.
    4. High bandwidth capability support up to 1920x1080@60Hz.
  2. SPECIFICATIONS
    1. Input ports:1xHDMI.
    2. Output ports: 1xHDMI, 1x3.5mmPhoneJack.
    3. Dimensions(mm):60(D)x55(W)x 20(H)
    4. Wight (g):40
  3. PACKAGE CONTENTS
    1. Main unit (HDMI TO HDMI AUDIO Converter )
    2. User Manual.
  4. PANEL DESCRIPTIONS

Please study the panel drawings below and become familiar with the signal input(s), output(s) and power requirements.

       Back Panel:      Top Panel:         Front Panel:

Connection Diagram:

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Related Keywords : audio video adapters, hdmi true matrix splitter, audio cable connectors, hdmi converter, hdmi switcher, hdmi matrix switching, hdmi video matrix split, dvi matrix switch, dvi true matrix switcher, remote hdmi switch, vga hdmi, hdmi input, audio video switch, hdmi connection, digital switch, audio switch, split hdmi signal, hd distribute, hdtv split, hdmi distribute

Price: R449.00 Manufacturer: HDCabling
Model Number: HDMI_to_HDMI_+_Audio_Converter Added to Inventory on: Saturday 24 November, 2012

HDMI Port Saver - Male to Female Adapter - Swiveling Type
Port Savers are the perfect solution for relieving wear and tear on your equipments HDMI ports due to constant plugging and unplugging or when heavy HDMI cables put extra strain on the connectors.

This adapter can swivel smoothly up or down up to 90 degrees from center. Great for directing HDMI cables in a certain direction without bending or twisting the cables. Do cable management in seconds!

Related Keywords : hdmi link male to female, port saver hdmi, male to female hdmi adapter, male to female hdmi converter, extend hdmi, hdmi female to male adapter.
Price: R59.00 Manufacturer: HDCabling
Model Number: Swivel_Type_Port_Saver Added to Inventory on: Tuesday 21 April, 2009

HDMI Port Saver 270 Degree - HDMI Male to Female Adapter
Use a HDMI Port Saver to save your time and efforts in your cable setup! Our 270 Degree HDMI Port Saver (Male to Female) gives you the flexibility you'll need without risking of bending your HDMI cables!

These connectors are also commonly used to protect the port of your display device if you tend to plug / unplug your HDMI cables frequently. The port on the Port Saver will wear out in time because of plugging/unplugging cables but your LCD / Plasma expensive HDMI port will be protected.
Related Keywords : hdmi link, hdmi extend, hdmi extention, hdmi socket, hdmi connect, hdmi female to male coupler, extend hdmi cable, hdmi male to female adapter, hdmi saver port, hdmi bend port
Price: R45.00 Manufacturer: HDCabling
Model Number: 270_Degree_Port_Saver Added to Inventory on: Tuesday 21 April, 2009

HDMI Port Saver 90 Degree - HDMI Male to Female Adapter
Use a HDMI Port Saver to save your time and efforts in your cable setup! Our 90 Degree HDMI Port Saver (Male to Female) gives you the flexibility you'll need without risking of bending your HDMI cables! The 90 degree port savers are ideal for the XBox 360 when plugging / unplugging the Xbox connector and HDMI port to direct the HDMI cable away from the Xbox connector. It can also be used on any other HDMI device.

These connectors are also commonly used to protect the port of your display device if you tend to plug / unplug your HDMI cables frequently. The port on the Port Saver will wear out in time because of plugging/unplugging cables but your LCD / Plasma expensive HDMI port will be protected.
Related Keywords : hdmi link, hdmi extend, hdmi extention, hdmi socket, hdmi connect, hdmi female to male coupler, extend hdmi cable, hdmi male to female adapter, hdmi saver port, hdmi bend port
Price: R45.00 Manufacturer: HDCabling
Model Number: 90_Degree_Port_Saver Added to Inventory on: Wednesday 04 March, 2009

HDMI Port Saver RIGHT ANGLE 270 Degree - HDMI Male to Female Adapter - Vertical Flat Right
Port Savers are the perfect solution for relieving wear and tear on your equipments HDMI ports due to constant plugging and unplugging or when heavy HDMI cables put extra strain on the connectors.

This device is designed to be totally transparent and will have no impact on the audio or video signal. It will transmit all HDMI signals including HDMI v1.3.

If you were to say that the flat side of the connector were the top and the bevelled side were the bottom, this connector would point to the right when connected into a horizontally mounted HDMI port.

If your port is vertically mounted and the flat side is on the left, it would point upward. If the flat side were on the right, it would point downward.

Dimensions: 41mm x 30mm x 1.25mm

Related Keywords : hdmi link, hdmi extend, hdmi extention, hdmi socket, hdmi connect, hdmi female to male coupler, extend hdmi cable, hdmi male to female adapter, hdmi saver port, hdmi bend port
Price: R55.00 Manufacturer: HDCabling
Model Number: HDMI_RA_PS_270 Added to Inventory on: Thursday 18 June, 2009

HDMI Port Saver RIGHT ANGLE 90 Degree - HDMI Male to Female Adapter - Vertical Flat Left
Port Savers are the perfect solution for relieving wear and tear on your equipments HDMI ports due to constant plugging and unplugging or when heavy HDMI cables put extra strain on the connectors.

This device is designed to be totally transparent and will have no impact on the audio or video signal. It will transmit all HDMI signals including HDMI v1.3.

If you were to say that the flat side of the connector were the top and the bevelled side were the bottom, this connector would point to the left when connected into a horizontally mounted HDMI port.

If your port is vertically mounted and the flat side is on the left, it would point downward. If the flat side were on the right, it would point upward.

Dimensions: 41mm x 30mm x 1.25mm

Related Keywords : hdmi link, hdmi extend, hdmi extention, hdmi socket, hdmi connect, hdmi female to male coupler, extend hdmi cable, hdmi male to female adapter, hdmi saver port, hdmi bend port
Price: R55.00 Manufacturer: HDCabling
Model Number: HDMI_RA_PS_90 Added to Inventory on: Thursday 18 June, 2009

HDMI Socket / Coupler - Female to Female (Gold Plated Connectors)
HDMI Coupler for connecting the two male ends of two HDMI cables to have a longer cable.

For longer HDMI Cable lengths beyond 18 meters we recommend that our HDMI Active Equalizer Extender / Repeater - Extend HDMI signal Up to 30 Meters be used in conjunction with these couplers.

This coupler is universal on any HDMI 1.1 to 1.3 cables and will pass the signal on a 1-1 method.

Related Keywords : hdmi link, hdmi extend, hdmi socket, hdmi connect, hdmi female coupler, extend hdmi cable, hdmi female socket
Price: R45.00 Manufacturer: HDCabling
Model Number: HDMI_Coupler_Female_Female Added to Inventory on: Friday 18 December, 2009

HDMI Socket / Coupler Swivel Type (allows 360 Degrees rotation) - Female to Female (Gold Plated Connectors)
HDMI Coupler (Swiveling type to allows 360 degree rotations) for connecting the two male ends of two HDMI cables to have a longer cable.

For longer HDMI Cable lengths beyond 18 meters we recommend that our HDMI Active Equalizer Extender / Repeater - Extend HDMI signal Up to 30 Meters be used in conjunction with these couplers.

This coupler is universal on any HDMI 1.1 to 1.3 cables and will pass the signal on a 1-1 method.

Related Keywords : hdmi link, hdmi extend, hdmi socket, hdmi connect, hdmi female coupler, extend hdmi cable, hdmi female socket
Price: R59.00 Manufacturer:
Model Number: HDMI_Coupler_360_Degree Added to Inventory on: Wednesday 10 February, 2010

HDMI Socket / Coupler Swivel Type (up to 60 degrees bend) - Female to Female (Gold Plated Connectors)
HDMI Coupler (Swiveling type to allow 60 degree bends) for connecting the two male ends of two HDMI cables to have a longer cable.

For longer HDMI Cable lengths beyond 18 meters we recommend that our HDMI Active Equalizer Extender / Repeater - Extend HDMI signal Up to 30 Meters be used in conjunction with these couplers.

This coupler is universal on any HDMI 1.1 to 1.3 cables and will pass the signal on a 1-1 method.

Related Keywords : hdmi link, hdmi extend, hdmi socket, hdmi connect, hdmi female coupler, extend hdmi cable, hdmi female socket
Price: R55.00 Manufacturer: HDCabling
Model Number: HDMI_Socket_Swivel_Type_Couple Added to Inventory on: Wednesday 18 February, 2009

Male Active Displayport to VGA Female Adapter (Used on some Dell Notebooks and other Displayport devices)
DisplayPort is a new digital video and audio connection standard designed by the Video Electronics Standards Association (VESA). It is a royalty-free technology designed primarily for the computer industry but also compatible for home theater application. The format supports both digital video and audio using a single cable.

Here's a simple solution for connecting your DisplayPort equipment devices using VGA cables to your existing VGA Display. This simple adapter is all you need to convert from one format to the other.

- Max Supported Resolution - 1920x1080p, 1920x1200
- 5.4 Gbps Bandwidth input over 2 lanes Integrated triple 10-bit, 162MHz Video DAC for Analog VGA signal Output

DisplayPort was primarily designed as a replacement for VGA, DVI and LVDS which are common interfaces used in the computer / IT industries, while HDMI was developed by the Consumer Electronics Industry specifically for Home Theater applications. Toward this end, DisplayPort has certain enhanced features such as direct drive monitor design and single cable multi-function monitor connectivity. Some advantages of HDMI are the ability to support xvYCC color, Dolby TrueHD and CEC (Consumer Electronics Control) signals.

Though both share powerfull A/V features, DisplayPort was designed to complement HDMI, not to replace it.
Related Keywords : hdmi to display port adapter, display port to hdmi converter, displayport to hdmi gadget, displayport male to female hdmi converter, female hdmi to male displayport adapter, hdmi to displayport to hdmi.
Price: R249.00 Manufacturer: HDCabling
Model Number: Displayport_to_VGA_Converter Added to Inventory on: Tuesday 11 August, 2009

Male Active Displayport to VGA Female Cable (ATI Eyefinity Tested, works on all Displayport devices)
This cable has been tested with ATI EYEFinity and allows up to 6 screens to be configured on ATI Graphics cards having the Eyefinity capability to display one image across multiple displays.

DisplayPort is a new digital video and audio connection standard designed by the Video Electronics Standards Association (VESA). It is a royalty-free technology designed primarily for the computer industry but also compatible for home theater application. The format supports both digital video and audio using a single cable.

Here's a simple solution for connecting your DisplayPort equipment devices using VGA cables to your existing VGA Display. This simple adapter is all you need to convert from one format to the other.

- Max Supported Resolution - 1920x1080p, 1920x1200
- 5.4 Gbps Bandwidth input over 2 lanes Integrated triple 10-bit, 162MHz Video DAC for Analog VGA signal Output

DisplayPort was primarily designed as a replacement for VGA, DVI and LVDS which are common interfaces used in the computer / IT industries, while HDMI was developed by the Consumer Electronics Industry specifically for Home Theater applications. Toward this end, DisplayPort has certain enhanced features such as direct drive monitor design and single cable multi-function monitor connectivity. Some advantages of HDMI are the ability to support xvYCC color, Dolby TrueHD and CEC (Consumer Electronics Control) signals.

Though both share powerfull A/V features, DisplayPort was designed to complement HDMI, not to replace it.
Related Keywords : hdmi to display port adapter, display port to hdmi converter, displayport to hdmi gadget, displayport male to female hdmi converter, female hdmi to male displayport adapter, hdmi to displayport to hdmi.
Price: R259.00 Manufacturer: HDCabling
Model Number: Active_DP_to_VGA_Cable Added to Inventory on: Tuesday 05 July, 2011

Male DisplayPort to mini Displayport Female Adapter Cable
Displayport is found on several graphics cards and displays. DisplayPort is a digital display interface developed by the Video Electronics Standards Association (VESA).

Length : 15cm
Converts : Displayport to mini-Displayport female to allow connection of a mini-displayport male cable fixed to some Macbook screens to the Standard Displayport device.
Price: R119.00 Manufacturer: HDCabling
Model Number: DP_to_miniDP_Female Added to Inventory on: Wednesday 30 November, 2011

Male Dual Link DVI-A (DVI-I Port) to VGA-HD15 Female Adapter (Gold Plated)
Use this adapter to change your DVI-I connector to a regular VGA connector or to change VGA to DVI-A (For devices which can accept an analog DVI input using a DVI-I Connector).

Some video cards have a dual display capability. Use this adapter to allow dual display. You CANNOT use this adapter with a HDMI to DVI-D adapter to convert HDMI to VGA or visa versa since it is a digital to analog conversion and a powered converter must be used in this case such as the HDFURY / HDFURY2 or generic HDMI / DVI to VGA converter.

There are two types of DVI Connectors: DVI Analog and DVI Digital. If your DVI is digital, this DVI Adaptor will NOT work. Please check your DVI Pins carefully whether this DVI adaptor will fit in. See diagram below for the different types of DVI Connectors. This adapter uses a DVI-I Connector and the input / output pins of your devices should be the same as in the highlighted picture below.

DVI-D, DVI-I, DVI-A Connectors Difference

For example, if you have a ATI Radeon or Nvidia Dual Monitor PC graphics card, you can use this adapter to change one of your DVI connectors to a VGA connector to enable your Dual Monitor capability if the graphics card supports DVI-I output. It cannot be used on DVI-D only graphics cards.

Related Keywords : convert dvi to vga, convert vga to dvi, dvi converter, vga converter, convert dvi-i to vga, convert dvi-a to vga, convert vga to dvi-a, convert vga to dvi-i, graphics card to vga, PC graphics card to dvi
Price: R35.00 Manufacturer: HDCabling
Model Number: VGA_to_DVI_Dual_Link Added to Inventory on: Tuesday 03 February, 2009

Male HDMI (Type A) to Female mini-HDMI (Type C) Adapter
Use this adapter on any standard mini-HDMI to mini-HDMI Male to Male Cable (Type C to Type C HDMI) to convert the one side of the HDMI cable to Standard HDMI (Type A HDMI).
Price: R49.00 Manufacturer: HDCabling
Model Number: MHD_mini_FHD Added to Inventory on: Wednesday 25 January, 2012

Male M1-D (P&D) to DVI-D Dual Link Female Adapter (Gold Plated)
M1 connectors are digital and similar to DVI-D connectors, but differ in size and pin configuration. They are commonly used on the devices below.

- Infocus : 4805, 5000, 5700, 7205, 7210, X2, X3, LP335, LP340, LP350, LP530, LP925, LP530, LP70+,LP120, LP130, LP820, LP840
- Boxlight CD-600m, CD-750m, XD-10m
- IBM iLM300 projector 1m
- DUKANE ImagePro 8747 proj 1m
- TOSHIBA TDP-S2 S2V proj 1m
- Dell 3200mp, 3300mp, 3400mp, 4100mp
- Compatible with other M1 port projectors and devices

This adapter converts M1-D (P&D) to DVI-D Dual Link Female. This adapter connects your projector M1 DVI connection to regular DVI cable. To have a M1 Male connector to M1 Male connector use 2 of these adapters on each end of a standard Male DVI-D Dual link to Male DVI-D Dual Link cable.

Price: R79.00 Manufacturer:
Model Number: M1_Male_to_DVI_D_Female Added to Inventory on: Friday 12 March, 2010

Male Mini Displayport (Thunderbolt) to DVI-D, HDMI or Displayport Female Adapter (Used by most Apple Mac's & ATI Graphics cards)
This is a cost effective solution for adapting your new Mini-DisplayPort equipped Mac laptop or any other source / player using the mini-Displayport interface to your current DVI-D, HDMI or Displayport display.

Mostly used on ATi HD5970 , HD5850x2 , HD5870x2 / Apple new notebooks - MacBook, MacBook Pro, MacBook Air, iMac, Powerbook G4.

Mini-DisplayPort is a miniaturized version of DisplayPort, the newest digital display interface developed by the Video Electronics Standards Association (VESA). We have a collection of Mini-DP adapters that will allow you to connect your new laptop to the widely used current standards of VGA, DVI or HDMI. Please note when using this adapter that only 1 output port can be active / connected at a time to a display.

Max Supported Resolution - 1920x1080p, 12-bits / channel, or 12*3 = 36bits on all channels.

*NOTE* ATI Eyefinity: You will need an active mini-displayport adapter which is USB powered for ATI Eyefinity Graphics cards since this passive / cable adapter will not work for ATI Eyefinity. It works with any mini-displayport Macbook and ATI cards with mini-DP that is not Eyefinity enabled and any device that can send a HDMI signal via the mini-Displayport port.

*NOTE* AUDIO: This adapter will support audio only on HDMI or DP output if your source device allows audio output through the Mini DisplayPorts interface. If you're not sure, please check with the manufacturer or website, to confirm if your device allows audio out through the Mini-DP interface.
Related Keywords : mini display port to hdmi, hdmi to mini-displayport, mini displayport converter to hdmi, mini displayport adapter to hdmi
Price: R329.00 Manufacturer: HDCabling
Model Number: mini_DP_to_HDMI_DVI_DP Added to Inventory on: Tuesday 10 August, 2010

Male Mini Displayport (Thunderbolt) to HDMI Female Adapter (Aluminium Unibody Macbook Pro, ATI Graphics cards and other mini-DP devices)
This is a cost effective solution for adapting your new Mini-DisplayPort equipped laptop or any other source / player using the mini-Displayport interface to your current HDMI display.

Mostly used on ATi HD5970 , HD5850x2 , HD5870x2 / Apple new notebooks - MacBook, MacBook Pro, MacBook Air, iMac, Powerbook G4.

Mini-DisplayPort is a miniaturized version of DisplayPort, the newest digital display interface developed by the Video Electronics Standards Association (VESA). We have a collection of Mini-DP adapters that will allow you to connect your new laptop to the widely used current standards of VGA, DVI or HDMI.

This is a connector cable to convert from Mini-Displayport to HDMI Female. To connect to a DVI screen from the HDMI Female use a Male HDMI to Male DVI cable at 1.8 Meter - HDMI to DVI Cable HDMI 1.3 28AWG. To connect to any HDMI Screen use any length HDMI cable (From 1 to 15 Meter) listed at HDMI Cables.

Max Supported Resolution - 1920x1080p, 12-bits / channel, or 12*3 = 36bits on all channels.

*NOTE* ATI Eyefinity: You will need an active mini-displayport adapter which is USB powered for ATI Eyefinity Graphics cards since this passive / cable adapter will not work for ATI Eyefinity. It works with any mini-displayport Macbook and ATI cards with mini-DP that is not Eyefinity enabled and any device that can send a HDMI signal via the mini-Displayport port.

*NOTE* AUDIO: This adapter will support audio only if your source device allows audio output through the Mini DisplayPorts interface. If you're not sure, please check with the manufacturer or website, to confirm if your device allows audio out through the Mini-DP interface.
Related Keywords : mini display port to hdmi, hdmi to mini-displayport, mini displayport converter to hdmi, mini displayport adapter to hdmi
Price: R139.00 Manufacturer: HDCabling
Model Number: mini_DP_to_HDMI_Converter Added to Inventory on: Tuesday 21 April, 2009

Male Mini Displayport (Thunderbolt) to Standard Displayport Female Adapter (Aluminium Unibody Macbook Pro and other mini-DP devices)
This is a cost effective solution for adapting your Mini-DisplayPort equipped laptop or any other source / player using the mini-Displayport interface to your current standard Displayport display (Some Dell displays use the Displayport interface).

Mini-DisplayPort is a miniaturized version of DisplayPort, the newest digital display interface developed by the Video Electronics Standards Association (VESA). We have a collection of Mini-DP adapters that will allow you to connect your mini-Displayport laptop to the widely used current standards of VGA, DVI, HDMI or Displayport.

This adapter will convert from Mini-Displayport to Standard Displayport. To connect to a Displayport screen from the Female Standard Displayport side of the converter use a Male Displayport to Male Displayport cable at 1.8 Meter Male Displayport to Male Displayport Cable.

Max Supported Resolution - 1920x1080p, 12-bits / channel, or 12*3 = 36bits on all channels.

*NOTE* AUDIO: This adapter will support audio only if your source device allows audio output through the Mini DisplayPorts interface. If you're not sure, please check with the manufacturer or website, to confirm if your device allows audio out through the Mini-DP interface.
Related Keywords : mini display port to hdmi, hdmi to mini-displayport, mini displayport converter to hdmi, mini displayport adapter to hdmi
Price: R89.00 Manufacturer: HDCabling
Model Number: mini_DP_to_Standard_DP_Convert Added to Inventory on: Wednesday 04 November, 2009

Male Mini Displayport (Thunderbolt) to VGA (D-Sub / HD15) Female Adapter (Aluminium Unibody Macbook Pro, ATI Graphics cards and other mini-DP devices)
This is a cost effective solution for adapting your new Mini-DisplayPort equipped laptop or any other source / player using the mini-Displayport interface to your current VGA display. Use any length Male to Male VGA cable to connect from the converter to your display or use your display's existing VGA Male cable to plug into the converter.

Mostly used on ATi HD5970 , HD5850x2 , HD5870x2 / Apple new notebooks - MacBook, MacBook Pro, MacBook Air, iMac, Powerbook G4.

Mini-DisplayPort is a miniaturized version of DisplayPort, the newest digital display interface developed by the Video Electronics Standards Association (VESA). We have a collection of Mini-DP adapters that will allow you to connect your new laptop to the widely used current standards of VGA, DVI or HDMI.

Max Supported Resolution - 1920x1080

*NOTE* ATI Eyefinity: You will need an active mini-displayport adapter which is USB powered for ATI Eyefinity Graphics cards since this passive / cable adapter will not work for ATI Eyefinity. It works with any mini-displayport Macbook and ATI cards with mini-DP that is not Eyefinity enabled and any device with a mini-displayport output.

*NOTE* AUDIO: This adapter will not support audio since the VGA / RGBHV signal does not have the capability to transmit audio.
Related Keywords : mini display port to hdmi, hdmi to mini-displayport, mini displayport converter to hdmi, mini displayport adapter to hdmi
Price: R259.00 Manufacturer: HDCabling
Model Number: mini_DP_to_VGA_Converter Added to Inventory on: Friday 23 April, 2010

Male Mini Displayport to DVI Female Adapter (Aluminium Unibody Macbook Pro and other mini-DP devices)
This is a cost effective solution for adapting your new Mini-DisplayPort equipped laptop or any other source / player using the mini-Displayport interface to your current DVI display.

Mini-DisplayPort is a miniaturized version of DisplayPort, the digital display interface developed by the Video Electronics Standards Association (VESA).

Supports up to 1920x1200 resolutions (single link).

This is a connector cable to convert from Mini-Displayport to DVI Female. To connect to a DVI screen from the DVI Female use a male DVI to male DVI cable at 2 Meter Male DVI to DVI Male Dual Link Cable. To connect to a HDMI screen from the Female DVI port use a Male DVI to Male HDMI cable at 1.8 Meter - HDMI to DVI Cable HDMI 1.3 28AWG - (Gold Plated) .

NOTE: This adapter does NOT support an analog signal. It will only output a digital signal. It can be used with DVI to DVI and DVI to HDMI cables and adapters, but NOT DVI to VGA.

*NOTE* AUDIO: This adapter will NOT support audio since the DVI standard does not allow audio to be transmitted.
Related Keywords : mini display port to dvi, dvi to mini-displayport, mini displayport converter to dvi, mini displayport adapter to dvi
Price: R289.00 Manufacturer: HDCabling
Model Number: mini_DP_to_DVI_Converter Added to Inventory on: Thursday 18 June, 2009

Male mini-HDMI to HDMI Female Adapter (Type C Male to Type A Female adapter)
Use this adapter on any standard HDMI to HDMI Male to Male Cable (Type A to Type A HDMI) to convert the one side of the HDMI cable to mini-HDMI (Type C HDMI)
Price: R49.00 Manufacturer: HDCabling
Model Number: mini_HDMI_to_HDMI_Adapt Added to Inventory on: Thursday 21 July, 2011

Male Passive Displayport to HDMI Female Adapter (HP & Dell Notebooks, ATI and Nvidia Graphics cards etc)
DisplayPort is a new digital video and audio connection standard designed by the Video Electronics Standards Association (VESA). It is a royalty-free technology designed primarily for the computer industry but also compatible for home theater application. The format supports both digital video and audio using a single cable.

Here's a simple solution for connecting your DisplayPort equipment devices using HDMI cables to your exisiting HDMI devices. This simple adapter is all you need to convert from one format to the other.

Using the DisplayPort to HDMI adapter, you can transmit audio if your graphics card support audio output through the DisplayPort connector. Using this adapter with an HDMI to DVI cable to connect to a DVI display it will only transmit video.

Note!! This is a passive adapter. While DisplayPort connectors are capable of passing an HDMI signal, DisplayPort and HDMI signals are basically different and not compatible with each other. This adapter does not actively convert a DisplayPort signal into an HDMI signal. In order for this adapter to function properly, you must have a DisplayPort source device capable of producing and passing out an HMDI signal through the DisplayPort jack.

DisplayPort was primarily designed as a replacement for VGA, DVI and LVDS which are common interfaces used in the computer / IT industries, while HDMI was developed by the Consumer Electronics Industry specifically for Home Theater applications. Toward this end, DisplayPort has certain enhanced features such as direct drive monitor design and single cable multi-function monitor connectivity. Some advantages of HDMI are the ability to support xvYCC color, Dolby TrueHD and CEC (Consumer Electronics Control) signals.

*NOTE* ATI Eyefinity: You will need an active displayport adapter which is USB powered for ATI Eyefinity Graphics cards since this passive / cable adapter will not work for ATI Eyefinity. It works with any displayport Macbook and ATI / Nvidia cards with a displayport that is not Eyefinity enabled and any device that can send a HDMI signal via the mini-Displayport port.

Though both share powerfull A/V features, DisplayPort was designed to complement HDMI, not to replace it. Related Keywords : hdmi to display port adapter, display port to hdmi converter, displayport to hdmi gadget, displayport male to female hdmi converter, female hdmi to male displayport adapter, hdmi to displayport to hdmi.
Price: R149.00 Manufacturer: HDCabling
Model Number: Displayport_to_HDMI_Converter Added to Inventory on: Tuesday 21 April, 2009

Mini DisplayPort Coupler Cable (Gender changer)
This cable will change a mini-displayport male cable to a female mini-displayport connector.

Mini-Displayport is found on most Apple Macbook's after 2008 e.g Unibody Mac and some other devices. Mini DisplayPort is a miniaturized version of DisplayPort, a digital display interface developed by the Video Electronics Standards Association (VESA).

Most cables from a mac display cannot be disconnect from the display and has a male mini-Displayport at the end of the cable. Use this coupler cable to convert the male end of the cable to a female mini-DP port to allow plugging of a male mini-DP cable to the other end of the cable.

This Mini Displayport coupler will allow you to connect the male ends of two Mini Displayport cables in order to make one longer cable. This is a straight type coupler cable that will work great for most standard applications. Do not exceed the recommended distance of 5m on mini-DP cables to ensure maximum resolutions can be achieved.
Price: R95.00 Manufacturer: HDCabling
Model Number: miniDP_coupler_cable Added to Inventory on: Wednesday 30 November, 2011

Mini-DVI to DVI Adapter / Cable (Macbook Pro / PowerBook 9007/9008)
The Mini-DVI connector is used on Apple computers as a digital / analog alternative to the Mini-VGA connector. Its size is between the full-sized DVI and the tiny Micro-DVI. It is found on the 12-inch PowerBook G4, Intel-based iMac, the MacBook Intel-based laptop, and the Intel-based Xserve. Mini-DVI connectors on Apple hardware are capable of carrying DVI, VGA, or TV signals through the use of adapters, detected with EDID (Extended display identification data) via DDC. This connector is often used in place of a DVI connector in order to save physical space on devices. Mini-DVI does not support dual-link connections and hence cannot support resolutions higher than 1920x1200 @60Hz.

Note!! 2009 and newer Unibody Macbook Pro laptops uses mini-Displayport ports. Type "mini Displayport" without the quotes in the Quick Find box on the left to find the correct cable if your Macbook uses mini-Displayport and not mini-DVI. Check the laptop manual to verify which is the correct cable to purchase.

The physical connector is similar to Mini-VGA, but is differentiated by having four rows of pins arranged in two vertically-stacked slots rather than the two rows of pins in the Mini-VGA.

This is a connector cable to convert from Mini-DVI to DVI Female. To connect to a DVI screen from the DVI Female use a male DVI to male DVI cable at 2 Meter Male DVI to DVI Male Dual Link Cable. To connect to a HDMI screen from the Female DVI port use a Male DVI to Male HDMI cable at 1.8 Meter - HDMI to DVI Cable HDMI 1.3 28AWG - (Gold Plated) .

Related keywords : mini dvi to hdmi, mini dvi to vga, mini dvi to normal dvi, vga from mac, vga from dvi on apple notebook, mini-dvi to vga, mini-dvi to hd15, connect mac to vga screen, apple dvi cable, apple mini dvi cable, mini dvi to dvi female
Price: R109.00 Manufacturer: HDCabling
Model Number: DVI_to_mini_DVI_Cable Added to Inventory on: Tuesday 09 December, 2008

Mini-DVI to HDMI Adapter / Cable (Macbook Pro / PowerBook 9007/9008)
The Mini-DVI connector is used on Apple computers as a digital / analog alternative to the Mini-VGA connector. Its size is between the full-sized DVI and the tiny Micro-DVI. It is found on the 12-inch PowerBook G4, Intel-based iMac, the MacBook Intel-based laptop, and the Intel-based Xserve. Mini-DVI connectors on Apple hardware are capable of carrying DVI (or HDMI video), VGA, or TV signals through the use of adapters, detected with EDID (Extended display identification data) via DDC. This connector is often used in place of a DVI connector in order to save physical space on devices. Mini-DVI does not support dual-link connections and hence cannot support resolutions higher than 1920x1200 @60Hz.

Note!! 2009 and newer Unibody Macbook Pro laptops uses mini-Displayport ports. Type "mini Displayport" without the quotes in the Quick Find box on the left to find the correct cable if your Macbook uses mini-Displayport and not mini-DVI. Check the laptop manual to verify which is the correct cable to purchase.

The physical connector is similar to Mini-VGA, but is differentiated by having four rows of pins arranged in two vertically-stacked slots rather than the two rows of pins in the Mini-VGA.

This is a connector cable to convert from Mini-DVI to HDMI Female. To connect to a HDMI screen from the HDMI Female use any length male HDMI to male HDMI Cable cable.

Related keywords : mini dvi to hdmi, mini dvi to vga, mini dvi to normal dvi, vga from mac, vga from dvi on apple notebook, mini-dvi to vga, mini-dvi to hd15, connect mac to vga screen, apple dvi cable, apple mini dvi cable, mini dvi to dvi female
Price: R99.00 Manufacturer: HDCabling
Model Number: HDMI_to_mini_DVI_Cable Added to Inventory on: Friday 25 September, 2009

Mini-DVI to VGA Adapter / Cable (Macbook Pro / PowerBook 9007/9008)
The Mini-DVI connector is used on Apple computers as a digital / analog alternative to the Mini-VGA connector. Its size is between the full-sized DVI and the tiny Micro-DVI. It is found on the 12-inch PowerBook G4, Intel-based iMac, the MacBook Intel-based laptop, and the Intel-based Xserve. Mini-DVI connectors on Apple hardware are capable of carrying DVI, VGA, or TV signals through the use of adapters, detected with EDID (Extended display identification data) via DDC. This connector is often used in place of a DVI connector in order to save physical space on devices. Mini-DVI does not support dual-link connections and hence cannot support resolutions higher than 1920x1200 @60Hz.

Note!! 2009 and newer Unibody Macbook Pro laptops uses mini-Displayport ports. Type "mini Displayport" without the quotes in the Quick Find box on the left to find the correct cable if your Macbook uses mini-Displayport and not mini-DVI. Check the laptop manual to verify which is the correct cable to purchase.

The physical connector is similar to Mini-VGA, but is differentiated by having four rows of pins arranged in two vertically-stacked slots rather than the two rows of pins in the Mini-VGA.

This is a connector cable to convert from Mini-DVI to VGA Female (Also called D-Sub, HD15 or RGBHV). To connect to a VGA screen from the VGA Female use any length Male VGA to Male VGA cable at VGA Cables Section.

Related keywords : mini dvi to hdmi, mini dvi to vga, vga from mac, vga from dvi on apple notebook, mini-dvi to vga, mini-dvi to hd15, connect mac to vga screen, apple dvi cable, apple mini dvi cable.
Price: R99.00 Manufacturer: HDCabling
Model Number: VGA_to_mini_DVI_Cable Added to Inventory on: Tuesday 09 December, 2008

Rotatable Bend Female HDMI Type A (Standard HDMI) to Male mini-HDMI (Type C) - Port Saver adapter
Port Savers are the perfect solution for relieving wear and tear on your equipments HDMI ports due to constant plugging and unplugging or when heavy HDMI cables put extra strain on the connectors.

The rotatable bend connector will ensure you can connect any standard HDMI cable to a device with a mini-HDMI (Type C) port (please check orientation of port on device to ensure connector orientation points to the disired direction needed rotatable up to 180 degrees).

You can also use this adapter to convert any length standard HDMI to HDMI cable (Type A) to a HDMI to mini-HDMI cable (Type A to Type C Cable)

Price: R59.00 Manufacturer: HDCabling
Model Number: F-HDMI_to_m_Mini_HDMI Added to Inventory on: Sunday 08 July, 2012

SDI to HDMI Video Converter device
HTML Online Editor Sample

The SDI to HDMI Video Converter device is designed to convert SDI or HD-SDI signals to HDMI for driving HDMI monitors. This unit also supports embedded SD/HD-SDI audio in the HDMI output, allowing for a convenient single-cable, audio-video connection.

 

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Related Keywords : audio video adapters, hdmi true matrix splitter, audio cable connectors, hdmi converter, hdmi switcher, hdmi matrix switching, hdmi video matrix split, dvi matrix switch, dvi true matrix switcher, remote hdmi switch, vga hdmi, hdmi input, audio video switch, hdmi connection, digital switch, audio switch, split hdmi signal, hd distribute, hdtv split, hdmi distribute

Price: R1,799.00 Manufacturer: HDCabling
Model Number: SDI_to_HDMI Added to Inventory on: Saturday 24 November, 2012

Video Splitter - Male DVI-I to VGA / HD15 Female X 2 (1 PC to 2 Monitors - Gold Plated)
This splitter cable is for splitting 1 x DVI-A signal to 2 x VGA signals from a PC or laptop and graphics card with DVI-I (Switchable to DVI-A) output. Most Nvidia and ATI graphics card supports DVI-I autoswitch between DVI-D and DVI-A.

Connector : DVI-I Male to (2) HD15 / VGA Female
Length : 21 cm

(*) This is splitter cable. You can only connect one input device (i.e. DVD player,cable box or satellite receiver,PC, Laptop) to two output device(i.e. TV,LCD,Plasma or projector).You can't connect two input device (i.e. DVD player,cable box or satellite receiver) to one output device(i.e. TV or projector)

(**)This DVI connector is DVI-A (Fits onto DVI-I output on graphics card). DVI-D connector is not compatible with this splitter. Please check your device before buying.

Related Keywords : DVI to VGA splitter cable, Split DVI PC signal to multiple VGA monitors, DVI-A to VGA cable, DVI cable splitter to VGA.
Price: R89.00 Manufacturer: HDCabling
Model Number: DVI_to_VGA_2X_Splitter_Cable Added to Inventory on: Tuesday 21 April, 2009

Video Splitter / Selector - Male HDMI to HDMI Female X 2 (Gold Plated)
This splitter cable is for splitting 1 HDMI signal to 2 HDMI signals.

Connector : HDMI Male to (2) HDMI Female
Length : 30 cm

(*) You can only connect one input device - Non-HDCP (i.e. Apple TV Cable box, Satellite receiver) to two output devices(One signal to LCD / Plasma and one signal to another display e.g HDMI Projector/LCD or any HDMI display).

You cannot connect two input devices (i.e. HD PVR and DVD player) to one output device(i.e. TV or projector). For this you will need an HDMI switch - 5 X 1 Enhanced HDMI Switch with built-in Equalizer and Remote Control

Please note that some LCD's / Plasma's will consider a split of the signal to be a copyright violation on HDCP Content, so it may decide that only one display should show at a time or may block the content entirely or drop the signal quality to 480p. This type of situation is considered to be a device compatibility issue and may be fixed by using a firmware update by the individual device manufacturers. For HDCP devices / Players use a powered splitter as recommended below.

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON. The sequence below should be followed when installing new cables or equipment between source/player and LCD / Plasma.

1.) Power-off all equipment (At the wall socket).
2.) Connect all Cables, Splitters, Switches, Extenders within HDMI Distribution Network.
3.) Power on all Splitters, Switches, Extenders within HDMI Distribution Network.
4.) Power on all LCD / Plasma's and set to HDMI input from HDMI Distribution Network.
5.) Power on Sources / Players (Sources negotiates HDCP Handshake via HDMI Network to displays which is set to HDMI input to respond to handshake).

We recommend the setup below for incompatible devices with cable splitters and to strengthen the HDMI signal after it has been split (We have tested cables lengths on our HDMI 24 AWG rated cables up to 10 meters at various resolutions up to 1080i and 100% quality. 24 AWG HDMI and lower rated cables will reach longer lengths when using an HDMI Active Equalizer / Extender. Please note that even with this proposed diagram below some systems will use this splitter as a selector for HDCP content and will select to view the HDMI content on the first HDTV that is powered on and establishes a handshake. If one display is powered off the other display will show the content and vice versa, but this is dependant on the displays in use and results may differ. This will not be the case with non-HDCP content and both displays will view the required video / audio.

HDMI Cable Splitter Wiring Diagram
This diagram and connections above are also 100% tested for HDMI to DVI Cables. Since DVI only transmits video and no audio, both ends of the HDMI Cable splitter will only display video when a HDMI to DVI converter or cable is used.

For devices incompatible with passive splitters (cable splitters) and HDCP devices, we recommend our active powered switch / splitter (All-in-one solutions) - 4 X 2 True Matrix HDMI 1.3a Powered Switch / Splitter with Remote Controller , HDMI Powered Splitter 1 x 2, HDMI Powered Splitter 1 x 4 and HDMI Powered Splitter 1 x 8. Related Keywords : audio video adapters, hdmi cable splitter, audio cable connectors, split hdmi, hdmi converter, hdmi splitter, hdmi connection, hdmi splitter cable
Price: R139.00 Manufacturer: HDCabling
Model Number: HDMI_Cable_Splitter_Selector Added to Inventory on: Tuesday 12 August, 2008

1x4 HDMI Splitter over Single or Dual CAT6e STP including 4 x receivers (up to 60 Meter)
This set includes 1 x Transmitter unit with 1 x HDMI input and 8 x CAT6e outputs to connect to 4 x CAT6e HDMI Receivers (Included in package, 1 receiver has 2 x RJ45, One for TMDS, one for DDC HDMI Channel) Tested 100% with all common HDMI sources such as HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

HDMI carries 2 channels : TMDS (Video/Audio & sync information) / CAT5e-1 Port on HDMI Extender and DDC (5 volt, HDCP information) / CAT5e-2 Port on HDMI Extender. More info at HDMI Signal Explained. Due to 100% stability needed on the TMDS / CAT5e-1 port channel for sync information CAT5e or CAT6 Shielded Twisted Pair (STP) is required to ensure no sync losses occur. CAT5e / STP UTP can be used for the DDC / CAT5e-2 port channel, but not recommended at all for HDMI Equipment and STP should be used for a stable installation. Basically you have one cable that is highly critical for video integrity and timing where the opposite cable is not as frequency-dependent, handling only the EDID, HDCP, power, hot plug and ground.

CAT5e Shielded Twisted Pair Cables at CAT5e Shielded Twisted Pair (STP) 350Mhz ISA/IEC 11801 Cable, CAT7 SSTP Cables at CAT7 SSTP Full Copper Ethernet Cable up to 10Gb/s. CAT5e FTP / STP depending on quality of cable (Full Copper cables) can be installed for resolutions up to 1080p depending on color depth, refresh rates & equipment signal quality, but only recommended up to 720p/1080i. For 1080p transmissions full copper CAT6e FTP / STP or CAT7 SSTP are required.

Please ensure cables are terminated according to 568A or 568B standard as in diagram below depending on CAT5e / CAT6 STP cable type and properly grounded via the ripcord wire inside STP cables. Grounding the cable will also ensure better protection against voltage spikes. STP cables shields better against nearby EMI.

STP or UTP 568B Termination/Crimping Standard

HDMI devices (any source / player, LCD, Plasma etc) have different results when inserting HDMI Repeater devices depending on the equipment you are using (a repeater device is any switch / splitter / extender etc). Compatibility cannot be always guaranteed due to some suppliers using revoked HDCP keys. This is normally seen on older HDTV's and occurs on < 5% of installations. Please ensure to get confirmation from the manufacturer of your source / player / LCD that the specific player or LCD can communicate via a HDMI Repeater (Any switch, digital receiver, amplifier, extender, splitter etc). Some source devices might not allow any HDMI device between itself and the LCD and will only function via a direct HDMI cable to the LCD. Your display or source manufacturer can confirm if their product supports the functions required.

Features :

● CAT5e / CAT6 cabling can fit into smaller areas than HDMI because of the head size of the HDMI cable (From 16 to 19mm) compared to 4-5mm for CAT5e / CAT6 STP Cables.
● One HDMI input signal can be distributed and extended to four HD Displays. Distances up to 60 meter is possible.
● Support 3D
● Support video output : 24/50/60fps / 1080p / 1080i / 720p / 576p / 576i /480p /480i
● Audio format support : DTS-HD / Dolby-trueHD / LPCM7.1 / DTS / Dolby-AC3 / DSD
● Support signal retiming
● No loss of quality
● Installs in minutes

No HDMI / CAT-5e / CAT-6 / CAT-7 cables are included with this product and must be purchased separately.

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Price: R3,999.00 Manufacturer: HDCabling
Model Number: 1x4HDMI_over_CAT6 Added to Inventory on: Friday 05 August, 2011

2D or 3D 2-Way (1x2) HDMI Splitter over CAT6e (HDMI Extender) with IR Extender using single or double CAT6e (50m 1080p / 100m 720p-1080i) - HDCP 1.2
This HDMI Splitter with IR Extender over CAT6e are wired 1-2 and 2-1 on installation e.g CAT6e-1 on TX unit to CAT6e-2 on RX port. Using a single CAT6e cable signal can be transmitted up to 30m using 1080p with no IR and 3D. 3D and IR functionality required a 2nd CAT6e Cable to be used with extender and TX unit to be powered from external power supply included.

Tested 100% with all common HDMI sources such as HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

HDMI carries 2 channels : TMDS (Video/Audio & sync information) / CAT5e-1 Port on HDMI Extender and DDC (5 volt, HDCP information) / CAT5e-2 Port on HDMI Extender. More info at HDMI Signal Explained. Due to 100% stability needed on the TMDS / CAT5e-1 port channel for sync information CAT5e or CAT6 Shielded Twisted Pair (STP) is required to ensure no sync losses occur. CAT5e / STP UTP can be used for the DDC / CAT5e-2 port channel, but not recommended at all for HDMI Equipment and STP should be used for a stable installation. CAT5e Shielded Twisted Pair Cables at CAT5e Shielded Twisted Pair (STP) 350Mhz ISA/IEC 11801 Cable, CAT7 SSTP Cables at CAT7 SSTP Full Copper Ethernet Cable up to 10Gb/s. CAT5e FTP / STP depending on quality of cable (Full Copper cables) can be installed for resolutions up to 1080p depending on color depth, refresh rates & equipment signal quality, but only recommended up to 720p/1080i. For 1080p transmissions full copper CAT6e FTP / STP or CAT7 SSTP are required.

Please ensure cables are terminated according to 568A or 568B standard as in diagram below depending on CAT5e / CAT6 STP cable type and properly grounded via the ripcord wire inside STP cables. Grounding the cable will also ensure better protection against voltage spikes. STP cables shields better against nearby EMI.

STP or UTP 568B Termination/Crimping Standard

HDMI devices (any source / player, LCD, Plasma etc) have different results when inserting HDMI Repeater devices depending on the equipment you are using (a repeater device is any switch / splitter / extender etc). Compatibility cannot be always guaranteed due to some suppliers using revoked HDCP keys. This is normally seen on older HDTV's and occurs on < 5% of installations. Please ensure to get confirmation from the manufacturer of your source / player / LCD that the specific player or LCD can communicate via a HDMI Repeater (Any switch, digital receiver, amplifier, extender, splitter etc). Some source devices might not allow any HDMI device between itself and the LCD and will only function via a direct HDMI cable to the LCD. Your display or source manufacturer can confirm if their product supports the functions required.

Features :

● CAT5e / CAT6 cabling can fit into smaller areas than HDMI because of the head size of the HDMI cable (From 16 to 19mm) compared to 4-5mm for CAT5e / CAT6 STP Cables.
● One Sender & One Receiver module included.
● 3D Support
● IR Return Functionality to control remote sources via IR Remote.
● This extender set has an IR link functionality enabling you to control any IR device via it's own remote from the far end display back to the Extender set transmitter side near source device.
● Uses CAT5e / CAT6 Shielded Twisted Pair to substitute HDMI cable to achieve long distance transmissions. .
● Follow the standard of IEEE-568B when installing and terminating UTP / STP Cables to ensure minimum signal loss over longer distances.
● Transmission distance reaches up to 60 meters (1080P) and 100 meter 1080i / 720p. Transmission distance may vary on type of equipment used, quality of CAT5e / CAT6 cables used, quality of RJ45 shielded connectors and crimping quality of installation of RJ45 connectors.<.
● Auto-adjustment of feedback, equalization and amplify. Please ensure that 2 of the same length CAT5e / CAT6 STP cables are installed
● Compact size.
● Signaling rates up to 2.25Gbits in support of 1080P display.
● HDCP 1.2 compliant.

Specifications :

● Model 1x2HDMI_IR_3D

Signal Inputs/Output

● Input Video Signal : 0.5 -1.0 volts p-p
● Input DDC Signal : 5 volts p-p (TTL)
● Maximum Single Link Range : 1920X1080, 1080P
● Output Video : HDMI 1.3
● Video format supported : DTV/HDTV, 1080P /1080i / 720P / 576P / 480P / 576i / 480i

Mechanical

● Power Consumption : 5Watts (max.)
● Dimensions : 45mm W x 25mm H x 81mm D ● Warranty : Limited Warranty 1 Year Parts and Labour

Environmental

● Operating Temperature : 0 to +70C;
● Operating Humidity : 10% to 85 % RH
● Storage Temperature :-10C to +80C
● Storage Humidity : 5% to 95 % RH (no condensation)

Power Requirement

● External Power Supply : 5V DC@2A (included in purchase)
Regulatory Approvals
● Converter Unit : FCC,CE,UL
● Power Supply : UL,CE,FCC
Accessories Adapter
● AC Power Adapter : AC/DC Adapter with SA 2-pin Plug
● User Manual included

Connection and operating instructions :

1. Ensure all Home Entertainment Equipment has been powered off (Including source / player and display device)
2. Connect the HDMI input sources such as Multichoice HDPVR, Playstation 3, Xbox 360, HD-DVD, STB etc. into the Sender unit via an HDMI to HDMI cable.
3. Connect two CAT-5e / CAT-6 / CAT-7 STP cables to both the outputs of the sender unit and the inputs of the receiver unit using IEEE-568B wiring standard for the CAT cabling.
4. Connect the HDMI output display device such as LCD, Plasma or projector to the receiver unit via a HDMI to HDMI Cable.
5. Plug in the 5v, 2A power into the receiver unit.

In general for Blu-ray HDMI v1.0 is required as a minimum and for PS3 / Xbox 360 HDMI v1.2 is recommended as a minimum. HDMI v1.3 exceeds both HDMI v1.0 and v1.2 specifications.

These Extenders can be cascaded to reach unlimited transmission lengths e.g to double the maximum length specification of the extender connect another HDMI Extender set.

If you need to extend your HDMI signal for less than 20 meters and the cable does not run through conduit (which has limited space for the HDMI connector on a standard cable) we recommend that you use an HDMI Equalizer / Repeater with standard HDMI Cables

Most HDMI Sources / Players / Gaming Consoles use an encryption algorithm called HDCP which can cause signal issues. To troubleshoot audio / video issues (HDMI Handshake problems) regarding HDMI distribution see the problems and solutions guide at http://www.hdcabling.co.za/hdcp_hdmi_handshake_troubleshooting_guidelines.php

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

No HDMI / CAT-5e / CAT-6 / CAT-7 cables are included with this product and must be purchased separately.

Related Keywords : hdmi extension, hdmi extension cable, hdmi cat5 extender, hdmi over network cable, hdmi extend, longer hdmi lengths, increase hdmi length, HDMI Balun
Price: R2,299.00 Manufacturer: HDCabling
Model Number: 3D_1x2_HDMI_over_CAT6 Added to Inventory on: Monday 17 October, 2011

2D or 3D HDMI Extender over CAT6e / CAT7 with IR Extender using single or double CAT6e (50m 1080p / 100m 720p-1080i) - HDCP 1.2
HDMI IR Extenders are wired 1-2 and 2-1 on installation e.g CAT6e-1 on TX unit to CAT6e-2 on RX port. Using a single CAT6e cable signal can be transmitted up to 30m using 1080p with no IR and 3D. 3D and IR functionality required a 2nd CAT6e Cable to be used with extender and TX unit to be powered from external power supply included.

Tested 100% with all common HDMI sources such as HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

HDMI carries 2 channels : TMDS (Video/Audio & sync information) / CAT5e-1 Port on HDMI Extender and DDC (5 volt, HDCP information) / CAT5e-2 Port on HDMI Extender. More info at HDMI Signal Explained. Due to 100% stability needed on the TMDS / CAT5e-1 port channel for sync information CAT5e or CAT6 Shielded Twisted Pair (STP) is required to ensure no sync losses occur. CAT5e / STP UTP can be used for the DDC / CAT5e-2 port channel, but not recommended at all for HDMI Equipment and STP should be used for a stable installation. Basically you have one cable that is highly critical for video integrity and timing where the opposite cable is not as frequency-dependent, handling only the EDID, HDCP, power, hot plug and ground.

CAT5e Shielded Twisted Pair Cables at CAT5e Shielded Twisted Pair (STP) 350Mhz ISA/IEC 11801 Cable, CAT7 SSTP Cables at CAT7 SSTP Full Copper Ethernet Cable up to 10Gb/s. CAT5e FTP / STP depending on quality of cable (Full Copper cables) can be installed for resolutions up to 1080p depending on color depth, refresh rates & equipment signal quality, but only recommended up to 720p/1080i. For 1080p transmissions full copper CAT6e FTP / STP or CAT7 SSTP are required.

HDMI Extender / Balun with IR Link diagram

Please ensure cables are terminated according to 568A or 568B standard as in diagram below depending on CAT5e / CAT6 STP cable type and properly grounded via the ripcord wire inside STP cables. Grounding the cable will also ensure better protection against voltage spikes. STP cables shields better against nearby EMI.

STP or UTP 568B Termination/Crimping Standard

HDMI devices (any source / player, LCD, Plasma etc) have different results when inserting HDMI Repeater devices depending on the equipment you are using (a repeater device is any switch / splitter / extender etc). Compatibility cannot be always guaranteed due to some suppliers using revoked HDCP keys. This is normally seen on older HDTV's and occurs on < 5% of installations. Please ensure to get confirmation from the manufacturer of your source / player / LCD that the specific player or LCD can communicate via a HDMI Repeater (Any switch, digital receiver, amplifier, extender, splitter etc). Some source devices might not allow any HDMI device between itself and the LCD and will only function via a direct HDMI cable to the LCD. Your display or source manufacturer can confirm if their product supports the functions required.

Features :

● CAT5e / CAT6 cabling can fit into smaller areas than HDMI because of the head size of the HDMI cable (From 16 to 19mm) compared to 4-5mm for CAT5e / CAT6 STP Cables.
● One Sender & One Receiver module included.
● This extender set has an IR link functionality enabling you to control any IR device via it's own remote from the far end display back to the Extender set transmitter side near source device.
● Uses CAT5e / CAT6 Shielded Twisted Pair to substitute HDMI cable to achieve long distance transmissions. .
● Follow the standard of IEEE-568B when installing and terminating UTP / STP Cables to ensure minimum signal loss over longer distances.
● Transmission distance reaches up to 60 meters (1080P) and 100 meter 1080i / 720p. Transmission distance may vary on type of equipment used, quality of CAT5e / CAT6 cables used, quality of RJ45 shielded connectors and crimping quality of installation of RJ45 connectors.<.
● Auto-adjustment of feedback, equalization and amplify. Please ensure that 2 of the same length CAT5e / CAT6 STP cables are installed
● Compact size.
● Signaling rates up to 2.25Gbits in support of 1080P display.
● HDCP 1.2 compliant.

Specifications :

● Model HDMICAT60TX&RX_IR

Signal Inputs/Output

● Input Video Signal : 0.5 -1.0 volts p-p
● Input DDC Signal : 5 volts p-p (TTL)
● Maximum Single Link Range : 1920X1080, 1080P
● Output Video : HDMI 1.3
● Video format supported : DTV/HDTV, 1080P /1080i / 720P / 576P / 480P / 576i / 480i

Mechanical

● Power Consumption : 5Watts (max.)
● Dimensions : 45mm W x 25mm H x 81mm D ● Warranty : Limited Warranty 1 Year Parts and Labour

Environmental

● Operating Temperature : 0 to +70C;
● Operating Humidity : 10% to 85 % RH
● Storage Temperature :-10C to +80C
● Storage Humidity : 5% to 95 % RH (no condensation)

Power Requirement

● External Power Supply : 5V DC@2A (included in purchase)
Regulatory Approvals
● Converter Unit : FCC,CE,UL
● Power Supply : UL,CE,FCC
Accessories Adapter
● AC Power Adapter : AC/DC Adapter with SA 2-pin Plug
● User Manual included

Connection and operating instructions :

1. Ensure all Home Entertainment Equipment has been powered off (Including source / player and display device)
2. Connect the HDMI input sources such as Multichoice HDPVR, Playstation 3, Xbox 360, HD-DVD, STB etc. into the Sender unit via an HDMI to HDMI cable.
3. Connect two CAT-5e / CAT-6 / CAT-7 STP cables to both the outputs of the sender unit and the inputs of the receiver unit using IEEE-568B wiring standard for the CAT cabling.
4. Connect the HDMI output display device such as LCD, Plasma or projector to the receiver unit via a HDMI to HDMI Cable.
5. Plug in the 5v, 2A power into the receiver unit.

In general for Blu-ray HDMI v1.0 is required as a minimum and for PS3 / Xbox 360 HDMI v1.2 is recommended as a minimum. HDMI v1.3 exceeds both HDMI v1.0 and v1.2 specifications.

These Extenders can be cascaded to reach unlimited transmission lengths e.g to double the maximum length specification of the extender connect another HDMI Extender set.

If you need to extend your HDMI signal for less than 20 meters and the cable does not run through conduit (which has limited space for the HDMI connector on a standard cable) we recommend that you use an HDMI Equalizer / Repeater with standard HDMI Cables

Most HDMI Sources / Players / Gaming Consoles use an encryption algorithm called HDCP which can cause signal issues. To troubleshoot audio / video issues (HDMI Handshake problems) regarding HDMI distribution see the problems and solutions guide at http://www.hdcabling.co.za/hdcp_hdmi_handshake_troubleshooting_guidelines.php

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

No HDMI / CAT-5e / CAT-6 / CAT-7 cables are included with this product and must be purchased separately.

Related Keywords : hdmi extension, hdmi extension cable, hdmi cat5 extender, hdmi over network cable, hdmi extend, longer hdmi lengths, increase hdmi length, HDMI Balun
Price: R1,199.00 Manufacturer: HDCabling
Model Number: 3D_IR_50m_HDMI_Balun Added to Inventory on: Monday 10 October, 2011

3D HDMI Single Port Extender over CAT5e / CAT6 50 meter 1080p / 80m 720p
Features:

Support HDMI 1.2 protocol
Support full 3D
HDCP 1.2 protocol compliant
Support video input : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Signal transmission :Single CAT-5e STP or CAT-6 STP(recommended) cables up to 60 metres instead of HDMI cables are connected between TX and RX Extender.
Support video output : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support CEC
Audio format support : DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
No loss of quality
Installs in minutes
Need DC5V/2A power supply

SPECIFICATIONS: HDMICAT60RX&TX

Length of CAT-6 cable between Rx and TX…..……………….……………..Up to 60 metres
HDMI Input…..…………………...………24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format input..………DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
HDMI Output…..…………….…...………24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format output...……. …………………………LPCM7.1/DTS/Dolby-AC3/DSD
Max bandwidth……………………………………………………………………………2255MHz
Max baud rate……………….…….………………….………….………………………6.75Gbps
Input Video signal ………….…………………………..…………………….… 0.5~1.5Volts p-p
Output DDC signal ……………………………………………………………… 5Volts p-p (TT1L)
Input/Output HDMI1.3 cable distance………….…...≤20m AWG26 HDMI 1.3 standard cable
Max working current………………………………………………………………………...1000mA
Power adapter format………...………Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/2A
Operating Temperature range……..…………….………………………………… (-15 to +55℃)
Operating Humidity range………………………….….……….5 to 90%RH (No Condensation)
Dimension (L x W x H) ……………………………….…………………………82x45x21 (mm)
Weight…..………………………………………………………..………………………………220g
Price: R1,099.00 Manufacturer: HDCabling
Model Number: 3D_Single_HDMI_Extender Added to Inventory on: Sunday 14 October, 2012

3x1 (3 input ports) HDMI Switch with built-in Equalizer & IR Remote Control - HDCP 1.2, HDMI v1.3
This device does not require external power and acquires power directly from HDMI 5volt port power provided on all players / sources and LCD's.

Tested 100% with all common HDMI sources such as HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

HDMI devices (any source / player, LCD, Plasma etc) have different results when inserting HDMI Repeater devices depending on the equipment you are using (a repeater device is any switch / splitter / extender etc). Please ensure to get confirmation from the manufacturer of your source / player / LCD that the specific player or LCD can communicate via a HDMI Repeater. Some source devices might not allow any HDMI device between itself and the LCD and will only function via a direct HDMI cable to the LCD. The opposite is also possible where the LCD needs a direct connection to the source / player and will not accept a regenerated signal from a HDMI Repeater device. Your display or source manufacturer can confirm if their product supports the functions required.

Features :

● Power adapter format Input : AC (50HZ, 60HZ) 100V-240V; Output: DC5V / 0.6A (No external power adapter required or supplied, direct HDMI port 5v+ power is used to power switch)
● Switches easily between up to three HDMI sources / players / gaming consoles.
● Supports Blu-Ray 24/50/60 fps / HD-DVD / xvYCC / Playstation 3 / Multichoice HDPVR / XBOX 360 and other HDMI source devices on the market.
● Extends the range of HDMI compliant device by equalizing and re-clocking the HDMI signal.
● Maintains high resolution video - beautiful, sharp HDTV resolutions up to 1080p, 2k, and computer resolutions up to 1920 x 1200 are easily achieved.
● HDMI Built-In Equalizer to allow longer HDMI cables lengths up to 15 Meter.
● HDCP Compliant to allow switching of HDCP devices.
● Discrete IR remote (included).
● Supports deep color 30bit, 36bit.
● Digital audio format, as DTS-HD/Dolby-TrueHD / LPCM7.1 / DTS / Dolby-AC3 / DSD.
● Support signal retiming.
● Support input up to 15metres AWG24 HDMI 1.3 standard cable length.
● Output up to 20metres AWG24 cable length.
● Inputs can be switched with the IR remote control,also can be controlled by button.
● It can smartly jump over those input sources which are not connected.
● With the smart function of memory, it can come back to the last status / input when restarted or reconnected.
● No loss of quality.
● Installs in minutes.
● Works directly from HDMI port power supply from source and display power - If non-standard HDMI equipment are used (0.5v power supply) you may require an external power supply, but this is rarely the case.

Specifications :

- Model : HDS_31_mini
- HDMI version : HDMI 1.3
- HDCP version : HDCP1.2
- Frames per Second : 24/50/60 fps.
- Resolutions: 1080p / 1080i / 720p / 576p / 576i / 480p / 480i
- Support video color format : 24bit / 30-bit / 36-bit deep color
- Support audio format : DTS-HD / Dolby-TrueHD / LPCM7.1 / DTS / Dolby-AC3 / DSD
- Max transmission bandwidth : 10.2Gbps
- Input/Output TMDS signal : 0.5~1.5Volts p-p
- Input/Output DDC signal : 5Volts p-p (TTL)
- Input cable distance : ≤15m HDMI AWG24
- Output cable distance : ≤20m AWG24 HDMI 1.3 standard cable
- Max working current : 600mA
- Operating Temperature range : (-15 to +55℃)
- Operating Humidity range : 5 to 90%RH (No Condensation)
- Dimension (L x W x H) : 11.5 x 6 x 2.7 cm

Connection and operating instructions :

1. Ensure all Home Entertainment Equipment has been powered off (Including source / player and display device)
2. Connect one cable from each HDMI source device into HDMI Switch inputs.
3. Connect one cable from display (monitor or projector) into the HDMI Switch output.
4. Power on all equipment.
5. Use the IR remote control port to remotely switch between sources.

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. This item conforms to the HDMI v1.3 specifications described in the section. In general for Blu-ray HDMI v1.0 is required as a minimum and for PS3 / Xbox 360 HDMI v1.2 is recommended as a minimum. HDMI v1.3 exceeds both HDMI v1.0 and v1.2 specifications.

3 X 1 HDMI Switch Wiring Diagram

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this switch and for alternative wiring options.

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

This item is supplied without packaging / boxing directly from the factory to reduce costs to the public. You will not find another quality HDMI product such as this at a better price.
Related Keywords : audio video adapters, audio cable connectors, hdmi converter, hdmi switcher 3 ports, 3 port hdmi switching, 3 port dvi switch, dvi switcher, remote hdmi 3 port switch, vga hdmi, hdmi input, audio video switch, hdmi connection, 5 port digital switch, audio switch 3 port
Price: R369.00 Manufacturer: HDCabling
Model Number: 3x1_Switch_HDMI_Mini_IR_Remote Added to Inventory on: Sunday 06 July, 2008

3x1 (3 input ports) Manual HDMI Switch - Push Button Type
This device does not require external power and acquires power directly from HDMI 5volt port power provided on all players / sources and LCD's.

Tested 100% with all common HDMI sources such as HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

HDMI devices (any source / player, LCD, Plasma etc) have different results when inserting HDMI Repeater devices depending on the equipment you are using (a repeater device is any switch / splitter / extender etc). Please ensure to get confirmation from the manufacturer of your source / player / LCD that the specific player or LCD can communicate via a HDMI Repeater. Some source devices might not allow any HDMI device between itself and the LCD and will only function via a direct HDMI cable to the LCD. The opposite is also possible where the LCD needs a direct connection to the source / player and will not accept a regenerated signal from a HDMI Repeater device. Your display or source manufacturer can confirm if their product supports the functions required.

This is 3 Port HDMI Selector from 3 HDMI signals and display it on one device making it an excellent choice for HDMI Select system.

Features :

● Support high-resolution display settings.
● Supports HDCP
● Compact in size (only 5cm x 5cm).
● 3 HDMI (hdcp) inputs.
● 1 HDMI (hdcp) output.
● No IR Remote needed.
● No Power Supply needed in most cases.
● Auto selects any active input signal from the three inputs to the single HDMI output.
● Manual selection button (for manually selecting an input if needed).
● Signaling rates up to 10.2Gbits in support of 1080P Full HD displays.
● Powerful receiver equalization to compensate for 15m HDMI cable losses.
● Pre-emphasis to compensate for PCB losses.

Smart Function (Auto Selection): When more than one HDMI sources connected to the switch the user leaves the desired source on, the others off, then the switch will choose this source automatically and will route desired HDMI signal to the display. If several sources are powered on, the last powered source will be chosen. As result of this functionality, user could use simple method of power off/on sources to choose the desired HDMI signal.

(*)This switch does not include any cables. You need to buy HDMI cables separately. Actual Image displayed on the right. Simulation displayed in image below. Switch does NOT include a remote control.

3 X 1 HDMI Switch Wiring Diagram

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON. The sequence below should be followed when installing new cables or equipment between source/player and LCD / Plasma.

1.) Power-off all equipment (At the wall socket).
2.) Connect all Cables, Splitters, Switches, Extenders within HDMI Distribution Network.
3.) Power on all Splitters, Switches, Extenders within HDMI Distribution Network.
4.) Power on all LCD / Plasma's and set to HDMI input from HDMI Distribution Network.
5.) Power on Sources / Players (Sources negotiates HDCP Handshake via HDMI Network to displays which is set to HDMI input to respond to handshake).

A technical guide on how to choose HDMI Cables & Equipment is available at http://www.hdcabling.co.za/Choosing_the_correct_cables_hdmi_how_much_bandwidth_is_needed.php. This switch conforms to the HDMI v1.2 specifications described in the section. In general for Blu-ray HDMI v1.0 is required as a minimum and for PS3 / Xbox 360 HDMI v1.2 is recommended.

The HDMI Switcher allows access to multiple HDMI devices, such as DVD players and Satellite set-top boxes to one HDMI display. This device is used when you have multiple HDMI devices (DSTV HDPVR, & DVD Player / Blu-Ray Player) and only one HDMI input on your LCD TV.

It's a best choice for home theatre systems and dual computer users. No more hassles of manually plugging in different HDMI connectors to view different HDMI sources.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this switch and for alternative wiring options.

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Related Keywords : audio video adapters, audio cable connectors, hdmi converter, hdmi 3 port switch, hdmi switching, dvi switch, dvi switcher, remote hdmi switch, vga hdmi, hdmi input selector, audio video switch, hdmi connection, digital switch, audio switch, hdmi 3 port switchers, hdmi 3 port switcher
Price: R269.00 Manufacturer: HDCabling
Model Number: 3x1_HDMI_Switch_Manual Added to Inventory on: Thursday 28 August, 2008

4x1 (4 input ports) HDMI Switch incl 3D support with Optical audio output & IR remote - HDCP v1.2, HDMI v1.4
Switch has been tested with HDPVR 2P, HDPVR Pace and UEC to output dolby digital 5.1 from the HDMI ports on all devices supporting dolby digital 5.1 output via HDMI port.

Also tested with Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market to output dolby digital 5.1 via optical output.

HDMI devices (any source / player, LCD, Plasma etc) have different results when inserting HDMI Repeater devices depending on the equipment you are using (a repeater device is any switch / splitter / extender etc). Please ensure to get confirmation from the manufacturer of your source / player / LCD that the specific player or LCD can communicate via a HDMI Repeater. Some source devices might not allow any HDMI device between itself and the LCD and will only function via a direct HDMI cable to the LCD. The opposite is also possible where the LCD needs a direct connection to the source / player and will not accept a regenerated signal from a HDMI Repeater device. Your display or source manufacturer can confirm if their product supports the functions required.

This switch has 4 x HDMI inputs, 1 x HDMI output, 1 x Optical audio output. It features a built in audio converter that will convert the HDMI audio from any of the 4 HDMI inputs and convert it to simultaneous audio output in HDMI & Optical. That way you can integrate any type of digital sound system, even if it doesn't directly support HDMI audio.

Features :

● Switches easily between up to four HDMI sources / players / gaming consoles.
● Supports Blu-Ray 24/50/60 fps / HD-DVD / xvYCC / Playstation 3 / Multichoice HDPVR / XBOX 360 and other HDMI source devices on the market.
● Supports switching of 3D content.
● Extends the range of HDMI compliant device by equalizing and re-clocking the HDMI signal.
● Maintains high resolution video - beautiful, sharp HDTV resolutions up to 1080pand computer resolutions up to 1920 x 1080 are easily achieved.
● HDMI Built-In Equalizer to allow longer HDMI cables lengths up to 15 Meter.
● HDCP Compliant to allow switching of HDCP devices.
● Discrete IR remote (included).
● Supports deep color 30bit, 36bit.
● Digital audio format, as DTS-HD/Dolby-TrueHD / LPCM7.1 / DTS / Dolby-AC3 / DSD.
● Support signal retiming.
● Support input up to 15metres AWG24 HDMI 1.3/1.4 standard cable length.
● Output up to 15metres AWG24 cable length.
● Inputs can be switched with the IR remote control,also can be controlled by button.
● It can smartly jump over those input sources which are not connected.
● With the smart function of memory, it can come back to the last status / input when restarted or reconnected.
● No loss of quality.
● Installs in minutes.
● Need DC5V / 0.8A power supply. Included with purchase.

Specifications :

- HDMI version : HDMI 1.4
- HDCP version : HDCP1.2
- Frames per Second : 24/50/60 fps.
- Resolutions: 1080p / 1080i / 720p / 576p / 576i / 480p / 480i
- Support video color format : 24bit / 30-bit / 36-bit deep color
- Support audio input format : DTS-HD / Dolby-TrueHD / LPCM7.1 / DTS / Dolby-AC3 / DSD
- Audio Output : HDMI same as input, Optical Dolby Digital / Digital PCM 48Khz via Toslink Optical port, Analog Stereo Output via 3.5mm connector
- Max transmission bandwidth : 10.2Gbps
- Input/Output TMDS signal : 0.5~1.5Volts p-p
- Input/Output DDC signal : 5Volts p-p (TTL)
- Input cable distance : ≤15m HDMI AWG24
- Output cable distance : ≤15m AWG24 HDMI 1.3 standard cable
- Max working current : 800mA
- Power adapter format Input : AC (50HZ, 60HZ) 100V-240V; Output: DC5V / 0.8A
- Operating Temperature range : (-15 to +55℃)
- Operating Humidity range : 5 to 90%RH (No Condensation)
- Dimension (L x W x H) : 11.5 x 11.6 x 2.4 cm

Connection and operating instructions :

1. Ensure all Home Entertainment Equipment has been powered off (Including source / player and display device)
2. Connect one cable from each HDMI source device into HDMI Switch inputs.
3. Connect one cable from display (monitor or projector) into the HDMI Switch output.
4. Connect 5V power supply to the HDMI 5x1 Switcher.
5. Use the IR remote control port to remotely switch between sources.

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements.

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Related Keywords : audio video adapters, audio cable connectors, hdmi converter, hdmi switcher 4 ports, 4 port hdmi switching, 4 port dvi switch, dvi switcher, remote hdmi 4 port switch, vga hdmi, hdmi input, audio video switch, hdmi connection, 4 port digital switch, audio switch 4 port
Price: R849.00 Manufacturer: HDCabling
Model Number: 3D_4x1_HDSwitch_Audio Added to Inventory on: Tuesday 11 October, 2011

4x2 (4 inputs, 2 outputs) True Matrix Powered Switch / Splitter with audio decoder to Optical Toslink and 3.5mm analog - Remote Control included
Tested 100% with all common HDMI sources such as HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

HDMI devices (any source / player, LCD, Plasma etc) have different results when inserting HDMI Repeater devices depending on the equipment you are using (a repeater device is any switch / splitter / extender etc). Please ensure to get confirmation from the manufacturer of your source / player / LCD that the specific player or LCD can communicate via a HDMI Repeater. Some source devices might not allow any HDMI device between itself and the LCD and will only function via a direct HDMI cable to the LCD. The opposite is also possible where the LCD needs a direct connection to the source / player and will not accept a regenerated signal from a HDMI Repeater device. Your display or source manufacturer can confirm if their product supports the functions required.

Specifications :

● Support for Deep Color Signal.
● Autoskip for unconnected inputs.
● Operating temp: -5 to +35 degrees C (-41 to +95 degrees F)
● Data transfer speed: 2.25 Gbps x 3
● Input Video Signal: 0.5-1.0 volts p-p
● Input DDC Signal: 5 volts p-p (TTL)
● Max working current: 1200mA
● Power adapter supply: DC 5V, 2A, 2-pin SA Adapter supplied with purchase
● Power adapter format: Input AC (50Hz.60Hz) 100V-240V; Output DC 5V
● Output Video via HDMI: HDMI 1.3a +HDMCP 1.0/1.1/1.2
● Output Audio decoder : via HDMI same as input, PCM or Dolby Digital via Optical, Stereo analog audio output via 3.5mm audio jack.
● Support Resolution : 1080p / 1080i / 720p / 576p / 480p / 576i / 480i
● Full-HD Chain: 1080p cascade above 6 layers
● Support video color format: deep color 24bit/36bit
● Support HDMI audio input / output format: PCM, Dolby-AC3, DTS 7.1, DSD, Dolby TrueHD, Dolby Master Audio
● HDMI output cable distance: <=15m (can be extended with amplifier in most cases)
● HDMI version: 1.3a
● HDCP version: 1.2

Package Content:

1. Main Unit
2. Remote Controller - Remotes function on a double-tap procedure more efficient than on single tap.
3. Power Adapter
4. Operating instructions

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. This item conforms to the HDMI v1.3 specifications described in the section. In general for Blu-ray HDMI v1.0 is required as a minimum and for PS3 / Xbox 360 HDMI v1.2 is recommended as a minimum. HDMI v1.3 exceeds both HDMI v1.0 and v1.2 specifications.

As the name states this is a True Matrix switcher meaning you can independantly assign any of the 4 inputs to each of the 2 ouputs. The device is 1.3a spec'd meaning it will pass the high output signal needed to enjoy Full HD video. Additionally, the device will support new high resolution, multi-channel digital audio formats. The unit also comes with a remote control with direct access input buttons for each out the ouputs.

You can have 1 input display on 2 outputs (Used as Splitter), or you can cross over and have input 1 display on output A, while having input 2 display on output B (Switch / Splitter Combo).

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON. The sequence below should be followed when installing new cables or equipment between source/player and LCD / Plasma.

1.) Power-off all equipment (At the wall socket).
2.) Connect all Cables, Splitters, Switches, Extenders within HDMI Distribution Network.
3.) Power on all Splitters, Switches, Extenders within HDMI Distribution Network.
4.) Power on all LCD / Plasma's and set to HDMI input from HDMI Distribution Network.
5.) Power on Sources / Players (Sources negotiates HDCP Handshake via HDMI Network to displays which is set to HDMI input to respond to handshake).

After power-on sequence was done, the inputs on the LCD / Plasma can be changed normally and source / displays can be powered on/off as usual. The equipment within the HDMI Distribution Network should never be powered off and if powered off should be powered on first. LCD's should always be powered on first during normal usage and set to the correct HDMI input port before the source/players are powered on. Repeat this power-on sequence after a general power failure has occurred. Power-on sequence is recommended for HD PVR / Blu-rays and most HDCP devices.

4 X 2 HDMI Switch / Splitter Combo Wiring Diagram

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this switch and for alternative wiring options.

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Related Keywords : audio video adapters, hdmi splitter, audio cable connectors, hdmi converter, hdmi switcher, hdmi switching, hdmi video split, dvi switch, dvi switcher, remote hdmi switch, vga hdmi, hdmi input, audio video switch, hdmi connection, digital switch, audio switch, split hdmi signal, hd distribute, hdtv split, hdmi distribute
Price: R1,149.00 Manufacturer: HDCabling
Model Number: 4x2_HDMI_Matrix_with_Audio Added to Inventory on: Friday 23 April, 2010

4x4 True Matrix Extender over CAT6 with 4 Receiver units up to 60 Meter 1080p, 3D & IR Support

The HDMI 4x4 Matrix Switch with 3D over CAT-5 with IR Pass-Through provides the most flexible and cost effective solution in the market to route high definition video sources plus multi-channel (up to 7.1 channel) digital audio from any of the four HDMI sources to the remote displays at the same time. Through low cost Cat-5/5e/6 LAN cables, not only high quality video and audio can be transmitted to the display sites, but also users can switch among four HDMI sources using the push-in button or remote control. With single power design at the source site, each remote module is easily installed without power supply. Furthermore, the built-in IR extension function makes users at display site access the DVD player, PS3 or any HDMI supported devices directly.

Specifications

  • Silicon Image chipset embedded for best quality, compatibility and reliability
  • Support HDMI Deep Color & full 3D
  • HDCP compliant
  • Allows any source to be displayed on multiple displays at the same time
  • Allows any HDMI display to view any HDMI source at any time
  • Supports 7.1 channel digital audio
  • Supports default HDMI EDID and learns the EDID of displays
  • The matrix master can switch every output channels to any HDMI inputs by push-in button, IR remote Control, or RS-232 control
  • Allows controlling local HDMI sources such as DVD, Decoder, Bluray_player etc by attached IR extender from remote receiver to matrix master
  • Allows to control matrix master through IR remote control at remote receiver’s site
    Extends video signal up to 35m (115 feet) over CAT5e at 1080p and likely longer with better HDMI source device, better grade HDMI display, and better quality solid CAT6 cable
  • Easy installation with rack-mounting and wall-mounting designs for master and receiver respectively
  • Fast response time – 2~5 seconds for channel


Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Price: R7,299.00 Manufacturer: HDCabling
Model Number: 4x4_Matrix_CAT6e_4RX Added to Inventory on: Friday 23 November, 2012

4x4 True Matrix Powered Switch / Splitter with IR Remote Control - HDCP 1.2, HDMI v1.3
Tested 100% with all common HDMI sources such as HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

HDMI devices (any source / player, LCD, Plasma etc) have different results when inserting HDMI Repeater devices depending on the equipment you are using (a repeater device is any switch / splitter / extender etc). Please ensure to get confirmation from the manufacturer of your source / player / LCD that the specific player or LCD can communicate via a HDMI Repeater. Some source devices might not allow any HDMI device between itself and the LCD and will only function via a direct HDMI cable to the LCD. The opposite is also possible where the LCD needs a direct connection to the source / player and will not accept a regenerated signal from a HDMI Repeater device. Your display or source manufacturer can confirm if their product supports the functions required.

Make the 4x4 True Matrix Switch / Splitter the heart of any truely complex and impressive home theater system. The device features 4 inputs and 4 independently assignable outputs giving you true flexibility and the ability to have various media playing on different screens. Great for coreographing an awe inspiring multi-media experience or simply allowing multiple members of the family the freedom to watch from whatever source they choose on their own screen.

Specifications :

● Model HDX-404E
● Support for Deep Color Signal.
● Supports RS232 serial port for own automation commands from PC or Laptop.
● Autoskip for unconnected inputs.
● Operating temp: -5 to +35 degrees C (-41 to +95 degrees F)
● Data transfer speed: 2.25 Gbps x 3
● Input Video Signal: 0.5-1.0 volts p-p
● Input DDC Signal: 5 volts p-p (TTL)
● Max working current: 1800mA
● Power adapter format: Input AC (50Hz.60Hz) 100V-240V; Output DC 5V
● Output Video: HDMI 1.3a + HDCP 1.0/1.1/1.2
● Support Resolution : 1080p / 1080i / 720p / 576p / 480p / 576i / 480i
● Full-HD Chain: 1080p cascade above 6 layers
● Support video color format: deep color 24bit/36bit
● Support audio format: PCM, Dolby-AC3, DTS 7.1, DSD, Dolby TrueHD, Dolby Master Audio
● HDMI output cable distance: <=15m (can be extended with amplifier in most cases)
● HDMI version: 1.3a
● HDCP version: 1.2

Features

● HDMI 1.3a compliance.
● High bandwidth pass through with support for deep color and advanced digital audio formats.
● 4 inputs and 4 independent outputs.
● IR remote control.
● AC/DC Power Adapter included.

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. This item conforms to the HDMI v1.3 specifications described in the section. In general for Blu-ray HDMI v1.0 is required as a minimum and for PS3 / Xbox 360 HDMI v1.2 is recommended as a minimum. HDMI v1.3 exceeds both HDMI v1.0 and v1.2 specifications.

As the name states this is a True Matrix switcher meaning you can independantly assign any of the 4 inputs to each of the 4 ouputs. The device is 1.3a spec'd meaning it will pass the high output signal needed to enjoy Deep Color video. Additionally, the device will support new high resolution, multi-channel digital audio formats. The unit also comes with a remote control with direct access input buttons for each out the ouputs.

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON. The sequence below should be followed when installing new cables or equipment between source/player and LCD / Plasma.

1.) Power-off all equipment (At the wall socket).
2.) Connect all Cables, Splitters, Switches, Extenders within HDMI Distribution Network.
3.) Power on all Splitters, Switches, Extenders within HDMI Distribution Network.
4.) Power on all LCD / Plasma's and set to HDMI input from HDMI Distribution Network.
5.) Power on Sources / Players (Sources negotiates HDCP Handshake via HDMI Network to displays which is set to HDMI input to respond to handshake).

After power-on sequence was done, the inputs on the LCD / Plasma can be changed normally and source / displays can be powered on/off as usual. The equipment within the HDMI Distribution Network should never be powered off and if powered off should be powered on first. LCD's should always be powered on first during normal usage and set to the correct HDMI input port before the source/players are powered on. Repeat this power-on sequence after a general power failure has occurred. Power-on sequence is recommended for HD PVR / Blu-rays and most HDCP devices.

4 X 4 HDMI True Matrix Switch / Splitter Combo Wiring Diagram

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this switch and for alternative wiring options.

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Related Keywords : audio video adapters, hdmi true matrix splitter, audio cable connectors, hdmi converter, hdmi switcher, hdmi matrix switching, hdmi video matrix split, dvi matrix switch, dvi true matrix switcher, remote hdmi switch, vga hdmi, hdmi input, audio video switch, hdmi connection, digital switch, audio switch, split hdmi signal, hd distribute, hdtv split, hdmi distribute
Price: R3,799.00 Manufacturer: HDCabling
Model Number: 4x4_HDMI_True_Matrix_Switch Added to Inventory on: Tuesday 11 August, 2009

5x1 (5 input ports) HDMI Switch with built-in Equalizer and Remote Control - HDCP 1.2, HDMI v1.3
Tested 100% with all common HDMI sources such as HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

HDMI devices (any source / player, LCD, Plasma etc) have different results when inserting HDMI Repeater devices depending on the equipment you are using (a repeater device is any switch / splitter / extender etc). Please ensure to get confirmation from the manufacturer of your source / player / LCD that the specific player or LCD can communicate via a HDMI Repeater. Some source devices might not allow any HDMI device between itself and the LCD and will only function via a direct HDMI cable to the LCD. The opposite is also possible where the LCD needs a direct connection to the source / player and will not accept a regenerated signal from a HDMI Repeater device. Your display or source manufacturer can confirm if their product supports the functions required.

Features :

● Switches easily between up to five HDMI sources / players / gaming consoles.
● Supports Blu-Ray 24/50/60 fps / HD-DVD / xvYCC / Playstation 3 / Multichoice HDPVR / XBOX 360 and other HDMI source devices on the market.
● Extends the range of HDMI compliant device by equalizing and re-clocking the HDMI signal.
● Maintains high resolution video - beautiful, sharp HDTV resolutions up to 1080p, 2k, and computer resolutions up to 1920 x 1200 are easily achieved.
● HDMI Built-In Equalizer to allow longer HDMI cables lengths up to 15 Meter.
● HDCP Compliant to allow switching of HDCP devices.
● Discrete IR remote (included).
● Supports deep color 30bit, 36bit.
● Digital audio format, as DTS-HD/Dolby-TrueHD / LPCM7.1 / DTS / Dolby-AC3 / DSD.
● Support signal retiming.
● Support input up to 15metres AWG24 HDMI 1.3 standard cable length.
● Output up to 20metres AWG24 cable length.
● Inputs can be switched with the IR remote control,also can be controlled by button.
● It can smartly jump over those input sources which are not connected.
● With the smart function of memory, it can come back to the last status / input when restarted or reconnected.
● No loss of quality.
● Installs in minutes.
● Need DC5V / 0.8A power supply. Included with purchase.

Specifications :

- Model HDSWM0501
- HDMI version : HDMI 1.3
- HDCP version : HDCP1.2
- Frames per Second : 24/50/60 fps.
- Resolutions: 1080p / 1080i / 720p / 576p / 576i / 480p / 480i
- Support video color format : 24bit / 30-bit / 36-bit deep color
- Support audio format : DTS-HD / Dolby-TrueHD / LPCM7.1 / DTS / Dolby-AC3 / DSD
- Max transmission bandwidth : 10.2Gbps
- Input/Output TMDS signal : 0.5~1.5Volts p-p
- Input/Output DDC signal : 5Volts p-p (TTL)
- Input cable distance : ≤15m HDMI AWG24
- Output cable distance : ≤20m AWG24 HDMI 1.3 standard cable
- Max working current : 800mA
- Power adapter format Input : AC (50HZ, 60HZ) 100V-240V; Output: DC5V / 0.8A
- Operating Temperature range : (-15 to +55℃)
- Operating Humidity range : 5 to 90%RH (No Condensation)
- Dimension (L x W x H) : 11.5 x 11.6 x 2.4 cm

Connection and operating instructions :

1. Ensure all Home Entertainment Equipment has been powered off (Including source / player and display device)
2. Connect one cable from each HDMI source device into HDMI Switch inputs.
3. Connect one cable from display (monitor or projector) into the HDMI Switch output.
4. Connect 5V power supply to the HDMI 5x1 Switcher.
5. Use the RMT-IR remote control port to remotely switch between sources.

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. This item conforms to the HDMI v1.3 specifications described in the section. In general for Blu-ray HDMI v1.0 is required as a minimum and for PS3 / Xbox 360 HDMI v1.2 is recommended as a minimum. HDMI v1.3 exceeds both HDMI v1.0 and v1.2 specifications.

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

5 X 1 HDMI Switch Wiring Diagram

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this switch and for alternative wiring options.

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

This item is supplied without packaging / boxing directly from the factory to reduce costs to the public. You will not find another quality HDMI product such as this at a better price.

Related Keywords : audio video adapters, audio cable connectors, hdmi converter, hdmi switcher 5 ports, 5 port hdmi switching, 5 port dvi switch, dvi switcher, remote hdmi 5 port switch, vga hdmi, hdmi input, audio video switch, hdmi connection, 5 port digital switch, audio switch 5 port
Price: R579.00 Manufacturer: HDCabling
Model Number: 5x1_Switch_HDMI_IR_Remote Added to Inventory on: Monday 30 June, 2008

Active 3D shutter Glasses (support IR and Bluetooth)
Active 3D shutter Glasses (support IR and Bluetooth) to view 3D content on HDTV. Supports up to 100Hz refresh rate.

Supports the following TV brands and any other 3D HDTV's with IR or Bluetooth for Active 3D Glasses:

Specifications:

3D Glasses Type: Active Shutter Glasses
Synchronous:IR & Bluetooth
Display Compatibility:3D HDTV, Blue-ray players
Frequency:120HZ
Response Time:2.0ms
Contrast:750
Transmission:>37%
Battery Type: 3.7V/60mAh Chargeable Lithium-ion
Continuously Working Time:about 40 Hours
Charge Time:about 2 Hours
Dimension:165 x 40 x 165 mm
Net Weight: 46g
Environment Temperature:0-40'C
Relative Humidity:20%-80% RH
Atmospheric Pressure: 86kPa-106kPa

Price: R649.00 Manufacturer: HDCabling
Model Number: Active_3D_Shutter_Glasses Added to Inventory on: Sunday 14 October, 2012

Active HDMI to VGA Cable with Audio Output
Tested 100% with all common HDMI sources such as Multichoice HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

This product is similar to the HDFURY and HDMI to VGA Ultimate 1080 model powered converters. It will convert video from a HDMI source to VGA / HD15 / D-Sub (15 pins, 3 rows of 5 pins each). It will also separate audio from the HDMI stream and output it via the 3.5mm jack plug adapter.

Features

● Supported video input : HDMI 1080P / 720p / 1080i
● Supported output :
- VGA: 480P/50HZ, 480P/60HZ, 720P/50HZ, 720P/60HZ, 1080P/50HZ, 1080P/60HZ
● Supports all major digital audio inputs and downconvert audio to stereo analogue output via the 3.5mm jack plug on the cable..
● Supports the same format as input. No Upscaling or downscaling of resolutions. Your end display needs to supported the resolution on the VGA input from the source device e.g for 720p the resolution 1280 x 720 needs to be supported on display which is a 16:9 aspect ratio, for 1080p input, 1920 x 1080 needs to be supported on the display device VGA input.
● HDCP 1.2 protocol compliant.
● Installs in seconds
● Powered from HDMI Source device 5v HDMI port.

Connection and Operation Instructions

1. Connect one cable from HDMI Source / Player into the Converter HDMI input.
2. Connect VGA from monitor or projector into converter output.
3. Connect audio output from this cable to a speaker set or digital or analogue receiver RCA or 3.5mm audio inputs. Most HDTV's has 3.5mm audio input on the PC-IN (VGA input) as well.

Specifications

● Max transmission bandwidth : 5.1Gbps
● Max working current : 600mA
● Operating Temperature range : (-15 to +55℃)
● Operating Humidity range : 5 to 90%RH (No Condensation)
● Weight : 130g

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Related Keywords : HDMI to VGA, HDMI to D-sub, HDMI to RGB, RGB from HDMI Converter, HDMI to YPbPr Converter, HDMI to 3-RCA Converter, HDMI to Component video converter, HDFURY 2 video Converter, Component from HDMI Converter
Price: R759.00 Manufacturer: HDCabling
Model Number: HDMI_to_VGA_with_audio_Cable Added to Inventory on: Sunday 08 July, 2012

All to HDMI Scaler & Media Player - Upscale to 720p / 1080p (Composite,Component,AV,VGA to HDMI) - Supports USB Media Playback and upscaling

The All to HDMI Scaler & Media Player is capable of switching between 8 input sources, scaling any one of the sources up to HDMI. The output resolution is also selectable between 720P and 1080P. It converts the signal from DVD player, Blu-ray Disc player, DVR, gaming console, STB, PC, etc. to HDMI. It is HDMI 1.3 version and HDCP compliant.

Video & Audio Inputs

2-way USB Media Ports (For playback of media / scale to HDMI output)
1-way Composite Video signal
1-way Component Video signal
 
1-way VGA signal
2-way HDMI (Device Function as HDMI switch as well)
1 x Stereo Audio RCA Inputs
1 x Digital Audio RCA Input

Video & Audio Outputs

1-way HDMI
1 x Stereo R/L Audio (via 3.5mm Headphone / speaker jack)

Features

  • 1 CVBS, 1 YPbPr, 1 VGA, 2 HDMI and 2 USB inputs
  • USB movie, picture and music playback
  • 720p and 1080p high definition HDMI output
  • PAL, NTSC and SECAM color systems supported
  • -5% to +5% display ratio range control
  • Auto Detect function (except USB)
  • Brightness, contrast, color, sharpness, hue control
  • Soft, Standard, Bright and Personal 4 preset picture modes
  • Picture mode setting saved for respective source
  • Geometry control for VGA input with auto tune function
  • Capture USB picture and save as user defined logo
  • Volume control
  • Remote control
  • Standby mode

Scaling Function

Up-scales any of the input sources to HDMI 720P or 1080P, also up-scales any of the two HDMI inputs if it is 480i, 480p, 576i, 576p, 720p (50HZ; 60HZ);1080i (50 HZ; 60HZ) to 720P or 1080P.

Switch Function

Select between input sources to be output to the single output HDMI and select output HDMI resolution by IR remote control.

Input Resolutions:

  • CVBS: PAL, NTSC, SECAM with stereo audio input
  • YPbPr: 1080p@50/60Hz, 1080i@50/60Hz, 720p@50/60Hz, 576i/p, 480i/p with stereo audio input
  • VGA: 640x480@60Hz, 800x600@60Hz, 1024x768@60Hz, 1280x1024@60Hz, 1280x720@60Hz, 1360x768@60Hz, 1440x900@60Hz, 1680x1050@60Hz, 1920x1080@60Hz with stereo audio input
  • HDMI: 1080p@50/60Hz, 1080i@50/60Hz, 720p@50/60Hz, 576i/p, 480i/p, 640x480@60Hz, 800x600@60Hz, 1024x768@60Hz, 1280x1024@60Hz, 1280x720@60Hz, 1360x768@60Hz, 1440x900@60Hz, 1680x1050@60Hz, 1920x1080@60Hz
  • USB: MPEG, H.264, RM/RMVB, .MP4, .MKV movie decode, JPEG, BMP, PNG picture decode and MPEG1/2, MP3 audio decode

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Related Keywords : SCART to HDMI, AV to HDMI, RCA to HDMI, Composite to HDMI, DVI to HDMI, Component to HDMI, HDMI Upscaler, HDMI Scaler, HDMI Scalar, HDMI Upscalar, Increase HDMI Resolution to 720p, Increase HDMI Resolution to 1080p, convert any video to HDMI, HDMI Switch

Price: R1,699.00 Manufacturer: HDCabling
Model Number: All_to_HDMI_Converter Added to Inventory on: Thursday 06 September, 2012

Anaglyph 3D Glasses for 2D to 3D Converter, Cyberlink PowerDVD 11 3D, Nvidia Geforce 3D Vision or iZ3D (ATI) Rendering
These glasses are commonly used with the Realtime 2D to 3D Converter at Realtime 2D to 3D Converter when using external sources / Players e.g HDPVR, Gaming Consoles, DVD Players etc.

The glasses can also be used for the 3D Feature using Cyberlink PowerDVD 11 and upwards on any PC or Notebook to produce a 3D image from 2D movies / content by enabling 3D on the PowerDVD application or 3D side-by-side .avi movies.

For Gaming in 3D using these glasses for GeForce Graphics cards the Nvidia 3D Vision driver needs to be configured. ATI does not currently support it via their drivers but 3rd party software such as iZ3D is available for download for rendering games in Anaglyph 3D mode on PC's with ATI graphics cards.

These glasses can either feature Amber / Cyan or Red / Cyan lenses which will provide different levels of 3D effects based on content rendered. Please specify during cart checkout which type is preferred.
Price: R69.00 Manufacturer: HDCabling
Model Number: 3D_Glasses Added to Inventory on: Monday 10 October, 2011

Component / YPbPr & Stereo RCA Audio to HDMI Converter (Combines Component and Audio signal)
This Component Video + audio to HDMI converter combines your analogue high def and/or progressive scan Y, Pb, Pr (Component) video signals with RCA Stereo Left / Right from your source devices and outputs the signal in HDMI format. This allows you to connect your legacy Component Video sources to your newer HDMI HDTV's and A/V receivers. No need to replace the high end video player you bought only a few years ago just because it doesn't support HDMI. This Analog to Digital converter provides a perfect interim solution until you decide to move on to the next great high def format.

**Note - This device is a format converter, not a scaler. It will not upscale a standard definition signal into high definition. It will simply allow a component signal to be plugged into an HDMI port in a situation where no Component inputs are available. Component is a High Definition signal and if HD analogue input received by converter it will output HD Digital content via HDMI port.

Specifications

- Model HDCYUV0101
- Input Video Signal: 1.2V p-p
- Input DDC Signal: 5 V p-p (TTL)
- Output Video: HDMI 1.2 + HDCP 1.0/1.1
- HDMI Connector: Type A (19 pin) female
- Video Connector: 3 RCA Component
- Audio Connector: 2 x Stereo Audio (Red/White RCA)
- HDMI Video Amplifier Bandwidth: 1.65Gbps/165Mhz
- Frequency: Up to 165Mhz
- Supported Resolutions: 480i thru 1080p
- Size: 91mm (w) x 22mm (h) x 75mm (d)
- Shipping Weight: 0.35 Kgs
- Operating Temperature: 0 degree C to 70 degrees C.
- Operating Humidity: 10% to 85% RH (no condensation)
- Storage Temperature: -10 degrees C to 80 degrees C
- Storage Humidity: 5% to 90% RH (no condensation)
- External Power Supply: 5V DC @ 2A included with purchase
- Regulatory Approvals: FCC, CE UL

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Price: R679.00 Manufacturer: HDCabling
Model Number: Component_SPDIF_to_HDMI_Conver Added to Inventory on: Wednesday 06 May, 2009

Composite AV / RCA to HDMI Converter - Upscale / Upconvert to 720p / 1080p and combines audio to HDMI stream
This Composite to HDMI Scaler / Converter takes Composite (Yellow RCA) Video as input and converts it to HDMI. It will combine the audio input (2 x Red / White RCA) into the HDMI stream to have audio & video via HDMI. It allows older analog devices to be integrated into today's home theatre systems.

Upscalers only change the resolution of the input signal to a higher resolution, digital format and will have no difference in video on the output. This device also functions as an Upconverter (different from upscaler only) and will apply post-processing image algorithms to make the image look smoother and less pixelated by using pixel interpolation, pixel blending, bicubic filtering, de-interlacing & color enhancements. This converter has a built-in processor to do image enhancements. Please note that NO PRODUCT on the market can upscale low quality composite (RCA) video to be the same quality as HD 720p video or 1080p video, but some video improvements can be noticed when using this converter. This converter is primarily used to connect traditional Composite / Yellow RCA devices to a LCD (such as a PC LCD) which does not have Composite / RCA inputs and only HDMI inputs. It is also used to convert the signal to HDMI to allow distribution to other areas of your home or company via HDMI extenders & splitters to display the content on multiple displays.

Features

● Scales up Composite Video to HDMI 720p / 1080p.
● Motion Compensated 3D Wavelet Video Coding Technology is applied to make the converted picture rich in color and more vivid.
● Input audio is integrated into HDMI out as well as pass-through to headphone (3.5mm socket) or amplifier / separate speakers.
● Input video systems - NTSC and PAL is automatically detected and adjusted.

Operation Controls and Functions

● VIDEO IN, AUDIO/R IN and AUDIO/L IN : Composite video (Yellow RCA) and Audio L/R Stereo Input.
● DC 5V : To connect DC 5V power supply (Included with product contents).
● POWER : Power LED
● AUDIO OUT : To connect to any stereo speakers, headphone or amplifier - 3.5mm socket.
● HDMI OUT: To connect to HD display. HD Display needs to support 720p on HDMI port.

Specifications

- Model HDRCAHDMI0101
- Inputs : One Composite Video (Yellow RCA), One AUDIO L/R
- Outputs : One HDMI, One Audio (3.5mm socket)
- Power : DC 5V/2A
- Dimensions : 74(W) × 114(L) × 13(H) mm
- Net Weight: 0.40kg

Connection Diagram

Connection Diagram RCA Composite or Svideo to HDMI_Adapter=

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Related Keywords : rca to hdmi, convert svideo to hdmi, adapter s-video to hdmi, composite to hdmi, dvd player to hdmi connect, Yellow RCA to HDMI connect, Composite upscalar, RCA upscalar, Composite upscaler, RCA upscaler, S-video Upscaler, S-video Up-scaler, Svideo Upscalar
Price: R799.00 Manufacturer: HDCabling
Model Number: Composite_to_HDMI Added to Inventory on: Thursday 23 July, 2009

DVI & SPDIF Digital Coaxial / Optical Toslink Audio to HDMI Converter (Combine signals to HDMI)
This DVI Video + S/PDIF audio to HDMI converter combines your DVI-D digital video with your S/PDIF Digital Coax or Digital Optical Toslink Audio signal from your source devices and outputs them in HDMI format. This allows you to connect your legacy DVI High Def Video sources (PC and Mac's) to your newer HDMI HDTV''s and A/V receivers. No need to replace the high end video player you bought only a few years ago just because it doesn''t support HDMI. Reduces the clutter by combining the digital video and audio output of your device into one HDMI cable.

The supported DVI input signals for Model HDCDVI0101 are :

640x480 @ 60, 72 & 75hz
800x600 @ 60, 72 & 75hz
1024x768 @ 60, 72 & 75hz
1280x1024 @ 60hz
1600x1200 @ 60hz
1280x720 / 720p @ 60hz
1920x1080 / 1080i/p @ 60hz

Other custom resolutions also supported based on support by your display.

The supported HDMI output signals are: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p.

These converters are commonly used to combine video output from your PC Screen and audio from a digital sound card such as the Creative labs soundblaster series into one HDMI signal to be distributed to other areas in your house. Perfect for watching DVD's, Blu-rays or listening to MP3's in all areas of your home or business.

This item is supplied without packaging / boxing directly from the factory to reduce costs to the public. You will not find another quality HDMI product such as this at a better price.

Example diagram below. Additional Splitter and extender on diagram not necessary. DVI + SPDIF to HDMI converter can function as standalone unit between PC / Laptop and display.

Combine DVI and sound from PC to HDMI signal for distribution

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. This item conforms to the HDMI v1.3 specifications described in the section. In general for Blu-ray HDMI v1.0 is required as a minimum and for PS3 / Xbox 360 HDMI v1.2 is recommended as a minimum. HDMI v1.3 exceeds both HDMI v1.0 and v1.2 specifications.

This product is supplied with an autoswitch 110v - 220v AC, 5v 2A DC adapter, but for electrical spike protection and overload protection we highly recommend a replacement adapter such as AC/DC Adapter 5V, 2.5A with Short Circuit & Overload protection.

This product is not supplied with any HDMI, Coaxial or Toslink cables. Cables need to be purchased separately. Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Related Keywords : dvi to hdmi converter, coaxial to hdmi converter, PC to HDMI converter, toslink to HDMI converter, convert PC graphics card to HDMI
Price: R599.00 Manufacturer: HDCabling
Model Number: SPDIF_DVI_Convert_HDMI Added to Inventory on: Monday 16 February, 2009

HDFURY - HDMI to VGA / DVI-D to VGA(HD15) Converter - Allows 1080p HDCP Content on non-HDCP Displays
Tested 100% with all common HDMI sources such as Multichoice HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

HDfury is a revolutionary product that allows you to use any HDMI/DVI device on analog displays like PC monitors, video projectors or older HDTV?s in full resolutions up to 1080p!

If you own a high quality monitor/projector/tv that does not have a HDMI connector you need this device, it will save you from buying an expensive new screen in order to enjoy the 720p or 1080p resolution your display already supports!

HDfury module will transform any "technically able" ANALOG display into a DIGITAL display performing a perfect visual HD @ 720p/1080p from any HDMI/HDCP sources such as DSTV HDPVR, PS3, X360 Elite, HD-DVD & Blu-Ray player, SAT & Cable HDTV setbox, HDMI graphic card, and more.

IMPORTANT NOTE: HDfury receives HDMI resolutions such as 720p (1280x720) and 1080p (1920x1080) and outputs them without changing anything in RGB format. Therefore, your displays VGA input must be able to support a 1280x720 resolution for 720p and 1920x1080 for 1080p. If it does not specifically support those resolutions, then it may not be able to render the picture. Please note, 1280x768 is NOT the same 1280x720 as commonly believed. PLEASE CHECK YOUR DISPLAYS DOCUMENTION TO MAKE SURE IT CAN SUPPORT THE RESOLUTIONS of either 1920 x 1080 (1080p/i), 1280 x 720(720p) or 1024 x 576(576p) on the VGA port. Easiest way to check this is to plug a computer / laptop to the VGA input of your LCD and set the resolution to any of these to check if the display supports it using a 50hz and 60hz refresh rate.

HDFury Diagram

HDfury module will transform any "technically able" ANALOG display into a DIGITAL display performing a perfect visual HD & Full HD fury @ 720p/1080p from any HDMI/HDCP sources such as PS3, X360 Elite, HD-DVD & Blu-Ray player, SAT & Cable HDTV setbox, DSTV HD PVR, HDMI graphic card, and more.

Product Features :

DVI / HDMI(HDCP or non-HDCP) input / convertor module for RGB display (so-called "HDfury 1080prgb").

Specifications :

● DVI-D 24p Female Port Input (100% digital).
● A HDMI to DVI 28AWG Cable can be use to connect to an HDMI source / player / console.
● RGB 4:4:4 (8 bits) digital input (every HDMI source MUST be RGB 4:4:4 compatible).
● Compatible with non-HDCP or HDCP sources.
● Compatible with any RGB Display.
● Directly connect to VGA input.
● Easy to install within a minute. (Plug and Play)
● 10 bits 175MHz triple video DAC - Inter-DAC : 2%
● RGB-H/V Male Port D-SUB 15 Output video analog signals (0,7Vpp over 75 ohms impedance)
● Ultra short Analog links (<1 cm) on the HD fury RGB 1080p for optimal quality.
● DVI video bandwidth in VGA/RVB outputs: 25-165MHz
● DVI Data Rate - Bandwidth 1.65 Gbps (Single link)
● Maximum resolutions: UWXGA (1920x1200) at 60Hz or SXGA 1280x1024) at 85Hz Computer compatible (PC, Mac)
● HDTV ready (480p/576p/720p/1080i/1080p48/50/60 compatible)
● DVI 1.0 compliant / HDMI interoperable and HDCP ready
● HD-DVD and Blue Ray Disc players compatible.
● HDCP compatible with embedded keys loaded.
● Energy management : DVI et VESA DPMS compatible.
● Ultra low power consumption in Standby (3,5mA)
● Maximum power : 0.4A under 5V (at 165MHz pixel clock)
● On-board DC/DC converter (15V to 5V) with extra-low EMI signature
● Power +5V from DVI/HDMI
● Blue LED to display active digital link.
● Low cost solution ? Single IC solution
● Small size : 75x56mm black cabinet
● Installation: the RGB 1080p module is DIRECTLY screwed to the back of the display (where VGA/YUV SUB-D plugs stand).
● Shortest RGB analog video link as possible
● HDCP rules compliant: no end-user access to decrypted analog video. Once screwed, this module becomes "a part of the display itself". ● Professional factory made (mass-production) using pick/place and reflow/wave solder pro. equipment.
● Gold Platted connectors, tracks and material

Related Keywords : hdmi to rgb, dvi to vga, hdmi to vga, dvi to rgb, hdcp compliant hdmi, hdfury blue edition, hd fury, hdfury component,
Price: R1,199.00 Manufacturer:
Model Number: HD_Fury_Blue_Edition_HDMI_to_V Added to Inventory on: Tuesday 09 September, 2008

HDFURY 2 HDMI to Component (YPbPr) or VGA Converter - Blue Edition (Basic Kit)

Upgrade any TV/projector by adding an HDCP compliant HDMI digital video input! Works with any TV that accepts either Component (YPbPr/YCbCr) or RGB/VGA! Don't be stuck watching Blu-ray, DVD, Satellite/Cable at only 480p! Add an HDfury2, allowing you to watch hi-def content at up to FULL HD 1080p resolution!  

HDfury2 is the world smallest and most powerful HDCP deciphering converter ever built! The result is a crystal clear image that is perfectly centered (in component mode) with amazing color depth. It features VGA and Component video output, Analog & Optical sound output, and add-on accessories too ...

Why do I need HDfury2?

How old is your HDTV or projector? If it was bought before 2005 it does not have an HDMI input. This means that you'll never be able to use the full potential of your expensive CRT projector, digital projector, plasma display, or PC screen with new sources like the PS3, Xbox360, Blu-ray players, Cable TV / Satellite boxes, or PC graphics cards at up to 1080p FULL HD resolution.

Without an HDMI input your display will be limited to 480p in most cases - that's only 1/6th the resolution of 1080p FULL HD! You need HDfury2 to unlock the full potential of your display! Why buy an expensive new HDTV when your existing one works perfectly well? Enhance your display's compatibly and value with HDfury2!

Designed by a group of home theater videophiles, the HDfury2 delivers a razor sharp picture with unprecedented colour from HDMI sources, supporting all resolutions up to 1080p FULL HD. The picture quality improvement when using HDfury2 is immediately obvious, providing an amazingly clear and detailed picture!

Will HDfury2 work for me?

1. Does your display support at least one of the following resolutions: 480i, 480p, 576i, 576p, 720p, 1080i, or 1080p?
2. Does it have a Component or RGB (PC/VGA) input connector? (some examples shown below) 

Component Input (Component Cable Included) VGA Input BNC Input

Component / YPbpr Connectors  VGA Connector / RGBHV  BNC Connectors

HDfury2 Specifications:

  • INPUT: Digital HDMI 19p FEMALE Port (100% digital)
  • OUTPUT: Analog RGBHV or Component (YPbPr/YCbCr) via HD-15 D-Sub (VGA style) MALE connector
  • Supports *ANY* resolution and refresh rate in RGB mode up to 1920x1080/60Hz. Includes all of the popular HDTV resolutions including: 480i/480p/576i/576p/720p/1080i/1080p24/48/50/60
  • Supports the following HDTV resolutions in component mode: 480i/480p/576i/576p/720p/1080i/1080p24/48/50/60 compatible
  • User Selectable RGBHV / Component (YPbPr/YCbCr) output with a switch
  • A HDMI -> HDMI cable is used to connect to an HDMI source
  • RGB 4:4:4 (8 bits) digital input
  • YCbCr 4:4:4 or 4:2:2 digital input
  • Compatible with non-HDCP (DVI-D) or HDCP sources
  • Compatible with any RGB Display
  • Compatible with any YUV Display
  • Directly connects to a display's VGA (RGB) 15 pin D-Sub input
  • Directly connects to a display's Component (YPbPr/YCbCr) input using included breakout cable
  • Takes less then 1 minute to install (Plug & Play)
  • 11bit 200MHz data processing
  • Triple 11bit 200Mhz video DAC
  • RGB-H/V Male Port D-SUB 15 Output video analog signals (0.7Vpp (RGB) / 1Vpp (YPbPr) over 75 ohms impedance)
  • Ultra short Analog links (<1 cm) on the HDfury2 for optimal quality
  • HDMI video bandwidth: 25-165MHz
  • HDMI Data Rate - Bandwidth 1.5 Gbit/sec (Single link)
  • Supports all HD/SDTV formats from 1080p down to 480i
  • HDTV ready (480i/480p/576i/576p/720p/1080i/1080p48/50/60 compatible)
  • DVI 1.0 compliant
  • HDMI 1.1 and 1.2 ready
  • HDMI 1.3 interoperable
  • HDCP compatible with embedded keys loaded
  • HDCP ready
  • Reprogrammable Firmware (with specialized tools)
  • Screen position adjustable through Firmware and Custom Profile
  • Accepts third party accessories on output such as the GAMMA-X (Gamma Correction)
  • Automatic Input Format Detection: Digital YCbCr and RGBHV
  • Full dynamic range for all input modes to maximize the level of detail
  • Automatically switches color-spaces for both HDTV (Rec.709) and SDTV (Rec.601)
  • Precise black levels - no black crush in any standard mode
  • Stereo High-Quality Analog Audio Output
  • Stereo High-Quality Digital/Optical Audio Output (S/PDIF format)
  • HD-DVD and Blu-Ray Disc player compatible
  • Playstation3 and Xbox360 compatible
  • Satellite and Cable set-top box compatible for HDTV
  • HDMI or DVI-D video graphics card compatible
  • HDCP compatible with embedded keys loaded
  • Energy management : DVI and VESA DPMS compatible
  • Ultra low power consumption in Standby (3,5mA)
  • Maximum power : 0.37A under 5V (at 1080p/60)
  • On-board DC/DC converter (1.8V) with extra-low EMI signature
  • Power +5V from DVI/HDMI
  • Blue LED to display active digital link and power status
  • Small size : 75x56mm cabinet
  • 100% ROHS compliant (Restriction of Hazardous Substances Directive)
  • Installation: The HDfury2 module may be DIRECTLY screwed to the back of the display into the VGA SUB-D plug.
  • Shortest RGB and Component (YPbPr) analog video link as possible.
  • HDCP rules compliant: No end-user access to decrypted analog video. Once screwed, this module becomes "a part of the display itself".
  • Professional factory made (mass-production) using pick/place and reflow/wave solder pro equipment.
  • Gold Plated connectors, tracks and material
  • Full aluminium case with thermal dissipation
  • (Optional) +5v input and power supply
  • EDID detective feature: EDID eprom can be reprogrammed using a computer through the graphics card (feature reserved for professionals)
  • Internal EDID EEPROM with complete CEA861 extension block
  • One year warranty
Price: R2,199.00 Manufacturer: HDCabling
Model Number: HDFURY_2_Basic_Kit Added to Inventory on: Thursday 11 March, 2010

HDFURY Pro - HDMI to Component / YPbPr or VGA Converter - Same functions as HDFURY2, supports up to 1080p
Tested 100% with all common HDMI sources such as Multichoice HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

This product is similar to the HDFURY2. It will convert video & audio from a HDMI source to Component (3-RCA / YPbPr) or VGA / HD15 / D-Sub (15 pins, 3 rows of 5 pins each) with separate Toslink Digital Audio or Stereo RCA output. Please enlarge the picture on the right to see the different outputs.

Please note that no additional cables are supplied with this converter and the cable bundle at VGA, Component and analog audio cable bundle are commonly used with this product.

Features

● Two HDMI input signals that converts to one YPbPr+SPDIF or VGA+SPDIF.
● Supported video input : HDMI 1080P
● Supported audio output : SPDIF (Optical Toslink) & R/L Analog Stereo 3.5mm jack.
● Supported output :
- YPbpr : 480i/50HZ, 480i/60HZ, 720i/50HZ, 720i/60HZ, 1080i/50HZ, 1080i/60HZ
- VGA: 480P/50HZ, 480P/60HZ, 720P/50HZ, 720P/60HZ, 1080P/50HZ, 1080P/60HZ
● Supports the same format as input. No Upscaling or downscaling of resolutions. Your end display needs to supported the resolution on the Component or VGA input from the source device e.g for 720p the resolution 1280 x 720 needs to be supported on display which is a 16:9 aspect ratio, for 1080p inpit, 1920 x 1080 needs to be supported on the display device YPbPr or VGA input.
● HDCP 1.2 protocol compliant.
● Installs in minutes
● Need DC5V / 0.8A power supply. Adapter is supplied with converter.

Connection and Operation Instructions

1. Connect one cable from HDMI Source / Player into the Converter HDMI input.
2. Connect VGA+SPDIF or YPbPr+SPDIF from monitor or projector into Converter outputs. Only one output at a time can be used.
3. Connect 5V power supply to the converter.

Specifications

● Model HDFURY PRO
● HDMI resolution : 1080P
● Input Video signal : 0.5~1.5Volts p-p
● Input DDC signal : 5Volts p-p (TTL)
● VGA or YPbPr output. Support up to UXGA and 720p/1080i/1080p (60Hz)
● Audio output : R/L Analog and optical
● Max transmission bandwidth : 5.1Gbps
● Max working current : 600mA
● Power adapter format - Input : AC (50HZ, 60HZ) 100V-240V; Output : DC5V / 0.8A
● Operating Temperature range : (-15 to +55℃)
● Operating Humidity range : 5 to 90%RH (No Condensation)
● Dimensions : (L x W x H) - 174 x 70 x 20 (mm)
● Weight : 750g

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Related Keywords : HDMI to VGA, HDMI to D-sub, HDMI to RGB, RGB from HDMI Converter, HDMI to YPbPr Converter, HDMI to 3-RCA Converter, HDMI to Component video converter, HDFURY 2 video Converter, Component from HDMI Converter
Price: R1,249.00 Manufacturer: HDCabling
Model Number: HDFURY_PRO_CONVERTER Added to Inventory on: Wednesday 03 February, 2010

HDMI Balun / Extender over CAT5e / CAT6 (30 Meter 1080p/50 Meter 720p-1080i) - HDCP 1.2, HDMI v1.3
In some cases depending on length of CAT5e/CAT6 STP Cable installed this extender does not require external power and acquires power directly from HDMI 5volt port power provided on all players / sources and LCD's.

Tested 100% with all common HDMI sources such as HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

HDMI carries 2 channels : TMDS (Video/Audio & sync information) / CAT5e-1 Port on HDMI Extender and DDC (5 volt, HDCP information) / CAT5e-2 Port on HDMI Extender. More info at HDMI Signal Explained. Due to 100% stability needed on the TMDS / CAT5e-1 port channel for sync information CAT5e or CAT6 Shielded Twisted Pair (STP) is required to ensure no sync losses occur. CAT5e / STP UTP can be used for the DDC / CAT5e-2 port channel, but not recommended at all for HDMI Equipment and STP should be used for a stable installation. Basically you have one cable that is highly critical for video integrity and timing where the opposite cable is not as frequency-dependent, handling only the EDID, HDCP, power, hot plug and ground.

CAT5e Shielded Twisted Pair Cables at CAT5e Shielded Twisted Pair (STP) 350Mhz ISA/IEC 11801 Cable, CAT7 SSTP Cables at CAT7 SSTP Full Copper Ethernet Cable up to 10Gb/s. CAT5e FTP / STP depending on quality of cable (Full Copper cables) can be installed for resolutions up to 1080p depending on color depth, refresh rates & equipment signal quality, but only recommended up to 720p/1080i. For 1080p transmissions full copper CAT6e FTP / STP or CAT7 SSTP are required.

HDMI CAT5e 30m Extender Wiring Diagram

Please ensure cables are terminated according to 568A or 568B standard as in diagram below depending on CAT5e / CAT6 STP cable type and properly grounded via the ripcord wire inside STP cables. Grounding the cable will also ensure better protection against voltage spikes. STP cables shields better against nearby EMI.

STP or UTP 568B Termination/Crimping Standard

HDMI devices (any source / player, LCD, Plasma etc) have different results when inserting HDMI Repeater devices depending on the equipment you are using (a repeater device is any switch / splitter / extender etc). Compatibility cannot be always guaranteed due to some suppliers using revoked HDCP keys. This is normally seen on older HDTV's and occurs on < 5% of installations. Please ensure to get confirmation from the manufacturer of your source / player / LCD that the specific player or LCD can communicate via a HDMI Repeater (Any switch, digital receiver, amplifier, extender, splitter etc). Some source devices might not allow any HDMI device between itself and the LCD and will only function via a direct HDMI cable to the LCD. Your display or source manufacturer can confirm if their product supports the functions required.

Features :

● CAT5e / CAT6 cabling can fit into smaller areas than HDMI because of the head size of the HDMI cable (From 16 to 19mm) compared to 4-5mm for CAT5e / CAT6 STP Cables.
● One Sender & One Receiver module included.
● Uses CAT5e / CAT6 Shielded Twisted Pair to substitute HDMI cable to achieve long distance transmissions.
● Follow the standard of IEEE-568B when installing and terminating UTP / STP Cables to ensure minimum signal loss over longer distances.
● Transmission distance reaches up to 30 meters (1080P) and 50 meter 1080i / 720p. Transmission distance may vary on type of equipment used, quality of CAT5e / CAT6 cables used, quality of RJ45 shielded connectors and crimping quality of installation of RJ45 connectors.
● Auto-adjustment of feedback, equalization and amplify. Please ensure that 2 of the same length CAT5e / CAT6 STP cables are installed
● Compact size.
● Signaling rates up to 2.25Gbits in support of 1080P display.
● HDCP 1.2 compliant.

Specifications :

● Model HDMICAT30TX&RX

Signal Inputs/Output

● Input Video Signal : 0.5 -1.0 volts p-p
● Input DDC Signal : 5 volts p-p (TTL)
● Maximum Single Link Range : 1920X1080, 1080P
● Output Video : HDMI 1.3
● Video format supported : DTV/HDTV, 1080P /1080i / 720P / 576P / 480P / 576i / 480i

Mechanical

● Power Consumption : 5Watts (max.)
● Dimensions : 45mm W x 25mm H x 81mm D ● Warranty : Limited Warranty 1 Year Parts and Labour

Environmental

● Operating Temperature : 0 to +70C;
● Operating Humidity : 10% to 85 % RH
● Storage Temperature :-10C to +80C
● Storage Humidity : 5% to 95 % RH (no condensation)

Regulatory Approvals
● Converter Unit : FCC,CE,UL
● Power Supply : UL,CE,FCC
Accessories Adapter
● User Manual included

Connection and operating instructions :

1. Ensure all Home Entertainment Equipment has been powered off (Including source / player and display device)
2. Connect the HDMI input sources such as:Multichoice HDPVR, Playstation 3, Xbox 360, HD-DVD, STB etc. into the Sender unit via an HDMI to HDMI cable.
3. Connect two CAT-5e / CAT-6 / CAT-7 STP cables to both the outputs of the sender unit and the inputs of the receiver unit using IEEE-568B wiring standard for the CAT cabling.
4. Connect the HDMI output display device such as LCD, Plasma or projector to the receiver unit via a HDMI to HDMI Cable.
5. Power-on LCD & source device (and any other HDMI distribution equipment inbetween to ensure a path exists between source and display to negotiate a HDMI handshake).

In general for Blu-ray HDMI v1.0 is required as a minimum and for PS3 / Xbox 360 HDMI v1.2 is recommended as a minimum. HDMI v1.3 exceeds both HDMI v1.0 and v1.2 specifications.

These Extenders can be cascaded to reach unlimited transmission lengths e.g to double the maximum length specification of the extender connect another HDMI Extender set. If you need to extend your HDMI signal for less than 20 meters and the cable does not run through conduit (which has limited space for the HDMI connector on a standard cable) we recommend that you use an HDMI Equalizer / Repeater with standard HDMI Cables

Most HDMI Sources / Players / Gaming Consoles use an encryption algorithm called HDCP which can cause signal issues. To troubleshoot audio / video issues (HDMI Handshake problems) regarding HDMI distribution see the problems and best practises guide at http://www.hdcabling.co.za/hdcp_hdmi_handshake_troubleshooting_guidelines.php

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

No HDMI / CAT5e / CAT6 cables are included with this product and must be purchased separately.

Related Keywords : hdmi extension, hdmi extension cable, hdmi cat5 extender, hdmi over network cable, hdmi extend, HDMI Balun
Price: R529.00 Manufacturer: HDCabling
Model Number: HDMI_Extender_30_Meters_CAT5 Added to Inventory on: Friday 04 July, 2008

HDMI Balun / Extender over CAT6 / CAT7 (60 Meter 1080p/100 Meter 720p-1080i) - HDCP 1.2, HDMI v1.3
Tested 100% with all common HDMI sources such as HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

HDMI carries 2 channels : TMDS (Video/Audio & sync information) / CAT5e-1 Port on HDMI Extender and DDC (5 volt, HDCP information) / CAT5e-2 Port on HDMI Extender. More info at HDMI Signal Explained. Due to 100% stability needed on the TMDS / CAT5e-1 port channel for sync information CAT5e or CAT6 Shielded Twisted Pair (STP) is required to ensure no sync losses occur. CAT5e / STP UTP can be used for the DDC / CAT5e-2 port channel, but not recommended at all for HDMI Equipment and STP should be used for a stable installation. Basically you have one cable that is highly critical for video integrity and timing where the opposite cable is not as frequency-dependent, handling only the EDID, HDCP, power, hot plug and ground.

CAT5e Shielded Twisted Pair Cables at CAT5e Shielded Twisted Pair (STP) 350Mhz ISA/IEC 11801 Cable, CAT7 SSTP Cables at CAT7 SSTP Full Copper Ethernet Cable up to 10Gb/s. CAT5e FTP / STP depending on quality of cable (Full Copper cables) can be installed for resolutions up to 1080p depending on color depth, refresh rates & equipment signal quality, but only recommended up to 720p/1080i. For 1080p transmissions full copper CAT6e FTP / STP or CAT7 SSTP are required.

HDMI Super Extender 60 Meter CAT6 Wiring Diagram

Please ensure cables are terminated according to 568A or 568B standard as in diagram below depending on CAT5e / CAT6 STP cable type and properly grounded via the ripcord wire inside STP cables. Grounding the cable will also ensure better protection against voltage spikes. STP cables shields better against nearby EMI.

STP or UTP 568B Termination/Crimping Standard

HDMI devices (any source / player, LCD, Plasma etc) have different results when inserting HDMI Repeater devices depending on the equipment you are using (a repeater device is any switch / splitter / extender etc). Compatibility cannot be always guaranteed due to some suppliers using revoked HDCP keys. This is normally seen on older HDTV's and occurs on < 5% of installations. Please ensure to get confirmation from the manufacturer of your source / player / LCD that the specific player or LCD can communicate via a HDMI Repeater (Any switch, digital receiver, amplifier, extender, splitter etc). Some source devices might not allow any HDMI device between itself and the LCD and will only function via a direct HDMI cable to the LCD. Your display or source manufacturer can confirm if their product supports the functions required.

Features :

● CAT5e / CAT6 cabling can fit into smaller areas than HDMI because of the head size of the HDMI cable (From 16 to 19mm) compared to 4-5mm for CAT5e / CAT6 STP Cables.
● One Sender & One Receiver module included.
● Uses CAT5e / CAT6 Shielded Twisted Pair to substitute HDMI cable to achieve long distance transmissions. .
● Follow the standard of IEEE-568B when installing and terminating UTP / STP Cables to ensure minimum signal loss over longer distances.
● Transmission distance reaches up to 60 meters (1080P) and 100 meter 1080i / 720p. Transmission distance may vary on type of equipment used, quality of CAT5e / CAT6 cables used, quality of RJ45 shielded connectors and crimping quality of installation of RJ45 connectors.<.
● Auto-adjustment of feedback, equalization and amplify. Please ensure that 2 of the same length CAT5e / CAT6 STP cables are installed
● Compact size.
● Signaling rates up to 2.25Gbits in support of 1080P display.
● HDCP 1.2 compliant.

Specifications :

● Model HDMICAT60TX&RX

Signal Inputs/Output

● Input Video Signal : 0.5 -1.0 volts p-p
● Input DDC Signal : 5 volts p-p (TTL)
● Maximum Single Link Range : 1920X1080, 1080P
● Output Video : HDMI 1.3
● Video format supported : DTV/HDTV, 1080P /1080i / 720P / 576P / 480P / 576i / 480i

Mechanical

● Power Consumption : 5Watts (max.)
● Dimensions : 45mm W x 25mm H x 81mm D ● Warranty : Limited Warranty 1 Year Parts and Labour

Environmental

● Operating Temperature : 0 to +70C;
● Operating Humidity : 10% to 85 % RH
● Storage Temperature :-10C to +80C
● Storage Humidity : 5% to 95 % RH (no condensation)

Power Requirement

● External Power Supply : 5V DC@2A (included in purchase)
Regulatory Approvals
● Converter Unit : FCC,CE,UL
● Power Supply : UL,CE,FCC
Accessories Adapter
● AC Power Adapter : AC/DC Adapter with SA 2-pin Plug
● User Manual included

Connection and operating instructions :

1. Ensure all Home Entertainment Equipment has been powered off (Including source / player and display device)
2. Connect the HDMI input sources such as Multichoice HDPVR, Playstation 3, Xbox 360, HD-DVD, STB etc. into the Sender unit via an HDMI to HDMI cable.
3. Connect two CAT-5e / CAT-6 / CAT-7 STP cables to both the outputs of the sender unit and the inputs of the receiver unit using IEEE-568B wiring standard for the CAT cabling.
4. Connect the HDMI output display device such as LCD, Plasma or projector to the receiver unit via a HDMI to HDMI Cable.
5. Plug in the 5v, 2A power into the receiver unit.

In general for Blu-ray HDMI v1.0 is required as a minimum and for PS3 / Xbox 360 HDMI v1.2 is recommended as a minimum. HDMI v1.3 exceeds both HDMI v1.0 and v1.2 specifications.

These Extenders can be cascaded to reach unlimited transmission lengths e.g to double the maximum length specification of the extender connect another HDMI Extender set.

If you need to extend your HDMI signal for less than 20 meters and the cable does not run through conduit (which has limited space for the HDMI connector on a standard cable) we recommend that you use an HDMI Equalizer / Repeater with standard HDMI Cables

Most HDMI Sources / Players / Gaming Consoles use an encryption algorithm called HDCP which can cause signal issues. To troubleshoot audio / video issues (HDMI Handshake problems) regarding HDMI distribution see the problems and solutions guide at http://www.hdcabling.co.za/hdcp_hdmi_handshake_troubleshooting_guidelines.php

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

No HDMI / CAT-5e / CAT-6 / CAT-7 cables are included with this product and must be purchased separately.



Related Keywords : hdmi extension, hdmi extension cable, hdmi cat5 extender, hdmi over network cable, hdmi extend, longer hdmi lengths, increase hdmi length, HDMI Balun
Price: R799.00 Manufacturer: HDCabling
Model Number: HDMI_Extender_50_Meters_CAT6 Added to Inventory on: Friday 04 July, 2008

HDMI Extender over CAT5e/CAT6 / Mountable Wallplate Balun (up to 25 Meter 1080p / >30 Meter 720p-1080i)
In some cases depending on length of CAT5e/CAT6 STP Cable installed this extender does not require external power and acquires power directly from HDMI 5volt port power provided on all players / sources and LCD's.

Tested 100% with all common HDMI sources such as HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

HDMI carries 2 channels : TMDS (Video/Audio & sync information) / CAT5e-1 Port on HDMI Extender and DDC (5 volt, HDCP information) / CAT5e-2 Port on HDMI Extender. More info at HDMI Signal Explained. Due to 100% stability needed on the TMDS / CAT5e-1 port channel for sync information CAT5e or CAT6 Shielded Twisted Pair (STP) is required to ensure no sync losses occur. CAT5e / STP UTP can be used for the DDC / CAT5e-2 port channel, but not recommended at all for HDMI Equipment and STP should be used for a stable installation. Basically you have one cable that is highly critical for video integrity and timing where the opposite cable is not as frequency-dependent, handling only the EDID, HDCP, power, hot plug and ground.

CAT5e Shielded Twisted Pair Cables at CAT5e Shielded Twisted Pair (STP) 350Mhz ISA/IEC 11801 Cable, CAT7 SSTP Cables at CAT7 SSTP Full Copper Ethernet Cable up to 10Gb/s. CAT5e FTP / STP depending on quality of cable (Full Copper cables) can be installed for resolutions up to 1080p depending on color depth, refresh rates & equipment signal quality, but only recommended up to 720p/1080i. For 1080p transmissions full copper CAT6e FTP / STP or CAT7 SSTP are required.

HDMI CAT6e Wallplate Balun Wiring Diagram

Please ensure cables are terminated according to 568A or 568B standard as in diagram below depending on CAT5e / CAT6 STP cable type and properly grounded via the ripcord wire inside STP cables. Grounding the cable will also ensure better protection against voltage spikes. STP cables shields better against nearby EMI.

STP or UTP 568B Termination/Crimping Standard

HDMI devices (any source / player, LCD, Plasma etc) have different results when inserting HDMI Repeater devices depending on the equipment you are using (a repeater device is any switch / splitter / extender etc). Compatibility cannot be always guaranteed due to some suppliers using revoked HDCP keys. This is normally seen on older HDTV's and occurs on < 5% of installations. Please ensure to get confirmation from the manufacturer of your source / player / LCD that the specific player or LCD can communicate via a HDMI Repeater (Any switch, digital receiver, amplifier, extender, splitter etc). Some source devices might not allow any HDMI device between itself and the LCD and will only function via a direct HDMI cable to the LCD. Your display or source manufacturer can confirm if their product supports the functions required.

Features :

● CAT5e / CAT6 cabling can fit into smaller areas than HDMI because of the head size of the HDMI cable (From 16 to 19mm) compared to 4-5mm for CAT5e / CAT6 STP Cables.
● One Sender & One Receiver wallplate included.
● Uses CAT5e / CAT6 Shielded Twisted Pair to substitute HDMI cable to achieve long distance transmissions.
● Follow the standard of IEEE-568B when installing and terminating UTP / STP Cables to ensure minimum signal loss over longer distances.
● You will need to attach transmitter and receiver to a wall bracket to ensure neater installation or any other mountable surface. None are provided. You can acquire these at a local hardware store similar to electrical wall socket casing.
● Transmission distance reaches up to 25 meters (1080P) and > 30 meter 1080i / 720p, > 40 meters 480p. Transmission distance may vary on type of equipment used, quality of CAT5e / CAT6 cables used, quality of RJ45 shielded connectors and crimping quality of installation of RJ45 connectors.
● Auto-adjustment of feedback, equalization and amplify. Please ensure that 2 of the same length CAT5e / CAT6 STP cables are installed
● Compact size.
● Signaling rates up to 2.25Gbits in support of 1080P display.
● HDCP 1.2 compliant.

Specifications :

● Model HDMIWALLPLATE30TX&RX

Signal Inputs/Output

● Input Video Signal : 0.5 -1.0 volts p-p
● Input DDC Signal : 5 volts p-p (TTL)
● Maximum Single Link Range : 1920X1080, 1080P
● Output Video : HDMI 1.3
● Video format supported : DTV/HDTV, 1080P /1080i / 720P / 576P / 480P / 576i / 480i

Mechanical

● Power Consumption : 5Watts (max.)
● Dimensions : 45mm W x 25mm H x 81mm D ● Warranty : Limited Warranty 1 Year Parts and Labour

Environmental

● Operating Temperature : 0 to +70C;
● Operating Humidity : 10% to 85 % RH
● Storage Temperature :-10C to +80C
● Storage Humidity : 5% to 95 % RH (no condensation)

Regulatory Approvals

● Converter Unit : FCC,CE,UL
● Power Supply : UL,CE,FCC
Accessories Adapter
● User Manual included

Connection and operating instructions :

1. Ensure all Home Entertainment Equipment has been powered off (Including source / player and display device)
2. Connect the HDMI input sources such as:Multichoice HDPVR, Playstation 3, Xbox 360, HD-DVD, STB etc. into the Sender unit via an HDMI to HDMI cable.
3. Connect two CAT-5e / CAT-6 / CAT-7 STP cables to both the outputs of the sender unit and the inputs of the receiver unit using IEEE-568B wiring standard for the CAT cabling.
4. Connect the HDMI output display device such as LCD, Plasma or projector to the receiver unit via a HDMI to HDMI Cable.
5. Power-on LCD & source device (and any other HDMI distribution equipment inbetween to ensure a path exists between source and display to negotiate a HDMI handshake).

In general for Blu-ray HDMI v1.0 is required as a minimum and for PS3 / Xbox 360 HDMI v1.2 is recommended as a minimum. HDMI v1.3 exceeds both HDMI v1.0 and v1.2 specifications.

These Extenders can be cascaded to reach unlimited transmission lengths e.g to double the maximum length specification of the extender connect another HDMI Extender set. If you need to extend your HDMI signal for less than 20 meters and the cable does not run through conduit (which has limited space for the HDMI connector on a standard cable) we recommend that you use an HDMI Equalizer / Repeater with standard HDMI Cables

Most HDMI Sources / Players / Gaming Consoles use an encryption algorithm called HDCP which can cause signal issues. To troubleshoot audio / video issues (HDMI Handshake problems) regarding HDMI distribution see the problems and best practises guide at http://www.hdcabling.co.za/hdcp_hdmi_handshake_troubleshooting_guidelines.php

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

No HDMI / CAT5e / CAT6 cables are included with this product and must be purchased separately.

Related Keywords : hdmi extension, hdmi extension cable, hdmi cat5 extender, hdmi over network cable, hdmi extend, HDMI Balun
Price: R599.00 Manufacturer: HDCabling
Model Number: HDMI_Wallplate_Balun_25m Added to Inventory on: Monday 21 September, 2009

HDMI Inline Extender / Repeater / Active Equalizer - Extend HDMI to HDMI cable signal up to 40 Meters
An HDMI Equalizer allows you to transmit high definition audio/video streams across long distance without any digital degradation. It also corrects any digital error in the stream and provides 40dB equalization to compenstate for any cable transmission loss. It will ensure a crystal clear HDTV picture by stopping any digital noise (sparkles).

Specifications :

● Compatible with HDTV Resolutions 480i, 480p, 720p, 1080i, and 1080p.
● This is the best Low Cost Solution to the Extra Long Cable Length Problem.
● Female-Female Adapter HDMI ports.
● Video extended bandwidth: 1.65 GHz
● Actual bandwidth: 1.6 GHz
● Input video signal level: 1.2 volts p-p
● Inputs the DDC signal level: 5 volts p-p (TTL)

Equalizes the HDMI Signal from any HDMI device to allow for HDMI cables to be extended up to 35 meters compared to standard up to 15 meter ranges.

This extender uses the power on the HDMI Bus to equalize the Signal.

Maximum Data Cable Length Based on American Wire Gauge (AWG Rating) and resolution used:

● 0 to 40 Meters Over HDMI-Cable, 24 AWG, 720p/1080i
● 0 to 30 Meters Over HDMI-Cable, 26 AWG, 720p/1080i
● 0 to 25 Meters Over HDMI-Cable, 24 AWG, 1080p

For lengths exceeding 30 meters we recommend either of the following products HDMI Extender CAT-5e / CAT-6 w/Tx + Rx (30m 1080p) or HDMI Super Extender CAT6 w/Tx + Rx (50m-60m 1080p)

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. This item conforms to the HDMI v1.3 specifications described in the section. In general for Blu-ray HDMI v1.0 is required as a minimum and for PS3 / Xbox 360 HDMI v1.2 is recommended as a minimum. HDMI v1.3 exceeds both HDMI v1.0 and v1.2 specifications.

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON.

HDMI Repeater Extender Equalizer Wiring Diagram

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this device and for alternative wiring options.

Related Keywords : hdmi extension, hdmi signal booster, hdmi extend, hdmi repeater, hdmi equalizer, hdmi signal amplifier, long hdmi cables
Price: R349.00 Manufacturer: HDCabling
Model Number: HDMI_Repeater_Equalizer Added to Inventory on: Monday 25 August, 2008

HDMI mini-Balun / Extender over CAT5e / CAT6 (30 Meter 1080p/50 Meter 720p-1080i) - HDCP 1.2, HDMI v1.3
This device does not require external power and acquires power directly from HDMI 5volt port power provided on all players / sources and LCD's. The Transmitter / receiver plugs directly into the source device or display and does not need any additional HDMI cables.

HDMI mini Extender Balun over CAT5e Wiring Diagram

Tested 100% with all common HDMI sources such as HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

HDMI carries 2 channels : TMDS (Video/Audio & sync information) / CAT5e-1 Port on HDMI Extender and DDC (5 volt, HDCP information) / CAT5e-2 Port on HDMI Extender. More info at HDMI Signal Explained. Due to 100% stability needed on the TMDS / CAT5e-1 port channel for sync information CAT5e or CAT6 Shielded Twisted Pair (STP) is required to ensure no sync losses occur. CAT5e / STP UTP can be used for the DDC / CAT5e-2 port channel, but not recommended at all for HDMI Equipment and STP should be used for a stable installation. Basically you have one cable that is highly critical for video integrity and timing where the opposite cable is not as frequency-dependent, handling only the EDID, HDCP, power, hot plug and ground.

CAT5e Shielded Twisted Pair Cables at CAT5e Shielded Twisted Pair (STP) 350Mhz ISA/IEC 11801 Cable, CAT7 SSTP Cables at CAT7 SSTP Full Copper Ethernet Cable up to 10Gb/s. CAT5e FTP / STP depending on quality of cable (Full Copper cables) can be installed for resolutions up to 1080p depending on color depth, refresh rates & equipment signal quality, but only recommended up to 720p/1080i. For 1080p transmissions full copper CAT6e FTP / STP or CAT7 SSTP are required.

Please ensure cables are terminated according to 568A or 568B standard as in diagram below depending on CAT5e / CAT6 STP cable type and properly grounded via the ripcord wire inside STP cables. Grounding the cable will also ensure better protection against voltage spikes. STP cables shields better against nearby EMI.

STP or UTP 568B Termination/Crimping Standard

HDMI devices (any source / player, LCD, Plasma etc) have different results when inserting HDMI Repeater devices depending on the equipment you are using (a repeater device is any switch / splitter / extender etc). Compatibility cannot be always guaranteed due to some suppliers using revoked HDCP keys. This is normally seen on older HDTV's and occurs on < 5% of installations. Please ensure to get confirmation from the manufacturer of your source / player / LCD that the specific player or LCD can communicate via a HDMI Repeater (Any switch, digital receiver, amplifier, extender, splitter etc). Some source devices might not allow any HDMI device between itself and the LCD and will only function via a direct HDMI cable to the LCD. Your display or source manufacturer can confirm if their product supports the functions required.

Features :

● CAT5e / CAT6 cabling can fit into smaller areas than HDMI because of the head size of the HDMI cable (From 16 to 19mm) compared to 4-5mm for CAT5e / CAT6 STP Cables.
● One Sender & One Receiver module included.
● Uses CAT5e / CAT6 Shielded Twisted Pair to substitute HDMI cable to achieve long distance transmissions.
● Follow the standard of IEEE-568B when installing and terminating UTP / STP Cables to ensure minimum signal loss over longer distances.
● Transmission distance reaches up to 30 meters (1080P) and 50 meter 1080i / 720p. Transmission distance may vary on type of equipment used, quality of CAT5e / CAT6 cables used, quality of RJ45 shielded connectors and crimping quality of installation of RJ45 connectors.
● Auto-adjustment of feedback, equalization and amplify. Please ensure that 2 of the same length CAT5e / CAT6 STP cables are installed
● Compact size.
● Signaling rates up to 2.25Gbits in support of 1080P display.
● HDCP 1.2 compliant.

Specifications :

● Model mini-HDMICAT6-30m

Signal Inputs/Output

● Input Video Signal : 0.5 -1.0 volts p-p
● Input DDC Signal : 5 volts p-p (TTL)
● Maximum Single Link Range : 1920X1080, 1080P
● Output Video : HDMI 1.3
● Video format supported : DTV/HDTV, 1080P /1080i / 720P / 576P / 480P / 576i / 480i

Mechanical

● Power Consumption : 5Watts (max.)
● Dimensions : 46mm W x 83mm H x 23mm D ● Warranty : Limited Warranty 1 Year Parts and Labor

Environmental

● Operating Temperature : 0 to +70C;
● Operating Humidity : 10% to 85 % RH
● Storage Temperature :-10C to +80C
● Storage Humidity : 5% to 95 % RH (no condensation)

Accessories

● Units uses power from HDMI port on source and LCD 5v+. No external power needed.
● User Manual included

Connection and operating instructions :

1. Ensure all Home Entertainment Equipment has been powered off (Including source / player and display device)
2. Connect the HDMI input sources such as:Multichoice HDPVR, Playstation 3, Xbox 360, HD-DVD, STB etc. into the Sender unit via an HDMI to HDMI cable.
3. Connect two CAT-5e / CAT-6 / CAT-7 STP cables to both the outputs of the sender unit and the inputs of the receiver unit using IEEE-568B wiring standard for the CAT cabling.
4. Connect the HDMI output display device such as LCD, Plasma or projector to the receiver unit via a HDMI to HDMI Cable.
5. Power-on LCD & source device (and any other HDMI distribution equipment inbetween to ensure a path exists between source and display to negotiate a HDMI handshake).

In general for Blu-ray HDMI v1.0 is required as a minimum and for PS3 / Xbox 360 HDMI v1.2 is recommended as a minimum. HDMI v1.3 exceeds both HDMI v1.0 and v1.2 specifications.

These Extenders can be cascaded to reach unlimited transmission lengths e.g to double the maximum length specification of the extender connect another HDMI Extender set. If you need to extend your HDMI signal for less than 20 meters and the cable does not run through conduit (which has limited space for the HDMI connector on a standard cable) we recommend that you use an HDMI Equalizer / Repeater with standard HDMI Cables

Most HDMI Sources / Players / Gaming Consoles use an encryption algorithm called HDCP which can cause signal issues. To troubleshoot audio / video issues (HDMI Handshake problems) regarding HDMI distribution see the problems and best practises guide at http://www.hdcabling.co.za/hdcp_hdmi_handshake_troubleshooting_guidelines.php

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

No HDMI / CAT5e / CAT6 cables are included with this product and must be purchased separately.

Related Keywords : hdmi extension, hdmi extension cable, hdmi cat5 extender, hdmi over network cable, hdmi extend, HDMI Balun
Price: R679.00 Manufacturer: HDCabling
Model Number: mini_HDMI_Balun_30m_1080p Added to Inventory on: Monday 14 June, 2010

HDMI over IP Networks / Ethernet Broadcaster + Receiver (Unlimited receivers possible)
Only 1 x Broadcaster unit needs to be used on any existing LAN / Ethernet Infrastructure. Unlimited receivers / displays can be connected. This set also supports IR Remote return function over IP Networks.

PRODUCT FEATURES

• Flexible and scalable HDMI 1080p broadcasting within LAN (Local Area Network)
• 1 to unlimited display broadcasting architecture, adding more displays without adding LAN bandwidth loading
• Support up to 1080p (HDTV) full HD video and audio streaming
• Ultra-High speed compression for high video quality, low latency and low bandwidth. Lower bandwidth networks will have compression to ensure smooth transmission.
• Support all displays/TV with HDMI connector input
• All available LAN technology can be used, e.g. Fast Ethernet, Gigabit Ethernet, WLAN and HomePNA
• Plug and Play, no configuration required

PRODUCT SPECIFICATION

• HDMI Spec. : 1.3 Compatible
• DVI Spec. : 1.0 Compliant
• HDCP Spec. : 1.2 Compliant
• Link Connector : RJ45
• Operation temperature : 0-40ºC
• Storage temperature : -20~50ºC
• Humidity Range : 5%~90%RH
• Power Consumption : 3.2W
• HDMI Audio Output : Stereo L/R, 16bits, 48Khz
• IR Control Pass Thru : IR Emitter/ Receiver to use infra Red Remote control of video source equipment(connected to sender) to control from Receiver side
• Video Format : *PB900 Sender: 480i/p, 576i/p, 720p, 1080i/p *PB900 Receiver: 480p, 576p, 720p, 1080p
• Refresh Rate:24Hz, 30Hz, 60Hz
• CAT5 Cable Length : 100M (if no switches between transmitter and receiver)
• Power Adapter : DC 5V/2A
• Material : Metal
• Dimension(LxWxH) : 120x126x27mm
• Product Weight : 450g/1lbs
• Package Content: 1080p HDMI Broadcaster + 1 x Receiver, 2 x 5V DC Adapters, User Manual, IR Emitter Cable, IR Receiver Cable

HDMI_over_IP_Diagram

Price: R3,499.00 Manufacturer: HDCabling
Model Number: HDMI_IP_set_PB900 Added to Inventory on: Sunday 24 July, 2011

HDMI over Single Coaxial Cable Extender / Balun - 720p / 1080p (Standard RF / RG6U cable) up to 120m without daisy chaining
This HDMI over single Coax. Extender uses single 75Ω Coax cable, such as RG-6U cable to extend the HDTV display up to 120 meters (400 feet Max) for 1080p. It not only breaks the limitation of the HDMI cable transmission length,but also has more flexibility and convenience in cable construction. RG6U cable costs are very low compared to CAT6 / CAT7 networking cables. 64 or 96 Braid Coax cables are recommended for long distance installations. When daisy chaining with additional receivers distances up to 1000m has been tested. One transmitter supports unlimited receivers.

It is equipped with HDMI (high definition multimedia interface) connector and is capable of supporting DVI (digital visual interface) equipment when used with an HDMI to DVI Adapter, providing greater flexibility and options when integrating several home theater components.

This product offers solutions for residential consumers: HDTV retail and show site, HDTV, STUB, DVD and Projector factories, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

Features

● Support Cascade function in Transmitter and Receiver and easy to build a network system by installer.
● Switch easily between two HDMI sources by Remote control. The transmitter unit has 2 x HDMI inputs and functions as a switch as well.
● One piece of 75Ω Coax cable can substitute HDMI cable to achieve long distance transmission.
● Transmission distance can be up to 120 meters (400 feet Max) for 1080p using RG-6U Cable.
● Maintains highest HDMI single link video resolution 1080P/60Hz.
● Support digital video formats in Deep Color Mode at up to 12bits/color.
● Support full HDMI audio and video.
● Easy to install and simple to use.

Specificatrions

● Video amplifier bandwidth : 340 GHz
● Max. Video output : 1080P/60Hz
● Color depth : 12 bit Max.
● Input TMDS signal : 1.2 Volts P-P
● Input DDC signal - 5 Volts P-P (TTL)
● HDMI input/output connector - HDMI type A 19Pin Link Connector / BNC Output Connectors to RG6U Cable
● Power supply : 5V DC/1A
● Dimensions( L x W x H) : 98.5 x 92.6 x 31mm

Package Contents

Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:

● Main unit (Transmitter and Receiver).
● Remote control.
● 75Ω BNC terminator.
● 5V DC/1A Power supply.
● User's Manual.

Installation Instructions

1. Connect the HDMI source device to the CB1 transmitter unit via HDMI cable.
2. Connect one 75Ω RG-6U Coax. cable between the output port of transmitter and input port of number A receiver.
3. Connect one 75ΩRG-6U Coax cables between the cascade port of transmitter and input port of number B receiver.
4. Connect the HDTV display HDMI input port to the receiver using a HDMI cable.
5. Connect the included 5V/1A DC power supplies to both the transmitter and receiver units.
6. Power on the output device first and the source second.

Notes

1. Please refer to connection diagram section.
2. If be only one-to-one connected, please don't forget to install the BNC terminator on to the output of RX unit.

HDMI_over_Coaxial_Cable_Connection_Diagram

Price: R3,899.00 Manufacturer: HDCabling
Model Number: HDMI_Over_Coax_Set Added to Inventory on: Thursday 21 July, 2011

HDMI to AV / RCA (Composite / CVBS) video converter with Downscaler
This converter will convert any HDMI video to composite (Yellow RCA) Output to be used with older displays not having an HDMI input. It has a built-in audio decoder and will decode audio from HDMI input to stereo analog RCA output to be connected to external speakers or presentation device.

Specifications

● Input: HDMI Video Type A female Connector
● Output: 1 Composite Video (RCA) 480i / 576i standard definition, 2 x RCA for Audio R/L Red/White.
● Input HDMI video resolution: 480P, 576P, 720P, 1080I, 1080P
● Output video supports both NTSC and PAL. Switch by button on the box.
● Portable size: 11(L) x 7(W) x 2.6(H) cm
● Power supply included: 5V/1A

Example Installation Diagram

HDMi to AV Converter Installation diagram

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

** NOTE!! - Composite / Yellow RCA video has a limitation of 480i / 576i resolution which is a limitation by international specification and not a limitation of the converter. The converter will supply the best resolution possible for composite vide 480i / 576i output using the built-in downscaler.
Related Keywords : HDMI to composite, HDMI to rca, HDMI to svideo, HDMI to s-video
Price: R1,099.00 Manufacturer: HDCabling
Model Number: HDMI_to_AV_Composite Added to Inventory on: Monday 10 October, 2011

HDMI to VGA Converter - (Ultimate 1080 model) - Same functions as HDFURY Blue edition
Tested 100% with all common HDMI sources such as Multichoice HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

This product is similar to the HDFURY1 Blue edition. It will convert video & audio from a HDMI source to VGA / HD15 / D-Sub (15 pins, 3 rows of 5 pins each) with separate 3.5mm Stereo audio output.

Features

● One HDMI input signal that converts to VGA+Stereo analog.
● Supported video input : HDMI 1.2a
● Supported audio output : 3.5mm R/L Analog Stereo.
● Supported output : Support up to UXGA and 720p/1080p(50/60Hz), the same format as input. No Upscaling or downscaling of resolutions. Your end display needs to supported the resolution on the VGA / PC input from the source device e.g for 720p the resolution 1280 x 720 needs to be supported on display which is a 16:9 aspect ratio.
● HDCP 1.2 protocol compliant.
● LED indication : when source or sink is working.
● Installs in minutes
● Need DC5V / 0.8A power supply. Adapter is supplied with converter.

Connection and Operation Instructions

1. Connect one cable from HDMI Source / Player into the Converter HDMI input.
2. Connect VGA+3.5mm audio from monitor or projector / external speakers into Converter output.
3. Connect 5V power supply to the converter.

Specifications

● Model : Ultimate 1080
● HDMI resolution : HDMI 1.2a
● Input Video signal : 0.5~1.5Volts p-p
● Input DDC signal : 5Volts p-p (TTL)
● VGA output : Support up to UXGA and 720p/1080i(60Hz)
● Audio output : R/L Analog 3.5mm jack plug
● Max transmission bandwidth : 5.1Gbps
● Max working current : 600mA
● Power adapter format - Input : AC (50HZ, 60HZ) 100V-240V; Output : DC5V / 0.8A
● Operating Temperature range : (-15 to +55℃)
● Operating Humidity range : 5 to 90%RH (No Condensation)
● Dimensions : (L x W x H) - 174 x 70 x 20 (mm)
● Weight : 450g

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Related Keywords : HDMI to VGA, HDMI to D-sub, HDMI to RGB, RGB from HDMI Converter, HDMI to YPbPr Converter, HDMI to 3-RCA Converter, HDMI to Component video converter, HDFURY 2 video Converter, Component from HDMI Converter
Price: R879.00 Manufacturer: HDCabling
Model Number: HDMI_Ultimate_HDMI_to_VGA_ Added to Inventory on: Friday 08 October, 2010

mini-HDFURY Pro - HDMI to Component / YPbPr or VGA Converter - Same functions as HDFURY2
Tested 100% with all common HDMI sources such as Multichoice HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

This product is similar to the HDFURY2. It will convert video & audio from a HDMI source to Component (3-RCA / YPbPr) or VGA / HD15 / D-Sub (15 pins, 3 rows of 5 pins each) with separate Toslink Digital Audio output.

Features

● HDMI input that converts to one YPbPr+SPDIF or VGA+SPDIF.
● Can be connected to any non-HDCP certified HDTV and still provide an HD quality picture.
● Supported video input : HDMI 1080p, 720p, 1080i, 576p or 480i/p
● Supported audio output : SPDIF (Optical Toslink)
● Supported output :
- YPbpr : 480i/50HZ, 480i/60HZ, 720i/50HZ, 720i/60HZ, 1080i/50HZ, 1080i/60HZ
- VGA: 480P/50HZ, 480P/60HZ, 720P/50HZ, 720P/60HZ, 1080P/50HZ, 1080P/60HZ
● Supports the same format as input. No Upscaling or downscaling of resolutions. Your end display needs to supported the resolution on the Component or VGA input from the source device e.g for 720p the resolution 1280 x 720 needs to be supported on display which is a 16:9 aspect ratio, for 1080p input, 1920 x 1080 needs to be supported on the display device YPbPr or VGA input.
● HDCP 1.2 protocol compliant.
● Installs in seconds
● Supplied with VGA to Component cable for HDMI to YPbPr (Red/Green/Blue for Video) installtions.
● No external power required (> 5m HDMI Cable installations may require additional external power supply).

Connection and Operation Instructions

1. Connect one cable from HDMI Source / Player into the Converter HDMI input.
2. Connect VGA+SPDIF or YPbPr+SPDIF from monitor or projector into Converter outputs. Only one output at a time can be used.

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Related Keywords : HDMI to VGA, HDMI to D-sub, HDMI to RGB, RGB from HDMI Converter, HDMI to YPbPr Converter, HDMI to 3-RCA Converter, HDMI to Component video converter, HDFURY 2 video Converter, Component from HDMI Converter
Price: R1,199.00 Manufacturer: HDCabling
Model Number: HDFURY_PRO_CONVERTER Added to Inventory on: Monday 18 June, 2012

PC to Remote Display via Ethernet / existing LAN Network - HDMI / VGA Net Sharestation, HDMI Video over IP, USB Network Storage Sharing Device
Features

- Supported protocols:TCP/IP,LPR,DHCP,UPnP
- Required Router or Switch (existing LAN) to assign IP address to device.
- The Device can be connected to either a remote HDMI or VGA display (only one output at a time) by using your existing LAN (Wired or Wireless) to Clone your PC / Notebook display over the LAN or to extend the display for presentations. On Wireless networks, latency has to be low and >= 300N wireless recommended. For wired networks minimum is 100Mb/s Ethernet.
- The Supplied software must be installed on a PC / Notebook with Windows OS and specific functions can be used i.e remote display, USB Storage device etc from the PC's over LAN.
- The device has 2 USB ports and any flash drive, Printer or other USB device can be shared to PC's over the Network with the supplied software installed.
- Standards:802.3 10Base-T;802.3U 100Base-T
- Network Interface:10/100/1000Mbps RJ45
- Support up to 6 display screens as digital signage function and - resolution up to 1920 x 1080 (1080p)
- Allows multiple users to share a Multi-Function Print (MFP) over a network to print,scan,and fax from any networked computer;
- Support 500mA electric current for every USB port to mount external drives or flash drives on the network to share;
- Support Windows 7,Vista and XP

HTML Online Editor Sample

Price: R1,499.00 Manufacturer: HDCabling
Model Number: PC_to_HDMI_or_VGA_Extender Added to Inventory on: Sunday 25 November, 2012

Powered HDMI Splitter 1x16 (16 outputs)- HDCP 1.2, HDMI v1.3
Tested 100% with all common HDMI sources such as HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

HDMI devices (any source / player, LCD, Plasma etc) have different results when inserting HDMI Repeater devices depending on the equipment you are using (a repeater device is any switch / splitter / extender etc). Please ensure to get confirmation from the manufacturer of your source / player / LCD that the specific player or LCD can communicate via a HDMI Repeater. Some source devices might not allow any HDMI device between itself and the LCD and will only function via a direct HDMI cable to the LCD. The opposite is also possible where the LCD needs a direct connection to the source / player and will not accept a regenerated signal from a HDMI Repeater device. Your display or source manufacturer can confirm if their product supports the functions required.

This splitter is an one input, sixteen outputs HDMI splitter. It distributes the single HDMI input into sixteen identical outputs. These sixteen outputs are synchronized.

Specifications :

● Model HDSP0116
● Splits the HDMI signal to 16 x HDMI display devices simultaneously
● Each port supports HDMI or DVI inputs
● 8dB receiver equalization to compensate for longer length HDMI cable signal losses
● 3dB driver pre-emphasis to compensate to PCB losses.
● HDMI v1.3a and HDCP 1.2 protocol compliant.
● Support deep color 36bit and signal retiming.
● Support digital audio split in HDMI, such as LPCM / Dolby-AC3 / DTS 7.1 / DSD / Dolby TrueHD / Dolby Master Audio.
● Full-HD 1080p cascaded above 3 layers --> These splitters can be stacked in 3-layers on a 16 x 16 x 16 config to distribute the signal from a single source to 4096 displays.
● LED Indication: When source device and the sink display devices work in HDCP status, the color of the LED relative to the sink will be blue. When source is Non-HDCP, the color of the LED relative to the sink will be red.
● Dimension(L x W x H) : 380mm x 140mm x 60mm
● Data transfer speed : 2.25Gbps x 3
● DC5V power supply, max working current 2.4A

Series connection of these splitters achieves long distance transmission of HDMI signals of more than 15 meters using HDMI 26 / 24 AWG cable specifications.

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON. The sequence below should be followed when installing new cables or equipment between source/player and LCD / Plasma.

1.) Power-off all equipment (At the wall socket).
2.) Connect all Cables, Splitters, Switches, Extenders within HDMI Distribution Network.
3.) Power on all Splitters, Switches, Extenders within HDMI Distribution Network.
4.) Power on all LCD / Plasma's and set to HDMI input from HDMI Distribution Network.
5.) Power on Sources / Players (Sources negotiates HDCP Handshake via HDMI Network to displays which is set to HDMI input to respond to handshake).

Most HDMI Sources / Players / Gaming Consoles use an encryption algorithm called HDCP which can cause signal issues. To troubleshoot audio / video issues (HDMI Handshake problems) regarding HDMI distribution see the problems and solutions guide at http://www.hdcabling.co.za/hdcp_hdmi_handshake_troubleshooting_guidelines.php

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. This item conforms to the HDMI v1.3 specifications described in the section. In general for Blu-ray HDMI v1.0 is required as a minimum and for PS3 / Xbox 360 HDMI v1.2 is recommended as a minimum. HDMI v1.3 exceeds both HDMI v1.0 and v1.2 specifications.

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this product and for alternative wiring options.

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Related Keywords : hdmi 1x16 splitter, hdmi cable splitter, split hdmi 1x16, hdmi converter 1x16, 1x16 hdmi splitter, hdmi connection splitter, hdmi powered splitter, hd distribution, audio distribution, digital distribution, 16-way hdmi splitter, 16 times hdmi splitter, 16 way hdmi split, 16 way hdmi splitter
Price: R3,699.00  R2,699.00 Manufacturer: HDCabling
Model Number: 1x16_Splitter_HDMI_Powered Added to Inventory on: Wednesday 12 August, 2009

Powered HDMI Splitter 1x2 (2 outputs) with 3D Support - HDCP v1.2
Tested 100% with all common HDMI sources such as HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

HDMI devices (any source / player, LCD, Plasma etc) have different results when inserting HDMI Repeater devices depending on the equipment you are using (a repeater device is any switch / splitter / extender etc). Please ensure to get confirmation from the manufacturer of your source / player / LCD that the specific player or LCD can communicate via a HDMI Repeater. Some source devices might not allow any HDMI device between itself and the LCD and will only function via a direct HDMI cable to the LCD. The opposite is also possible where the LCD needs a direct connection to the source / player and will not accept a regenerated signal from a HDMI Repeater device. Your display or source manufacturer can confirm if their product supports the functions required.

This splitter is a two outputs HDMI splitter. It distributes the single HDMI input into two identical outputs. These two outputs are synchronized.

Series connection of these splitters achieves long distance transmission of HDMI signals of more than 15 meters using HDMI 26 / 24 AWG cable specifications.

Specifications :

● Model HDSP0102M
● Splits the HDMI signal to 2 HDMI display devices simultaneously.
● Each port supports HDMI or DVI inputs
● 8dB receiver equalization to compensate for long distance HDMI cable signal losses.
● 3dB driver pre-emphasis to compensate to PCB losses.
● HDMI v1.3a and HDCP 1.2 protocol compliant.
● Support deep color 36bit and signal retiming.
● Support digital audio split in HDMI, such as LPCM / Dolby-AC3 / DTS 7.1 /DSD / Dolby TrueHD / Dolby Master Audio.
● Full-HD 1080p cascaded above 10 layers
● LED Indication: When source device and the sink display devices work in HDCP status, the color of the LED relative to the sink will be blue. When source is Non-HDCP, the color of the LED relative to the sink will be red.
● Dimension(LXWXH) : 89mm x 45.5mm x 26mm
● Data transfer speed : 2.25Gbps x 3
● DC5V power supply

When two or more splitters are cascaded, they can be used to create a larger HDMI / HDTV distribution.

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. This item conforms to the HDMI v1.3 specifications described in the section. In general for Blu-ray HDMI v1.0 is required as a minimum and for PS3 / Xbox 360 HDMI v1.2 is recommended as a minimum. HDMI v1.3 exceeds both HDMI v1.0 and v1.2 specifications.

This item is supplied without packaging / boxing directly from the factory to reduce costs to the public. You will not find another quality HDMI product such as this at a better price.

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON. The sequence below should be followed when installing new cables or equipment between source/player and LCD / Plasma.

1.) Power-off all equipment (At the wall socket).
2.) Connect all Cables, Splitters, Switches, Extenders within HDMI Distribution Network.
3.) Power on all Splitters, Switches, Extenders within HDMI Distribution Network.
4.) Power on all LCD / Plasma's and set to HDMI input from HDMI Distribution Network.
5.) Power on Sources / Players (Sources negotiates HDCP Handshake via HDMI Network to displays which is set to HDMI input to respond to handshake).

Most HDMI Sources / Players / Gaming Consoles use an encryption algorithm called HDCP which can cause signal issues. To troubleshoot audio / video issues (HDMI Handshake problems) regarding HDMI distribution see the problems and solutions guide at http://www.hdcabling.co.za/hdcp_hdmi_handshake_troubleshooting_guidelines.php

1 X 2 HDMI Splitter Wiring Diagram

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this product and for alternative wiring options.

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Related Keywords : hdmi 1 x 2 splitter, hdmi cable splitter, split hdmi 1x2, hdmi converter 1 x 2, 1x2 hdmi splitter, hdmi connection splitter, hdmi powered splitter, hd distribution, audio distribution, digital distribution, 2-way hdmi splitter, 2 times hdmi splitter, 2 way hdmi split, 2 way hdmi splitter
Price: R499.00 Manufacturer: HDCabling
Model Number: 1x2_Splitter_HDMI_Powered Added to Inventory on: Wednesday 03 September, 2008

Powered HDMI Splitter 1x4 (4 outputs) with 3D Support - HDCP v1.2
Tested 100% with all common HDMI sources such as HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

HDMI devices (any source / player, LCD, Plasma etc) have different results when inserting HDMI Repeater devices depending on the equipment you are using (a repeater device is any switch / splitter / extender etc). Please ensure to get confirmation from the manufacturer of your source / player / LCD that the specific player or LCD can communicate via a HDMI Repeater. Some source devices might not allow any HDMI device between itself and the LCD and will only function via a direct HDMI cable to the LCD. The opposite is also possible where the LCD needs a direct connection to the source / player and will not accept a regenerated signal from a HDMI Repeater device. Your display or source manufacturer can confirm if their product supports the functions required.

This splitter is a four outputs HDMI splitter. It distributes the single HDMI input into four identical outputs. These four outputs are synchronized.

Specifications :

● Model HDSP0104M
● Splits the HDMI signal to 4 HDMI display devices simultaneously
● Each port supports HDMI or DVI inputs
● 8dB receiver equalization to compensate for long distance HDMI cable signal losses.
● 3dB driver pre-emphasis to compensate to PCB losses.
● HDMI v1.3a and HDCP 1.2 protocol compliant.
● Support deep color 36bit and signal retiming.
● Support digital audio split in HDMI, such as LPCM / Dolby-AC3 / DTS 7.1 /DSD / Dolby TrueHD / Dolby Master Audio.
● Full-HD 1080p cascaded above 10 layers
● LED Indication: When source device and the sink display devices work in HDCP status, the color of the LED relative to the sink will be blue. When source is Non-HDCP, the color of the LED relative to the sink will be red.
● Dimension(LXWXH) : 114.5mm x 62.5mm x 26mm
● Data transfer speed : 2.25Gbps x 3
● DC 5V power supply - Included with purchase

When two or more splitters are cascaded, they can be used to create a larger HDMI / HDTV distribution. Series connection of these splitters achieves long distance transmission of HDMI signals of more than 15 meters using HDMI 26 / 24 AWG cable specifications.

This item is supplied without packaging / boxing directly from the factory to reduce costs to the public. You will not find another quality HDMI product such as this at a better price.

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON. The sequence below should be followed when installing new cables or equipment between source/player and LCD / Plasma.

1.) Power-off all equipment (At the wall socket).
2.) Connect all Cables, Splitters, Switches, Extenders within HDMI Distribution Network.
3.) Power on all Splitters, Switches, Extenders within HDMI Distribution Network.
4.) Power on all LCD / Plasma's and set to HDMI input from HDMI Distribution Network.
5.) Power on Sources / Players (Sources negotiates HDCP Handshake via HDMI Network to displays which is set to HDMI input to respond to handshake).

Most HDMI Sources / Players / Gaming Consoles use an encryption algorithm called HDCP which can cause signal issues. To troubleshoot audio / video issues (HDMI Handshake problems) regarding HDMI distribution see the problems and solutions guide at http://www.hdcabling.co.za/hdcp_hdmi_handshake_troubleshooting_guidelines.php

1 X 4 HDMI Splitter Wiring Diagram

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this product and for alternative wiring options.

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. This item conforms to the HDMI v1.3 specifications described in the section. In general for Blu-ray HDMI v1.0 is required as a minimum and for PS3 / Xbox 360 HDMI v1.2 is recommended as a minimum. HDMI v1.3 exceeds both HDMI v1.0 and v1.2 specifications.

1 x 4 HDMI Splitters Cascaded Diagram

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Related Keywords : hdmi 1x4 splitter, hdmi cable splitter, split hdmi 1x4, hdmi converter 1x4, 1x4 hdmi splitter, hdmi connection splitter, hdmi powered splitter, hd distribution, audio distribution, digital distribution, 4-way hdmi splitter, 4 times hdmi splitter, 4 way hdmi split, 4 way hdmi splitter
Price: R979.00 Manufacturer: HDCabling
Model Number: 3D_1x4_HDMI_Splitter Added to Inventory on: Monday 10 October, 2011

Powered HDMI Splitter 1x8 (8 outputs) with 3D Support - HDCP 1.2, HDMI v1.4
Tested 100% with all common HDMI sources such as HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

HDMI devices (any source / player, LCD, Plasma etc) have different results when inserting HDMI Repeater devices depending on the equipment you are using (a repeater device is any switch / splitter / extender etc). Please ensure to get confirmation from the manufacturer of your source / player / LCD that the specific player or LCD can communicate via a HDMI Repeater. Some source devices might not allow any HDMI device between itself and the LCD and will only function via a direct HDMI cable to the LCD. The opposite is also possible where the LCD needs a direct connection to the source / player and will not accept a regenerated signal from a HDMI Repeater device. Your display or source manufacturer can confirm if their product supports the functions required.

This splitter is an one input, eight outputs HDMI splitter. It distributes the single HDMI input into eight identical outputs. These eight outputs are synchronized.

Specifications :

● Model HDSP0108
● Splits the HDMI signal to 8 x HDMI display devices simultaneously
● Supports 3D content from Playstation 3, 3D Blu-ray etc.
● Each port supports HDMI or DVI inputs
● 8dB receiver equalization to compensate for longer length HDMI cable signal losses
● 3dB driver pre-emphasis to compensate to PCB losses.
● HDMI v1.3a and HDCP 1.2 protocol compliant.
● Support deep color 36bit and signal retiming.
● Support digital audio split in HDMI, such as LPCM / Dolby-AC3 / DTS 7.1 / DSD / Dolby TrueHD / Dolby Master Audio.
● Full-HD 1080p cascaded above 3 layers --> Stack these 1 x 8 splitters to distribute to 8 x 8 x 8 (3-layers) displays e.g. distribute the audio and video from a single HDPVR / PS3 or other HDMI device to 512 LCD's / Plasma's or Projectors!
● LED Indication: When source device and the sink display devices work in HDCP status, the color of the LED relative to the sink will be blue. When source is Non-HDCP, the color of the LED relative to the sink will be red.
● Dimension(L x W x H) : 320mm x 100mm x 36mm
● Data transfer speed : 2.25Gbps x 3
● DC5V power supply

Series connection of these splitters achieves long distance transmission of HDMI signals of more than 15 meters using HDMI 26 / 24 AWG cable specifications.

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON. The sequence below should be followed when installing new cables or equipment between source/player and LCD / Plasma.

1.) Power-off all equipment (At the wall socket).
2.) Connect all Cables, Splitters, Switches, Extenders within HDMI Distribution Network.
3.) Power on all Splitters, Switches, Extenders within HDMI Distribution Network.
4.) Power on all LCD / Plasma's and set to HDMI input from HDMI Distribution Network.
5.) Power on Sources / Players (Sources negotiates HDCP Handshake via HDMI Network to displays which is set to HDMI input to respond to handshake).

Most HDMI Sources / Players / Gaming Consoles use an encryption algorithm called HDCP which can cause signal issues. To troubleshoot audio / video issues (HDMI Handshake problems) regarding HDMI distribution see the problems and solutions guide at http://www.hdcabling.co.za/hdcp_hdmi_handshake_troubleshooting_guidelines.php

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. This item conforms to the HDMI v1.3 specifications described in the section. In general for Blu-ray HDMI v1.0 is required as a minimum and for PS3 / Xbox 360 HDMI v1.2 is recommended as a minimum. HDMI v1.3 exceeds both HDMI v1.0 and v1.2 specifications.

1 X 8 HDMI Splitter Wiring Diagram

Please check the Home Entertainment Wiring Diagram section on our website for common uses of this product and for alternative wiring options.

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Related Keywords : hdmi 1x8 splitter, hdmi cable splitter, split hdmi 1x8, hdmi converter 1x8, 1x8 hdmi splitter, hdmi connection splitter, hdmi powered splitter, hd distribution, audio distribution, digital distribution, 8-way hdmi splitter, 8 times hdmi splitter, 8 way hdmi split, 8 way hdmi splitter
Price: R1,899.00 Manufacturer: HDCabling
Model Number: 3D_1x8_HDMI_Splitter Added to Inventory on: Tuesday 11 October, 2011

Realtime 2D to 3D Converter including pair of 3D glasses & IR Remote Control - Turn your 2D HDTV into a 3D HDTV
This converter has a HDMI input and HDMI output and performs the conversions below in realtime.

● Turn Your 2D Movies Collection to 3D in Real Time
● Convert Real Time TV Programs to 3D
● Real 3D Movies to play on 2D HDTV with 3D effects
● Works with 2D HDTV, 3D HDTV, 3D DLP Projector.

Ratings from tests performed based on watching 3D content on 3D HDTV = 10/10 with HDTV 3D Shutter Glasses

1.) 3D Content / Movie (side by side rendering from Blu-ray, .mkv, .avi etc) to 2D HDTV - Rating 8 out of 10. Very close to 3D source with 3D HDTV 3D Effects. Effects are towards and outwards from the HDTV.
2.) 2D content e.g HDPVR HD Sports Channel, 2D Blu-ray Disc to 3D HDTV / DLP Projector using the 3D Active Shutter Glasses (TV / projector decoding 3D picture from converter) - Rating 8 out of 10. 3D effect is mostly towards the screen but deeper 3D effects noticed.
3.) 2D content e.g HDPVR HD Sports Channel, 2D DVD / Blu-ray to 2D HDTV - Rating 4 out of 10. 3D rendering effect by converter is mostly towards the screen / see 3D into the screen. The converter main function and best 3D effects are 2D content to 3D HDTV and 3D Content to 2D HDTV.

Introduction

Due to lack of available 3D contents, 3D ready TV or display devices will not be viewed in 3D mode all the time. This converter will offer real-time 2D to 3D conversion for all 2D content to combat the shortage of 3D contents.

It provides 2D to 3D converting functions, allowing you to watch your 2D content in 3D effect! It is also designed to work with 2D HDTV's, 3D HDTV's and 3D DLP Projectors. It provides impressive 3D effects on all display types supported. On 2D HDTV's, you can enjoy 3D effects by red/cyan or amber/cyan glasses, no matter which source contents are 2D or 3D. You can convert 2D videos into 3D effect in real time on 3D HDTV simply by using this converter.

3D ready DLP Projector is becoming popular for Home A/V Entertainment. However, most people can not enjoy 3D programs on 3D ready DLP Projector easily, due to 3D format supporting problems on 3D DLP projectors. With this converter, users can easily watch their 3D content on 3D ready DLP Projectors.

Features

- 2D to 3D real-time conversion
- Support 2D HDTV, 3D HDTV, and 3D DLP Projectors
- Support 3D Ready DLP Projector
- 3D format Outputs: Red/Cyan (Amber/Cyan), Side-By-Side (Half), Frame Sequential, 2D and 3D bypass. NOTE!! Some Blu-ray players uses sequential 3D if Blu-ray disc played. The device playing and content must be in the supported formats e.g. Side-by-Side AVI from Flash drive or Blu-ray disc rendered by player to correct format e.g to Side-by-Side 3D.
- Input: HDMI v1.3/v1.4, Output: HDMI v1.3, HDCP compliant
- Plug-and-Play Installation
- IR remote control
- 3D effect level adjustment

Contents of Package

- 2D to 3D Converter main unit *1
- Red/Cyan or Amber/Cyan glasses *2
- DC 5V/1A power adaptor *1
- User’s Manual *1
- IR Remote controller *1
- HDMI Cables NOT included

2D to 3D Realtime Converter Installation Example
Cautions when watching 3D contents

1. It may cause drowsiness, headache, or giddiness when watching 3D program for a long time. Take 10~15 minutes break every hour. Stop watching 3D videos immediately when you have any uncomfortable feeling.
2. Pregnant women, seniors, people with heart problems should avoid watching 3D programs.
3. Watching 3D program may affect children’s visual development, especially for children under 5 years old.
4. It may harm your vision when watching 3D program too close or for a long time.
5. Remind children to take rest when watching 3D programs for a while if necessary.
6. Do not use Red/Cyan or Amber/Cyan glasses when driving. Please use Red/Cyan or Amber/Cyan glasses when watching 3D programs only.

Unit Front View

2D_to_3D_Converter_Front_View
Operation

Mode 1: 2D Program to 2D HDTV - When you want to convert 2D program into 3D effect and watch via 2D HDTV

- Use Red/Cyan or Amber/Cyan glasses to watch.
- Level of 3D effect can be adjusted.
- 3D format output: 3D Red/Cyan or Amber/Cyan.

Mode 2: 2D Program to 3D HDTV - When you want to convert 2D program into 3D effect and watch via 3DTV

- Use Shutter (or Polarized) glasses designed for 3D HDTV
- Level of 3D effect can be adjusted.
- 3D format output: 3D Side-by-Side (Half)

(1) Users need to wear an active Shutter (or a passive Polarized) glasses to watch 3D effect videos on 3D HDTV's.
(2) If the 3D HDTV requires an active shutter glasses for 3D viewing, please make sure the active shutter glasses can match with the 3D TV.
(3) If the 3D HDTV is a passive polarized 3D TV, please make sure the passive polarized glasses can match with the 3D TV.
(4) After converting, if you see two images (side-by-side) on TV, you will need to use TV remote control to select input 3D format (please refer to TV’s manual), to make two images into one 3D image.

Mode 3: 2D Program to 3D DLP Projector - When you want to convert 2D program into 3D effect and watch via 3D DLP Projector.

- Use Shutter glasses designed for 3D DLP Projector
- Level of 3D effect can be adjusted.
- 3D format output: 3D Frame Sequential (for 3D DLP Projector)

Mode 4: 3D Program to 2D HDTV - When you want to watch 3D program (e.g 3D Blu-ray disc) on 2D HDTV with 3D Effects.

- Use Red/Cyan or Amber/Cyan glasses to watch.
- 3D format input: Side-by-Side (Half) supported.
- 3D format output: 3D Red/Cyan or Amber/Cyan.

(1) When converting 3D programs, please make sure the original 3D program is side-by-side (Half) format.
(2) Other 3D format (Frame Packing, Top-and-bottom) will be supported in next generation box.
(3) Source Device (Player, STB, Receiver … etc.) need be setted 16:9.

Mode 5: 3D Program to 3D DLP Projector - When you want to watch 3D program on 3D DLP Projector (Note: Please make sure 3D function of 3D DLP Projector is ON.)

- Use Shutter glasses designed for 3D DLP Projector
- 3D format Input: Side-by-Side (Half) and Frame Packing 720p (50/60fps) supported.
- 3D format output: 3D Frame Sequential (for 3D DLP Projector)

(1) Users need to wear Shutter glasses to watch 3D effect videos via 3D Ready DLP Projector.
(2) When converting 3D programs, please make sure the original 3D program is side-by-side (Half) format.
(3) 3D Frame Packing 720p (50/60fps) can only be converted to 3D Frame Sequential (for 3D DLP Projector).
(4) Other 3D format (Frame Packing, Top-and-bottom) will be supported in next generation box.
(5) If using 3D DLP Projector and you feel the 3D effect is not good enough, the 3D glasses and the 3D DLP Projector may not synchronize the left and right image to eyes correctly. (Left eye should see the left image; right eye should see the right image.) Please reset the power of the projector or 3D glasses or reconnect the HDMI cable to synchronize the signal.
(6) Some 3D DLP projectors can not support 1080p 3D video. The image will break off shortly sometimes. Please set the output resolution of source device (Player, STB, Receiver … etc.) to 720P or 1080i.

Mode 6: Pass - Input = Output, 2D/3D program will be passed through.

Price: R1,599.00  R989.00 Manufacturer: HDCabling
Model Number: 2D_to_3D_Converter Added to Inventory on: Monday 10 October, 2011

Receiver Unit - HDMI Extender over LAN / IP Network Switches (Ethernet / HDBaseT) - Unlimited Receivers possible
These HDMI over LAN / IP Baluns can use your existing network infrastructure in a building whether it is wired networking or wireless. > 100Mb/s networks is needed for wired distribution and wireless 300N networks with low latency is recommended when using wireless networking to distribute your HDMI signal.

You only need one transmitter per source / player and can connect an unlimited amount of receivers to your network switches and the transmitter will broadcast signal to all connected receivers. If the switches are managed it is recommended to setup different VLAN's to separate HDMI over IP traffic from other IP traffic on the network.

The transmission distances via network switches is theoretically unlimited since each network switch or access point / router will reroute traffic to the next switch and signal will not be affected on longer distances or more network hops.

The Transmitter and Receiver HDMI over Network / IP unit can be directly connected to each other via a single CAT6e Cable without switches or networking equipment to send a signal up to 100m between source / player and display. Tested 100% with all common HDMI sources such as HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

HDMI over LAN / IP Network Switches

When connecting the transmitter and receiver use the CAT5e Shielded Twisted Pair Cables at CAT5e Shielded Twisted Pair (STP) 350Mhz ISA/IEC 11801 Cable or CAT6 STP Cables at CAT6e STP Full Copper Solid Core Ethernet Cable. CAT5e FTP / STP depending on quality of cable (Full Copper cables) can be installed for resolutions up to 1080p depending on color depth, refresh rates & equipment signal quality, but only recommended up to 720p/1080i. For 1080p transmissions full copper CAT6e FTP / STP or CAT7 SSTP are required when connecting the transmitter and receiver directly to each other without networking switches.

Please ensure cables are terminated according to 568A or 568B standard as in diagram below depending on CAT5e / CAT6 STP cable type and properly grounded via the ripcord wire inside STP cables. Grounding the cable will also ensure better protection against voltage spikes. STP cables shields better against nearby EMI.

STP or UTP 568B Termination/Crimping Standard

Price: R909.00 Manufacturer: HDCabling
Model Number: HDMI_LAN_RX Added to Inventory on: Wednesday 05 September, 2012

SCART to HDMI / AV to HDMI or S-video to HDMI Upscaler - Upscale / Upconvert to 720p/1080p
This converter takes either Composite (Yellow RCA) Video, SCART / RGB video using a direct SCART to SCART cable from source or S-Video as input and converts it to HDMI. It will combine the audio input (3.5mm stereo jack input) into the HDMI stream to have audio & video via HDMI. It allows older analog devices to be integrated into today's home theatre systems.

Upscalers only change the resolution of the input signal to a higher resolution, digital format and will have no difference in video on the output. This device also functions as an Upconverter (different from upscaler only) and will apply post-processing image algorithms to make the image look smoother and less pixelated by using pixel interpolation, pixel blending, bicubic filtering, de-interlacing & color enhancements. This converter has a built-in processor to do image enhancements. Please note that NO PRODUCT on the market can upscale low quality composite (RCA) video to be the same quality as HD 720p video or 1080p video, but some video improvements can be noticed when using this converter.

This converter is primarily used to connect traditional Composite / Yellow RCA / SCART devices to a LCD (such as a PC LCD) which does not have Composite / RCA inputs and only HDMI inputs. It is also used to convert the signal to HDMI to allow distribution to other areas of your home or company via HDMI extenders & splitters to display the content on multiple displays.

Features

● Upscale Composite, SCART or S-video to HDMI 720p/1080i/p.
● HDMI Output:720P, 1080P/60HZ, Supports DVI output :1024X760, 1360X768, 1680X1050
● HDMI Aspect Ratio :4:3, 16:9, 16:10, 2.35:1
● OSD Menu Display,Remote Control adjusts RGB parameters.
● SCART video with separate audio combined on HDMI output. Audio also available on separate output via L/R 3.5mm jack output.
● Video Input :Automatic identify RGB(50/60HZ, CVBS (Composite / Yellow RCA)
● Size : 175mm*110mm*34mm
● Input audio is integrated into HDMI out as well as pass-through to headphone (3.5mm socket) or amplifier / separate speakers.
● Input video systems - NTSC and PAL is automatically detected and adjusted.

Operation Controls and Functions

● AUDIO OUT : To connect to any stereo speakers, headphone or amplifier - 3.5mm socket.
● HDMI OUT: To connect to HD display. HD Display needs to support 720p on HDMI port.

Specifications

- Model RGB/CVBS/Svideo to HDMI Ultimate 1080
- Inputs : One Composite Video (Yellow RCA), One AUDIO L/R, One S-video input or when remocing SCART adapter 1 female SCART adapter / cable input
- Outputs : One HDMI, One Audio (3.5mm socket)
- Power : DC 5V/2A
- Dimensions : 74(W) × 114(L) × 13(H) mm
- Net Weight: 0.55kg

Price: R799.00 Manufacturer: HDCabling
Model Number: SCART_to_HDMI_AV_to_HDMI Added to Inventory on: Monday 10 October, 2011

Single CAT6e Cable HDMI Balun / Extender over UTP / STP (50 Meter 1080p/100 Meter 720p-1080i) - HDCP 1.2, HDMI v1.3
Tested 100% with all common HDMI sources such as HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

HDMI carries 2 channels : TMDS (Video/Audio & sync information) and DDC (5 volt, HDCP information) which are combined on the single port HDMI Extender. More info at HDMI Signal Explained. Due to 100% stability needed on the TMDS channel for sync information CAT5e or CAT6 Shielded Twisted Pair (STP) is required to ensure no sync losses occur. Basically you have one cable on two port HDMI extenders that is highly critical for video integrity and timing where the opposite cable is not as frequency-dependent, handling only the EDID, HDCP, power, hot plug and ground, but on single HDMI extenders only one port is used, hence STP / FTP cables are mandatory.

CAT5e Shielded Twisted Pair Cables at CAT5e Shielded Twisted Pair (STP) 350Mhz ISA/IEC 11801 Cable, CAT7 SSTP Cables at CAT7 SSTP Full Copper Ethernet Cable up to 10Gb/s. CAT5e FTP / STP depending on quality of cable (Full Copper cables) can be installed for resolutions up to 1080p depending on color depth, refresh rates & equipment signal quality, but only recommended up to 720p/1080i. For 1080p transmissions full copper CAT6e FTP / STP or CAT7 SSTP are required.

Please ensure cables are terminated according to 568A or 568B standard as in diagram below depending on CAT5e / CAT6 STP cable type and properly grounded via the ripcord wire inside STP cables onto the shielded RJ45 connector. Grounding the cable will also ensure better protection against voltage spikes. STP cables shields better against nearby EMI.

STP or UTP 568B Termination/Crimping Standard

HDMI devices (any source / player, LCD, Plasma etc) have different results when inserting HDMI Repeater devices depending on the equipment you are using (a repeater device is any switch / splitter / extender etc). Please ensure to get confirmation from the manufacturer of your source / player / LCD that the specific player or LCD can communicate via a HDMI Repeater. Some source devices might not allow any HDMI device between itself and the LCD and will only function via a direct HDMI cable to the LCD. The opposite is also possible where the LCD needs a direct connection to the source / player and will not accept a regenerated signal from a HDMI Repeater device. Your display or source manufacturer can confirm if their product supports the functions required.

Benefits from using this HDMI Extender / Balun :

1. Only single CAT5e / CAT6e STP or FTP cable required
2. CAT5e / CAT6 cabling can fit into smaller areas than HDMI because of the head size of the HDMI cable (From 16 to 19mm) compared to 4-5mm for CAT5e / CAT6 STP Cables.

Features :

● One Sender & One Receiver unit.
● Use CAT-5e / CAT-6 STP / FTP cable to substitute HDMI cable to achieve long distance transmissions.
● Auto-adjustment of feedback, equalization and amplify, the user does not need to care about the length of the cable.
● Compact size.
● Signaling rates up to 2.25Gbits in support of 1080P display.
● HDCP 1.2 compliant.

Specifications :

● Model HDMI CATONE

Signal Inputs/Output

● Input Video Signal : 0.5 -1.0 volts p-p
● Input DDC Signal : 5 volts p-p (TTL)
● Maximum Single Link Range : 1920X1200, 1080P
● Output Video : HDMI 1.3
● Video format supported : DTV/HDTV, 1080P /1080i / 720P / 576P / 480P / 576i / 480i

Transmission distance

● Using STP CAT6 Cable : Up to 50M for 1080p. Transmission distance may vary on type of equipment used, quality of CAT5e / CAT6 cables used, quality of RJ45 shielded connectors and crimping quality of installation of RJ45 connectors.
● Using STP CAT6 Cable : Up to 80M for 720p. Transmission distance may vary on type of equipment used, quality of CAT5e / CAT6 cables used, quality of RJ45 shielded connectors and crimping quality of installation of RJ45 connectors.

Mechanical

● Power Consumption : 5Watts (max.)
● Dimensions : 45mm W x 25mm H x 81mm D ● Warranty : Limited Warranty 1 Year Parts and Labor

Environmental

● Operating Temperature : 0 to +70C;
● Operating Humidity : 10% to 85 % RH
● Storage Temperature :-10C to +80C
● Storage Humidity : 5% to 95 % RH (no condensation)

Regulatory Approvals

● Converter Unit : FCC,CE,UL
● Power Supply : UL,CE,FCC
Accessories Adapter
● 2 x power supplies 5v,2a : One for transmitter and one for receiver unit.
● User Manual included

Connection and operating instructions :

1. Ensure all Home Entertainment Equipment has been powered off (Including source / player and display device)
2. Connect the HDMI input sources such as:Multichoice HDPVR, Playstation 3, Xbox 360, HD-DVD, STB etc. into the Sender unit via an HDMI to HDMI cable.

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

No HDMI / CAT5e / CAT6 cables are included with this product and must be purchased separately.
Price: R999.00 Manufacturer: HDCabling
Model Number: HDMI_CATONE Added to Inventory on: Tuesday 05 July, 2011

Standard Displayport Coupler - Socket Female to Female to extend DP cables
Use a Displayport coupler to extend Displayport cables.

Description

• Extends a connection between a DisplayPort source and DisplayPort display.
• Delivers a high-quality digital video signal – ideal for connecting together DisplayPort cables.
• Supports Deep Color, high-bandwidth 10.8 Gbps applications and resolutions up to 1920 x 1200.
• Color : Black
• Specifications : DisplayPort 20-pin female to female socket / coupler
• Supports 8-bit and 10-bit Deep Color
• 10.8 Gbps bandwidth (1080p)
• Auxiliary channel support, 1 Mbps
• Gold-plated
• 4 x 3.4 x 1.7 cm
• Weight : 17 g

Price: R95.00 Manufacturer: HDCabling
Model Number: DP_Coupler Added to Inventory on: Thursday 05 May, 2011

Transmitter Unit - HDMI Extender over LAN / IP Network Switches (Ethernet / HDBaseT)
These HDMI over LAN / IP Baluns can use your existing network infrastructure in a building whether it is wired networking or wireless. > 100Mb/s networks is needed for wired distribution and wireless 300N networks with low latency is recommended when using wireless networking to distribute your HDMI signal.

You only need one transmitter per source / player and can connect an unlimited amount of receivers to your network switches and the transmitter will broadcast signal to all connected receivers. If the switches are managed it is recommended to setup different VLAN's to separate HDMI over IP traffic from other IP traffic on the network.

The transmission distances via network switches is theoretically unlimited since each network switch or access point / router will reroute traffic to the next switch and signal will not be affected on longer distances or more network hops.

The Transmitter and Receiver HDMI over Network / IP unit can be directly connected to each other via a single CAT6e Cable without switches or networking equipment to send a signal up to 100m between source / player and display. Tested 100% with all common HDMI sources such as HDPVR, Apple TV Player, Mvix (HDMI Version), Sony Playstation 3, Microsoft Xbox 360, DVD players and Blu-ray Players on the SA market.

HDMI over LAN / IP Network Switches

When connecting the transmitter and receiver use the CAT5e Shielded Twisted Pair Cables at CAT5e Shielded Twisted Pair (STP) 350Mhz ISA/IEC 11801 Cable or CAT6 STP Cables at CAT6e STP Full Copper Solid Core Ethernet Cable. CAT5e FTP / STP depending on quality of cable (Full Copper cables) can be installed for resolutions up to 1080p depending on color depth, refresh rates & equipment signal quality, but only recommended up to 720p/1080i. For 1080p transmissions full copper CAT6e FTP / STP or CAT7 SSTP are required when connecting the transmitter and receiver directly to each other without networking switches.

Please ensure cables are terminated according to 568A or 568B standard as in diagram below depending on CAT5e / CAT6 STP cable type and properly grounded via the ripcord wire inside STP cables. Grounding the cable will also ensure better protection against voltage spikes. STP cables shields better against nearby EMI.

STP or UTP 568B Termination/Crimping Standard

Price: R909.00 Manufacturer: HDCabling
Model Number: HDMI_LAN_TX Added to Inventory on: Tuesday 04 September, 2012

VGA or Component / YPbPr & Stereo Analogue Audio to HDMI Converter with USB Media Player + Remote (Combines Video and Analog Audio into HDMI Signal)
This 2-in-1 converter can combine your analog VGA (RGBHV) video signals with analog Left/Right (Red/White RCA) Audio from your source devices (PC, MAC or any other VGA device) and output signal in HDMI format or it can combine video and audio input from a YPbPr / Component source with analog audio and convert it to HDMI. It can also play the various media below and has a remote included to function as a media player connected to your HDTV's HDMI port. Also great for connecting the VGA video output of your computer or media server and integrating it into a HDMI Home Theater System or connecting component video sources to your HDMI Network.

Specifications:

  • Input: 1x VGA, 1x 3.5mm Earphone Jack, 1x Component, 1 x USB
  • Output: 1x HDMI
  • Power Supply: DC 5V/1A
  • Dimensions(mm): 145(D)x70(W)x25(H)mm
  • Operating Temperature: 0°C~ 40°C
  • VGA input resolutions: 640x480@60/75Hz, 800x600@60/75Hz, 1024x768@60/75Hz, 1280x720@60Hz,1280x768@60Hz, 1152x864@75Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1440x900@60Hz, 1680x1050@60Hz, 1600x1200@60Hz, 1920x1080@60Hz
  • Component(Ypbpr) input resolutions: 480i, 576i, 480p, 576p, 720p50/60Hz, 1080i@50/60Hz,1080P@50/60Hz
  • USB INPUT (For Media Player function): Video Formats: MPEG, H.264, RM/RMVB. Picture Formats: JPEG, BMP, PNG. Audio Formats: MPEG1/2, MP3.
  • HDMI output resolutions: 720p60Hz, 1080p60Hz

Connection Diagram:

Panels:

This product is not supplied with any HDMI, Coaxial or Toslink cables. Cables need to be purchased separately. Product supplied without packaging / boxing directly from factory to ensure lowest price possible to the public. You will not find another similar device with the same quality for a lower price.

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Related Keywords : vga to hdmi converter, rca analog to hdmi converter, PC to HDMI converter, stereo rca to HDMI converter, convert PC graphics card to HDMI, RGB to HDMI, HD15 to HDMI
Price: R949.00 Manufacturer: HDCabling
Model Number: VGA_YPbPr_to_HDMI_Converter Added to Inventory on: Monday 25 March, 2013

VGA to HDMI Converter (Combines VGA and Stereo Audio into HDMI Signal)
This VGA + Analog audio to HDMI converter combines your analog VGA (RGBHV) video signals with analog Left/Right (Red/White RCA) Audio from your source devices (PC & Mac) and outputs them in HDMI format. Great for connecting the VGA video output of your computer or media server and integrating it into a new digital HDMI Home Theater System.

The supported VGA input / HDMI output resolutions are:

640x480 @ 60hz
720x400 @ 60hz
800x600 @ 60hz
1024x768 @ 60hz
1280x720(Equal to 720p) @ 60hz
1280x768 @ 60hz
1280x1024 @ 60hz
1360x768 @ 60hz
1600x1200 @ 60hz
1920x1080(Equal to 1080i/p) @ 60hz

These converters are commonly used to combine video output from your PC Screen and audio from a analog sound card one HDMI signal to be distributed to other areas in your house. Perfect for watching DVD's, Blu-rays or listening to MP3's in all areas of your home or business.

Example diagram below. VGA + Stereo RCA converter can function as standalone between PC / Laptop and display and HDMI splitter and extender shown on diagram shown not needed.

Combine VGA and Analog Sound from PC to HDMI signal for distribution

A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. This item conforms to the HDMI v1.3 specifications described in the section. In general for Blu-ray HDMI v1.0 is required as a minimum and for PS3 / Xbox 360 HDMI v1.2 is recommended as a minimum. HDMI v1.3 exceeds both HDMI v1.0 and v1.2 specifications.

This product is not supplied with any HDMI, Coaxial or Toslink cables. Cables need to be purchased separately. Product supplied without packaging / boxing directly from factory to ensure lowest price possible to the public. You will not find another similar device with the same quality for a lower price.

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Related Keywords : vga to hdmi converter, rca analog to hdmi converter, PC to HDMI converter, stereo rca to HDMI converter, convert PC graphics card to HDMI, RGB to HDMI, HD15 to HDMI
Price: R639.00 Manufacturer: HDCabling
Model Number: VGA_to_HDMI_Converter Added to Inventory on: Monday 27 June, 2011

WHDI - Wireless HDMI Extender up to 20m using 5G wireless technology
Overview

The Video Transceiver System includes both a wireless transmitter and receiver. These sets can transmit a P/60Hz Deep Color A/V HDMI signal up to 20m.The transmitter connects to the HDMI output of a variety of high definition devices including Satellite or HD Settop boxes, Blue-Ray or DVD Players, uncompressed 1080 cable, game Consoles and PC media centers. The receiver must be connected to the HDMI input of any LCD, LED, DLP or plasma display or projector.

Main features

- Operating frequency range : 5.25GHz~ 5.825 GHz
- DFS function;
- Compact portable size;
- Build in Omni-directional antennas;
- 20m (LOS) with no latency, walls and obstacles will decrease maximum tranmsmission distance. Tested up to 15m with walls and obstacles inbetween 720p/1080i;
-IR Remote control repeating cable included to enable switches channels on source from remote location where receiver unit is installed.

WHDI_Wireless_HDMI_Specifications
WHDI_Wireless_HDMI_Connection_Diagram

Price: R3,799.00 Manufacturer: HDCabling
Model Number: WHDI_Wireless_HDMI Added to Inventory on: Monday 05 September, 2011

1.5 Meter Figure 8 Power Cable (220v Chargers, HDTV Power Cable etc)

Figure 8 shape power cords are commonly used on laptops, printers and a variety of other appliances. Like the following items we supply:

4 Port Power Adapter / 10W USB Charger - White (220~240V SA 2-pin plug)

Price: R25.00 Manufacturer: HDCabling
Model Number: Figure_8_Power_Cable Added to Inventory on: Monday 21 January, 2013

110 Block Termination Tool
The 110 Block Termination Tool terminates 22 to 26 AWG wires on 110 blocks. The tool is spring-loaded and fully adjustable.

The Tool terminates and trims wires with one punch. You can use the tool to add, change or remove wire connections.

Price: R69.00 Manufacturer: HDCabling
Model Number: Termination_Tool Added to Inventory on: Sunday 05 August, 2012

12mm Spiral Cable for Cable Management / Price per Meter (Available in lengths up to 5 meter)
Spiral cable is used to twist around any type of cables to allow for a neater installation / cable management.

When installed spiral cable can be stretched to allow almost 2x it's native length and diameter e.g 12mm cable can be wrapped around 24mm combined cables and 1 meter spiral cable can be installed up to 2 meter when stretched around cables.

Price: R9.50 Manufacturer: HDCabling
Model Number: 12mm_Spiral_Cable_management Added to Inventory on: Sunday 03 October, 2010

4mm Bula Banana plug
These 4mm test plugs have a screw-in termination, a rigid insulating sleeve and soft ends for self-assembly of the test lead.
 

  • Simple assembly
  • Body: Brass
  • Spring: Steel
  • Contact plating: Nickel
  • Insulation: PVC
  • Maximum cable diameter: 3.5mm
  • Contact: Screw termination
  • Length: 61.5mm
  • Available in black
Price: R25.00 Manufacturer: HDCabling
Model Number: 4mm_Bula_Banana_Plug Added to Inventory on: Saturday 19 January, 2013

4mm Standard Banana Plug, Solderless and Stackable
Features
•Designed to fit on the end of any 22 AWG to 18 AWG wire.
•Cross hole wire entry fits wires up to .12” (3mm) diameter.
•Available with tarnish resistant nickel plating for very low contact resistance.
•Model 4899 is rated to temperatures up to +302°F (+150°C).
•Set screw simplifies assembly of test leads and jumpers by using a flat blade screwdriver.
•Fits standard panel and binding post banana jacks .161” to .166” (4,0mm to 4,2mm) diameter.

Price: R9.00 Manufacturer: HDCabling
Model Number: 4mm_Banana_Plug_Easy Added to Inventory on: Saturday 19 January, 2013

Coaxial Cable Stripper / Wire Stripper for RG58, RG59, RG62, RG6, RG6QS, RG3C, RG4C & RG5C Cables
Specifications

● Cable stripper used for stripping RG58, RG59, RG62, RG6, RG6QS, RG3C, RG4C & RG5C cables
● Fixed 2-blade construction

Description

● The V-block can be reversed, and the indication arrow ">" indicates the (RG) cable size.
● Stripper distance can be changed if user moves one of the stripping blades.
● Stripping the coaxial jacket and inner conductor in one operation is done by rotating the stripper clock-wise 3-6 times.
● It is easy and effective.
● For stripping different cable materials use the built-in hex key to align the correct socket and adjust the blade for best results.
Related Keywords : Universal cable stripper, stripper for all RG cables, Cable wire stripper, Strip any coaxial Wire, Strip wires coaxial, coaxial wire stripper
Price: R55.00 Manufacturer:
Model Number: Coaxial_Wire_Cable_Stripper Added to Inventory on: Wednesday 19 August, 2009

Fixed 30" - 63" 75Kgs LCD LED Plasma TV Wall Mount Bracket

Description

This low profile wall bracket keeps TV 0.78 inch (20mm) close to the wall. This wall mount supports most 30 to 63 inch flat TVs (LED or LCD) up to 75kgs weight. It is good for boardrooms, digital signage, or home theaters. Hardware is included for wood studs or concrete wall mounting.

Features

  1. Ultra - Slim Design, slimmest mounting solution
  2. High - tech look, smooth mount plate, streamlined designed
  3. Heavy - duty steel construction in classic black finish, Load capacity up to 75kgs
  4. Large rectangular shaped access holes for ease cable tidying and wiring access
  5. Safety screws ensure secure TV position to wall Bracket that avoids movement

Specifications

TV Mount Type

Fixed TV Wall Mount

Supportable Display Size

30 - 63"

Load capacity

75kgs

Material

Heavy - duty Steel

TV to Wall

0.79"

Supports VESA standards up to

620*400

Gross weight

2.5kg

Package Dimensions

67.8 x 8 x 3.5cm / 26.69 x 3.15 x 1.38in (L x W x H)

Package includes

  • 1 x TV wall mount in retail box
  • 1 x A complete set of screws and other fittings required for assembly
  • 1 x Assembly Manual
  • 1 x Free bubble level

NOTE: Supported screen size is provided as a reference only. Please check bracket dimensions above, and make sure overall bracket size does not exceed TV. Fixed Wall Bracket.

Price: R259.00 Manufacturer: HDCabling
Model Number: Streamline_LCD_Wallmount_Brack Added to Inventory on: Thursday 11 April, 2013

HD Blu-ray Media - Traxdata 25GB Re-writable BD-RE 2x discs - 10 Pack Spindle
Re-writable BD-RE discs can be erased and re-recorded multiple times. Record data / backup movies multiple times onto the same disc by erasing the disc when not used anymore.

Traxdata Blu-ray Disc series are the revolutionized blank media using blue-violet laser to record either high-definition (HD) video or multiple Gigabytes data archiving. Using Traxdata’s exclusive FMS (Flexible Manufacturing System) and sophisticated production know-how can bring next generation products at the shortest time frame with reasonable pricing. People will enjoy High-Definition TV programs with Traxdata Blu-ray Disc series.

Specifications:
Format BD-R  BD-RE
Capacity 25 GB 25 GB
Recording Speed 1-4X,1-6X 1-2X
Recording layer Inorganic material Phase-change material
Recording Wavelength 405 nm 405 nm
Diameter 120 mm 120 mm
Thickness 1.2 mm 1.2 mm
Cover layer 0.1mm 0.1mm
Price: R699.00  R499.00 Manufacturer: HDCabling
Model Number: 2X_BD-RE Added to Inventory on: Wednesday 13 October, 2010

Krone Impact Punch Down Tool with Close Lock
Used to install wires easily into a telephone socket (wall plugs) or Cat5e faceplate or Patch Panels. Includes tool ends for cutting, striping and inserting.

Features

• Simple to use.
• Integrated spring loaded bladed cuts of excess automatically.
• Includes a small hook to remove any existing wires from a socket.
• Small blade to cut and strip wires to a desired length.
• Main tool for pushing wires fully into tight spaces.
• Small and compact, easily stored and transported.
• Excellent quality.
Price: R59.00 Manufacturer: HDCabling
Model Number: Krone_tool_with_Close_Lock Added to Inventory on: Thursday 17 June, 2010

Laser Distance Measure Meter with Area & Volume Memory Functions
Use this laser meter to easily provide quotes to customers for cable installations over long distances. Easily measure Area or Volume in a building or house in a couple of minutes.

Features:

- LCD with Backlight
- Power supply: 1 x 9v Alkaline Battery (not included)
- Measure Distance From 50cm to 20 Meter / 400 Sqaure meters
- Area, volume, addition, subtraction calculations
- Frequency: 40kHz (ultrasonic pickup)
- Resolution 0.01m accuracy
- Dimensions: 150 x 70 x 30mm
- Weight (without battery): 130g

Price: R389.00 Manufacturer: HDCabling
Model Number: Laser_Distance_Measure Added to Inventory on: Thursday 29 March, 2012

Network cable tester for UTP / STP Cable (RJ45) and telephone cable (RJ11)
This device allows you to test network cable and telephone cable, wire by wire for all wire cores.

The relative indicators on the main tester and the remote testing terminal will flash one by one in cycle to judge which wire is in the correct working connection, or in the incorrect order connection. This test tool will also indicate short circuits or open circuits. This tester is suitable for testing UTP / STP Networking cable (RJ45 connectors, including grounded connectors) and telephone cable using RJ11 connectors.

Price: R119.00 Manufacturer: HDCabling
Model Number: UTP_STP_RJ45_RJ11_Tester Added to Inventory on: Sunday 05 August, 2012

RJ45 / RJ11 / RJ12 Crimping Tool (For UTP and STP ethernet cables)
A crimping tool is used to terminate / crimp RJ45 connectors onto ethernet cables / UTP / STP and are normally used in network connections and needs to be installed with our HDMI extenders range below. The tool can also terminate RJ11 connectors which is commonly used in telephony products.

HDMI Extender CAT5e/CAT6 w/Tx + Rx (30m 1080p / 50m 720p)

HDMI Extender CAT6/CAT7 w/Tx + Rx (50m 1080p / 100m 720p)

Specifications

- Comfort grip handles
- Built-in cable stripper
- Built-in cable cutter
- Built-in lock latch

CAT6e Unshielded Twisted Pair (UTP) 550Mhz ISA/IEC 11801 Cable

Unshielded RJ45 connectors at CAT6 Boots + Connectors (Set of 1 x Boot and 1 x RJ45 Connector).

CAT5e Shielded Twisted Pair (STP) 350Mhz ISA/IEC 11801 Cable

Shielded RJ45 connectors at Shielded CAT5e / CAT6 Boots + Connectors.

Related Keywords : network crimper, ethernet crimper, network crimping tool, rj11 crimping tool, rj45 crimping tool, ethernet cables crimping tools, crimp ethernet cables, crimp network cables, how to make a ethernet cable, how to make a network cable, network wiring tool, lan networking tool.
Price: R79.00 Manufacturer: HDCabling
Model Number: RJ45_Crimping_Tool_Easy_Stripp Added to Inventory on: Thursday 27 August, 2009

Universal Cable Jacket Stripper (RG-59/6/11/7 cable, UTP/STP and Telephone Cable)
● Light weight, compact, cost-effective stripper, simple to operate.
● Adjustable stripping blade for different insulation thickness, prevents damage of shielding and conductors.
● The cassette can be reversed to change different coaxial cable.
● Easily to adjust with thumb screw.
● With cable cutter.

Used to:

Strip outer jacket of UTP and STP cable and CAT 5e round cable.
Strip RG-59/6/11/7 cable
Strip Flat telephone cable

Price: R75.00 Manufacturer: HDCabling
Model Number: Universal_Cable_Jacket_Strippe Added to Inventory on: Monday 28 September, 2009

Wire Stripper - Easy Stripper for UTP / STP / RG cables
Wire Stripper for stripping of UTP / STP Cables and RG59 / RG6U.

Specifications

- Top end for 110 / 88 type insertion.
- Stripping of wire diameter 5.0mm to 6.2mm.
- Made of Poly-Resin.

Price: R19.00 Manufacturer: HDCabling
Model Number: Easy_Stripper_Type_A Added to Inventory on: Thursday 17 June, 2010

1000 mAh AAA Rechargeable batteries - Pack of 4
AAA size rechargeable batteries are commonly used in electronic products IR remotes and gaming accessories / remotes. Batteries rated at 1000 mAh to ensure enough power is provided for use with digital cameras as well. Batteries are rated to be charged ± 1000 times before replacements are needed.

All batteries must be charged before usage, please see recommended charging times below. Do not attempt to overcharge batteries since it will not improve it's lifetime and may damage the batteries.

Recommended Charging Times

AA Sizes

2800 mAh - 14 hours
2500 mAh - 12 hours
800 mAh - 8 hours

AAA Sizes

1000 mAh - 5 hours
400 mAh - 2 hours

9v Batteries

400 mAh - 12 hours
280 mAh - 10 hours
200 mAh - 7 hours

Price: R75.00 Manufacturer: HDCabling
Model Number: AAA_1000mAh_4_Pack Added to Inventory on: Sunday 15 August, 2010

1000 mAh AAA Rechargeable batteries with charger (AAA, AA or 9v charger) - Includes 4 x AAA Batteries
AAA size rechargeable batteries are commonly used in electronic products IR remotes and gaming accessories / remotes. Batteries rated at 1000 mAh to ensure enough power is provided for use with digital cameras as well. Batteries are rated to be charged ± 1000 times before replacements are needed.

All batteries must be charged before usage, please see recommended charging times below. Do not attempt to overcharge batteries since it will not improve it's lifetime and may damage the batteries.

Charger can accommodate charging of AAA, AA and 9v Nickel-metal hydride (NiMH) or Nickel-cadmium (Ni-Cd) rechargable batteries.

Do not attempt to recharge ANY TYPE of Alkaline batteries with the charger.

Recommended Charging Times

AA Sizes

2800 mAh - 14 hours
2500 mAh - 12 hours
800 mAh - 8 hours

AAA Sizes

1000 mAh - 5 hours
400 mAh - 2 hours

9v Batteries

400 mAh - 12 hours
280 mAh - 10 hours
200 mAh - 7 hours

Price: R125.00 Manufacturer: HDCabling
Model Number: AAA_1000mAh_with_Charger Added to Inventory on: Friday 13 August, 2010

2.4Ghz Wireless AV Sender with IR Extender (Wireless Composite / Stereo Audio) - JH-1000
This wireless AV set includes a transmitter and receiver. You can connect any Yellow RCA (Composite video) and Red/White RCA (Stereo Audio) source / player / gaming console to the sender and it will transmit it via wireless 2.4Ghz to the receiver connected to any display with a Yellow RCA / Composite input. It also functions as a IR Remote Extender to transmit a IR signal from one room to another room when using any type of IR remote e.g for changing DSTV channels, controlling DVD Player etc. from another room.

Specifications

●Transmit stereo audio (Red/White RCA) and video (Yellow RCA / Composite video) signal.
●Frequency range: 2.400GHz - 2.483GHz
●Preset any of 4 channels to avoid interference
●433MHz IR extender to remote control AV products.
●Transmitting distance without obstacles: 100 meters. Walls and obstacles will reduce distance.
●Lower power consumption.
●No need for any additional software or remote control programming.
●The transmitter can connect with Camcorder, Vidicon, VCD/DVD, Satellite receiver, STB, Speaker, Sound-card of computer, Microphone, etc and any other AV Devices with Composite Video and Stereo RCA audio and transmit AV signal to receiver.
●The receiver can connect with TV set, LCD display, Portable DVD, Computer, Speaker, etc and any other device with analog audio and composite / yellow RCA video inputs.
● Devices use PLL technology to make sure the transmitting and receiving are more reliable and stable.

Wireless AV Transmission diagram IR Extender

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Related Keywords : wireless av, send AV signal wirelessly, remote control extender, remote blaster, send IT remote control signal, wireless video, wireless audio, wireless composite video sender and receiver
Price: R569.00 Manufacturer:
Model Number: Wireless_2.4Ghz_AV_Set Added to Inventory on: Tuesday 04 May, 2010

2800 mAh AA Rechargeable batteries - Pack of 4
AA size rechargeable batteries are commonly used in electronic products IR remotes and gaming accessories / remotes. Batteries rated at 2800 mAh to ensure enough power is provided for use with digital cameras as well. Batteries are rated to be charged ± 1000 times before replacements are needed.

All batteries must be charged before usage, please see recommended charging times below. Do not attempt to overcharge batteries since it will not improve it's lifetime and may damage the batteries.

Recommended Charging Times

AA Sizes

2800 mAh - 14 hours
2500 mAh - 12 hours
800 mAh - 8 hours

AAA Sizes

1000 mAh - 5 hours
400 mAh - 2 hours

9v Batteries

400 mAh - 12 hours
280 mAh - 10 hours
200 mAh - 7 hours

Price: R95.00 Manufacturer: HDCabling
Model Number: AA_2800mAh_with_Charger Added to Inventory on: Friday 13 August, 2010

2800 mAh AA Rechargeable batteries with charger (AAA, AA or 9v charger) - Includes 4 x AA Batteries
AA size rechargeable batteries are commonly used in electronic products IR remotes and gaming accessories / remotes. Batteries rated at 2800 mAh to ensure enough power is provided for use with digital cameras as well. Batteries are rated to be charged ± 1000 times before replacements are needed.

All batteries must be charged before usage, please see recommended charging times below. Do not attempt to overcharge batteries since it will not improve it's lifetime and may damage the batteries.

Charger can accommodate charging of AAA, AA and 9v Nickel-metal hydride (NiMH) or Nickel-cadmium (Ni-Cd) rechargable batteries.

Do not attempt to recharge ANY TYPE of Alkaline batteries with the charger.

Recommended Charging Times

AA Sizes

2800 mAh - 14 hours
2500 mAh - 12 hours
800 mAh - 8 hours

AAA Sizes

1000 mAh - 5 hours
400 mAh - 2 hours

9v Batteries

400 mAh - 12 hours
280 mAh - 10 hours
200 mAh - 7 hours

Price: R139.00 Manufacturer: HDCabling
Model Number: AA_2800mAh_with_Charger Added to Inventory on: Friday 13 August, 2010

5.8 Ghz Wireless AV Sender with IR Extender (Wireless Composite / Stereo Audio)
5.8 Ghz wireless sets can transmit further distances than 2.4 Ghz sets and are designed for open plan usage. The units can still be used with walls / obstacles between transmitter and receiver but obstacbles will reduce distance of signal. Movement can also affect wireless radio frequency signals.

The 5.8 Ghz wireless AV set includes a transmitter and receiver. You can connect any Yellow RCA (Composite video) and Red/White RCA (Stereo Audio) source / player / gaming console to the sender and it will transmit it via wireless 5.8 Ghz to the receiver connected to any display with a Yellow RCA / Composite input. It also functions as a IR Remote Extender to transmit a IR signal from one room to another room when using any type of IR remote e.g for changing DSTV channels, controlling DVD Player etc. from another room.

The IR emitter / receiver functionality has been tested with standard single view DSTV Remotes, various blu-ray remotes and DVD player remotes and working 100%. Due to different frequencies / encryption on HDPVR remotes the HDPVR remote does not function via the IR Emitter / Receiver on this set. For transmitting remote control IR signals to a remote source / player and tested with HDPVR use the IR Wireless Remote Control Extender - Use any IR remote to control equipment up to 30m away

Specifications

● Transmit stereo audio (Red/White RCA) and video (Yellow RCA / Composite video) signal.
● Frequency range: 5.8 Ghz
● Preset any of 4 channels to avoid interference
● 433MHz IR extender to remote control AV products.
● Transmitting distance without obstacles: 100 meters. Walls, movemant, obstacles and other radio interference will reduce distance.
● Low power consumption.
● No need for any additional software or remote control programming.
● The transmitter can connect with Camcorder, Vidicon, VCD/DVD, Satellite receiver, STB, Speaker, Sound-card of computer, Microphone, etc and any other AV Devices with Composite Video and Stereo RCA audio and transmit AV signal to receiver.
● The receiver can connect with TV set, LCD display, Portable DVD, Computer, Speaker, etc and any other device with analog audio and composite / yellow RCA video inputs.
● Devices use PLL technology to make sure the transmitting and receiving are more reliable and stable.

Wireless AV Transmission diagram IR Extender

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

Related Keywords : wireless av, send AV signal wirelessly, remote control extender, remote blaster, send IT remote control signal, wireless video, wireless audio, wireless composite video sender and receiver
Price: R899.00 Manufacturer: HDCabling
Model Number: Wireless_5.8Ghz_AV_Set Added to Inventory on: Tuesday 10 August, 2010

9 volt, 230 mAh NiMH Rechargeable Battery
9v batteries are commonly used in electronic products and installation equipment / voltage testers / cable testers etc. Batteries rated at 230 mAh to ensure enough power is provided for electronic devices. Batteries are rated to be charged ± 1000 times before replacements are needed.

All batteries must be charged before usage, please see recommended charging times below. Do not attempt to overcharge batteries since it will not improve it's lifetime and may damage the batteries.

Charger at 9v, AA or AAA battery charger with Pack of 4 AA batteries can accommodate charging of AAA, AA and 9v Nickel-metal hydride (NiMH) or Nickel-cadmium (Ni-Cd) rechargable batteries. Do not attempt to recharge ANY TYPE of Alkaline batteries with the charger.

Recommended Charging Times

AA Sizes

2800 mAh - 14 hours
2500 mAh - 12 hours
800 mAh - 8 hours

AAA Sizes

1000 mAh - 5 hours
400 mAh - 2 hours

9v Batteries

230 mAh - 10 hours
200 mAh - 7 hours

Price: R65.00 Manufacturer: HDCabling
Model Number: 9v_230mAh_Rechargeable_battery Added to Inventory on: Tuesday 19 October, 2010

AA to C Type Battery Adapter - Transparent / clip-in
C type batteries are normally used in toys. This adapter takes a standard AA type battery and converts it to be installed in equipment requiring a C type.
Price: R12.00 Manufacturer: HDCabling
Model Number: A_to_C_Type_Adapter Added to Inventory on: Friday 13 August, 2010

AA to D Type Battery Adapter - Transparent / clip-in
D type batteries are normally used in toys. This adapter takes a standard AA type battery and converts it to be installed in equipment requiring a D type.
Price: R14.00 Manufacturer: HDCabling
Model Number: A_to_D_Type_Adapter Added to Inventory on: Friday 13 August, 2010

Additional Transmitter battery for IR / RF Remote Extender
This battery allows an additional remote to be used with the wireless IR receiver at IR Wireless remote extender.

Installing the RF transmitter in any Remote

1.) Remove only ONE of your existing batteries in remote.
2.) Replace it with the transmitter battery based on AA / AAA type remote control use the options below.

Battery Replacement options for AA and AA remotes
Price: R179.00 Manufacturer: HDCabling
Model Number: RF_Battery Added to Inventory on: Tuesday 19 October, 2010

HD PVR / SD PVR / Single view Decoders Replacement Remote
HD PVR / SD PVR and Single View remote for Multichoice decoders. Compatible with the following models:

  • DSD 1110
  • DSD 1131
  • DSD 1132
  • HD PVR 4 Tuner
  • HD PVR 2P
  • SD PVR (TV 1 Only)

The following functions needs to be accessed via the menu interface and not directly supported on the remote: TV, ALT, TV GUIDE & Language

Price: R49.00 Manufacturer: HDCabling
Model Number: Replacement_Decoder_Remote Added to Inventory on: Thursday 31 January, 2013

HD PVR / Single view Decoders Universal Remote

HD PVR / SD PVR and Single View remote for Multichoice decoders. Compatible with the following models:

  • DSD 1110
  • DSD 1131
  • DSD 1132
  • HD PVR 4 Tuner
  • HD PVR 2P
  • SD PVR (TV 1 Only)

** 2 Batteries included with the universal remote. Remote uses 2 x AA Batteries.

Price: R149.00 Manufacturer: HDCabling
Model Number: HDPVR_Remote_Universal Added to Inventory on: Thursday 19 May, 2011

IR Links - IR 3 "eye" Emitter and receiver cable - 3.5mm Male Jack Plug
Three emitter "eyes" ensure easier placement of emitter "eyes" to transmit to source device IR control port. You can also control multiple sources by placing the individual emitter eyes in front of different sources. Cable length from 3.5mm jack ± 1.5 meter.

IR Links extend any IR remote control signal to another room. These links are used with various equipment capable of plugging in an external IR emitter and receiver with a 3.5mm input / output.

IR Links are commonly used with the HDMI 60m Extender with IR Capabilities. It can also be used with the IR to RF Wireless Extender at IR Wireless Remote Control Extender.

IR Receiver (larger IR "eye") - Plugs into HDMI Extender Receiver. You will focus your IR Remote towards this receiver to operate equipment at the HDMI Transmitter side.

IR Emitter (small IR "eyes") - Plugs directly into HDMI Extender Transmitter. If one source needs to be controlled focus it in front of source IR port. If multiple sources needs to be controlled install it in a way that the emitter has direct line of sight to all source IR ports.

Price: R129.00 Manufacturer: HDCabling
Model Number: 3_eye_IR_Emitter_Receive Added to Inventory on: Wednesday 27 October, 2010

IR Links - IR Single "eye" Emitter and Receiver - 3.5mm Male Jack Plug
IR Links extend any IR remote control signal to another room. These links are used with various equipment / TV Links capable of plugging in an external IR emitter and receiver with a 3.5mm input / output.

IR Links are commonly used with the HDMI 60m Extender with IR Capabilities.

IR Receiver (larger IR "eye") - Plugs into HDMI Extender Receiver. You will focus your IR Remote towards this receiver to operate equipment at the HDMI Transmitter side.

IR Emitter (small IR "eye") - Plugs directly into HDMI Extender Transmitter. If one source needs to be controlled focus it in front of source IR port. If multiple sources needs to be controlled install it in a way that the emitter has direct line of sight to all source IR ports.

Price: R49.00 Manufacturer: HDCabling
Model Number: IR_Emitter_Receiver Added to Inventory on: Saturday 14 August, 2010

IR Links - IR Two "eye" Emitter and Receiver - 3.5mm Male Jack Plug
Two emitter "eyes" ensure easier placement of emitter "eyes" to transmit to source device IR control port. You can also control multiple sources by placing the individual emitter eyes in front of different sources. Cable length from 3.5mm jack ± 1.5 meter.

IR Links extend any IR remote control signal to another room. These links are used with various equipment capable of plugging in an external IR emitter and receiver with a 3.5mm input / output.

IR Links are commonly used with the HDMI 60m Extender with IR Capabilities. It can also be used with the IR to RF Wireless Extender at IR Wireless Remote Control Extender.

IR Receiver (larger IR "eye") - Plugs into HDMI Extender Receiver. You will focus your IR Remote towards this receiver to operate equipment at the HDMI Transmitter side.

IR Emitter (small IR "eyes") - Plugs directly into HDMI Extender Transmitter. If one source needs to be controlled focus it in front of source IR port. If multiple sources needs to be controlled install it in a way that the emitter has direct line of sight to all source IR ports.

Price: R69.00 Manufacturer: HDCabling
Model Number: 2_eye_IR_Emitter_Receive Added to Inventory on: Wednesday 13 October, 2010

IR Wireless Remote Control Extender - Use any IR remote to control equipment up to 30m away
Control your electronic components using your current IR remotes with AAA or AA batteries and use it through cabinet doors, walls & floors from anywhere in your home or from outside. No need to focus remote to an IR receiver. Supplied transmitter battery will transmit up to 30 meter away to wireless receiver and transmit IR signals to your centralised equipment.

Wireless RF Transmitter battery

Works with all remotes using AA or AAA batteries e.g satellite decoders, Blu-ray Players, DVD Players, Digital receivers, Aircon etc.

Benefits of RF transmitter battery opposed to traditional IR Wireless transmitter / receivers

● Only 1 x Receiver unit needed.
● Any remote control can be used to control equipment by replacing one battery with the transmitter battery included. Convert all your remotes to be used anywhere in the house up to 30m away from receiver unit.
● Product works on a different frequency and no interference from current 433Mhz equipment will be experienced.

Remote Control Extender Example

Additional RF Transmitter batteries available at Transmitter battery for IR / RF Remote Extender which can be used with additional remotes, no additional receiver unit needed.

The units is supplied with a single "eye IR emitter to control any IR source. If multiple sources need to be controlled e.g 2 or 3 players or devices choose any of the IR links at Two "eye" IR Emitter or Three "eye" IR Emitter.

Installing the RF transmitter in any Remote

1.) Remove only ONE of your existing batteries in remote.
2.) Replace it with the transmitter battery based on AA / AAA type remote control use the options below.

Battery Replacement options for AA and AA remotes

Legend of accessories included

Included in package

● 1 x Transmitter battery (Additional batteries available to convert more remotes)
● 2 x AAA Re-chargeable batteries
● AA battery Sleeve
● Receiver unit
● 1 "eye" emitter cable
● AC/DC Adapter
● Instruction Manual

Price: R519.00 Manufacturer: HDCabling
Model Number: RF_Remote_Extender Added to Inventory on: Tuesday 12 October, 2010

Multichoice HDPVR / SDPVR / Dualview Learning Remote

HDPVR remote for Multichoice HDPVR decoders. Remote is Programmable / can be set to IR Learning.

Compatible Decoders:

M-Net Decoders Older DSTV Decoders Newer DSTV Decoder
Comcrypt 630 DSD 1131
Delta Plus 635 DSD 1132
Delta 9000 642 SD PVR
  645 HD PVR 4T
  660 HD PVR 2P
  720 HD PVR 2U
  720i  
  910  
  933  
  977  
  9876  
  9876B  
  Dualview  

 

 

 

 

 

 

 

 

 

 

 

 






Remote uses 2 x AA Batteries which is included.

Price: R229.00 Manufacturer: HDCabling
Model Number: Multichoice_HDPVR_Remote Added to Inventory on: Sunday 03 October, 2010

TV Link for HDPVR / SDPVR - IR Extender over RF Cable (Multichoice model)
TV Links are installed with any SDPVR or HDPVR using your existing RF / Coaxial cable to control the PVR from another room via IR Remote.

TV Links are powered from the decoder and does not require external power.

Price: R155.00 Manufacturer: HDCabling
Model Number: MC_TVLink Added to Inventory on: Monday 04 October, 2010

TV-Link for HDPVR / SDPVR - IR Extender over RF Cable (Digital Link System)
TV Links are installed with any SDPVR or HDPVR using your existing RF / Coaxial cable to control the PVR or decoder supporting TV Links from another room via the DSTV IR Remote.

TV Links are powered from the decoder and does not require external power.

Price: R99.00 Manufacturer: HDCabling
Model Number: HDCabling_TVLink Added to Inventory on: Sunday 05 August, 2012

TVLink (Ellies model) for HDPVR / SDPVR - Remote link eye over RF Cable
TV Links are installed with any SDPVR or HDPVR using your existing RF / Coaxial cable to control the PVR from another room via IR Remote.

TV Links are powered from the decoder and does not require external power.

Price: R99.00 Manufacturer: HDCabling
Model Number: Ellies_TVLink Added to Inventory on: Wednesday 25 May, 2011

12V SLX External Power supply
When splitting signals via any SLX splitter the power provided by the RF Out on a DSTV decoder or any other RF out on a device is enough to power the SLX. When cascading more than one SLX e.g 1x4 SLX cascaded onto a 1x2 or another 1x4 SLX an external power supply uch as this one is needed to ensure enough power supplied to both splitters

SLX Splitters are listed at SLX Splitters.
Price: R79.00 Manufacturer: HDCabling
Model Number: SLX_Power_Supply Added to Inventory on: Sunday 08 July, 2012

2 Way Powered / Active Compact Aerial Splitter with RF Amplifier (SLx) with F-Type Connectors
SLx Aerial / RF Splitters are used to distribute a single RF / Aerial signal to multiple displays with RF inputs. Based on your current requirements you may require a 2-port, 4-port or larger splitter. Cable lengths using High Quality RG6U 64 Braid cable can be up to 30m from the SLx Splitter outputs. On longer cable lengths an optional external power adapter can be connected to the SLx to provide additional power for longer cable runs.

Specifications

● Lightweight Compact Design.
● Powered from either RF2 Satellite receiver output or external power supply.
● High Quality 64 Braid RG6U Cable ranges up to ±30 meter from SLx outputs.
● 12V DC Power supply optional with 3.5mm jack connection.
● Model : SLx2CF
● Forward Frequency : 88 - 862 Mhz
● Gain : 8dB
● Reverse Frequency : 5 - 30 Mhz
● Gain : 8dB
● Voltage on Outputs : 9V DC @ 15mA
● Line Power Supply : 9V DC from RF2 out connector of sattellite receiver
● External Power supply : 12v DC

Band
  • I (VHF) II (FM) III (VHF) IV (UHF) V (UHF)
  • UHF Channel No
    • 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68
  • Frequency Range (MHz)
    • 47-68, 87.5-108, 174-230, 470-622, 622-862
  • Vision Carrier (MHz)
    • 471.25, 479.25, 487.25, 495.25, 503.25, 511.25, 519.25, 527.25, 535.25, 543.25, 551.25, 559.25, 567.25, 575.25, 583.25, 591.25, 599.25, 607.25, 615.25, 623.25, 631.25, 639.25, 647.25, 655.25, 663.25, 671.25, 679.25, 687.25, 695.25, 703.25, 711.25, 719.25, 727.25, 735.25, 743.25, 751.25, 759.25, 767.25, 775.25, 783.25, 791.25, 799.25, 807.25, 815.25, 823.25, 831.25, 839.25, 847.25
  • Sound Carrier (MHz)
    • 477.25, 485.25, 493.25, 501.25, 509.25, 517.25, 525.25, 533.25, 541.25, 549.25 557.25, 565.25, 573.25, 581.25, 589.25, 597.25, 605.25, 613.25, 621.25, 629.25, 637.25, 645.25, 653.25, 661.25, 669.25, 677.25, 685.25, 693.25, 701.25, 709.25, 717.25, 725.25, 733.25, 741.25, 749.25, 757.25, 765.25, 773.25, 781.25, 789.25, 797.25, 805.25, 813.25, 821.25, 829.25, 837.25, 845.25, 853.25
    • SLX Compact Active Aerial RF Amplifier Setup Diagram
  • Price: R125.00 Manufacturer: HDCabling
    Model Number: 2_Way_SLX Added to Inventory on: Friday 17 September, 2010

    2x4 (2 inputs, 4 outputs) LNB Voltage Selected Multiswitch – For HD PVR’s / Single View / Dualview Decoders
    Multiswitches are used to distribute the horizontal and vertical frequencies from LNB mounted on satellite dish to multiple outputs. Using a multiswitch you can connect more devices to one dish / LNB. Sample installation diagram below.

    Specifications

    ● Model : MS224 Multiview Switch
    ● Frequency : 950 - 2150 Mhz

    2x4 Multiswitch Installation Diagram
    Price: R199.00 Manufacturer: HDCabling
    Model Number: 2x4_Multiswitch_with_Passthrou Added to Inventory on: Friday 17 September, 2010

    2x6 (2 inputs, 6 outputs) LNB Voltage selected Multiswitch – For HD PVR’s / Single View / Dualview Decoders
    Multiswitches are used to distribute the horizontal and vertical frequencies from LNB mounted on satellite dish to multiple outputs. Using a multiswitch you can connect more devices to one dish / LNB. Sample installation diagram below.

    Specifications

    ● Model : MS-2601 Xtraview Switch
    ● Frequency : 950 - 2150 Mhz
    ● Insertion Loss : 5dB
    ● Power Passing : 500mA Max

    2x6 Multiswitch Installation Diagram
    Price: R239.00 Manufacturer: HDCabling
    Model Number: 2x6_Multiswitch Added to Inventory on: Friday 17 September, 2010

    4 Way Powered / Active Compact Aerial Splitter with RF Amplifier (SLx) with F-Type Connectors
    SLx Aerial / RF Splitters are used to distribute a single RF / Aerial signal to multiple displays with RF inputs. Based on your current requirements you may require a 2-port, 4-port or larger splitter. Cable lengths using High Quality RG6U 64 Braid cable can be up to 30m from the SLx Splitter outputs. On longer cable lengths an optional external power adapter can be connected to the SLx to provide additional power for longer cable runs.

    Specifications

    ● Lightweight Compact Design.
    ● Powered from either RF2 Satellite receiver output or external power supply.
    ● High Quality 64 Braid RG6U Cable ranges up to ±30 meter from SLx outputs.
    ● 12V DC Power supply optional with 3.5mm jack connection.
    ● Model : SLx4CF
    ● Forward Frequency : 88 - 862 Mhz
    ● Gain : 8dB
    ● Reverse Frequency : 5 - 30 Mhz
    ● Gain : 8dB
    ● Voltage on Outputs : 9V DC @ 15mA
    ● Line Power Supply : 9V DC from RF2 out connector of sattellite receiver
    ● External Power supply : 12v DC

    Band
    • I (VHF) II (FM) III (VHF) IV (UHF) V (UHF)
  • UHF Channel No
    • 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68
  • Frequency Range (MHz)
    • 47-68, 87.5-108, 174-230, 470-622, 622-862
  • Vision Carrier (MHz)
    • 471.25, 479.25, 487.25, 495.25, 503.25, 511.25, 519.25, 527.25, 535.25, 543.25, 551.25, 559.25, 567.25, 575.25, 583.25, 591.25, 599.25, 607.25, 615.25, 623.25, 631.25, 639.25, 647.25, 655.25, 663.25, 671.25, 679.25, 687.25, 695.25, 703.25, 711.25, 719.25, 727.25, 735.25, 743.25, 751.25, 759.25, 767.25, 775.25, 783.25, 791.25, 799.25, 807.25, 815.25, 823.25, 831.25, 839.25, 847.25
  • Sound Carrier (MHz)
    • 477.25, 485.25, 493.25, 501.25, 509.25, 517.25, 525.25, 533.25, 541.25, 549.25 557.25, 565.25, 573.25, 581.25, 589.25, 597.25, 605.25, 613.25, 621.25, 629.25, 637.25, 645.25, 653.25, 661.25, 669.25, 677.25, 685.25, 693.25, 701.25, 709.25, 717.25, 725.25, 733.25, 741.25, 749.25, 757.25, 765.25, 773.25, 781.25, 789.25, 797.25, 805.25, 813.25, 821.25, 829.25, 837.25, 845.25, 853.25
    • SLX Compact Active Aerial RF Amplifier Setup Diagram
  • Price: R175.00 Manufacturer: HDCabling
    Model Number: 4_Way_SLX Added to Inventory on: Friday 17 September, 2010

    7 Inch Display DSTV / Multichoice Walka Mobile Decoder
    The Walka 7 is portable TV with a 7” viewing screen providing digital visual and audio quality. The device can be customized through 4 Aspect ratio settings and; audio is delivered via 2, 1.5 watt speakers.

    Features:

    - Access Dstv Mobile.
    - Access Mobile TV Guide.
    - 7 Inch screen.
    - 2, 1.5 Watt speakers for better audio quality.
    - Rechargeable Battery with up to six hours of viewing.
    - 4 Aspect ratio settings.
    - Has a signal strength and battery indicator in the user interface.

    Subscripton Pricing: e.mobile - Free. DStv Mobile Monthly: R49 DStv Mobile for Premium - No payment. DStv Mobile is offered at no extra subscription cost.
    Price: R879.00 Manufacturer: HDCabling
    Model Number: 7_Inch_Multi_Walka Added to Inventory on: Thursday 11 October, 2012

    DSTV / Multichoice Walka Mobile Decoder
    The DSTV Walka Mobile Decoder features a built-in display to view your favourite DSTV channels while on the move.

    - Box includes : Lanyard, Stand, Earphones, USB Charger, USB cable and quick guide
    - Coverage: DVB-H Broadcast is limited to 9 major cities of S.A and distribution of this product should be limited to areas within coverage.
    - 15 Channels (As of April 2012, more channels may be added later by Multichoice)
    - TV Licence Required
    - 3.5” screen
    - Box size 14x11x6 cm
    - Signal DVB-H broadcast
    Price: R639.00 Manufacturer: HDCabling
    Model Number: DSTV_Walka_Decoder Added to Inventory on: Monday 16 April, 2012

    Inline Surge Protector / Suppressor / Coaxial Cable Spike Protection / TV Signal Surge Protector for LNB or Multiswitch
    This Surge Ender is ideal for protection from lightening for CATV converters, decoders, TVs, VCRs, Satellite receivers, or any other electronics use at home or office. Plugs directly into coax line. Protects CATV converters, decoders, SATV receivers, VCRs, TVs etc. from lightening strikes.

    Inline Surge Protector Suppressor Spike Coaxial Cable Satellite TV Adapter LNB

     

    ·         F Male to F Female

    ·         Insertion loss: MAX-4.5dB

    ·         Return loss: 16dB typical

    ·         Normal resistance across coax: 10,000 mega ohms (104 MO)

    ·         Attack time: 100 nano seconds (10 -7SEC)

    ·         Max surge current: 5000A per 8/20 uS

    Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

    Price: R49.00 Manufacturer: HDCabling
    Model Number: Inline_LNB_Surge_Protector Added to Inventory on: Saturday 24 November, 2012

    Ku Band / Single Linear LNB / LNBF For Top TV / DSTV Single View Decoders (1 Legacy Port)
    LNB's are mounted on Satellite dishes and connected to set-top boxes e.g Multichoice DSTV Decoders or TopTV Decoders. Depending on your current satellite receivers you may either need a 1 Port, 2 Port, 4 Port, 8 Port or SATCR / Unicable LNB.

    Specifications

    ● Conversion Gain : 70dB
    ● Input Frequency : 10.70 - 12.75 Ghz
    ● Output Frequency : 950 - 2150 Mhz
    ● Noise Figure : 0.3dB
    ● Includes Slidable Rain Cover for RG6U F-Type connectors.

    Price: R89.00 Manufacturer: HDCabling
    Model Number: Single_LNBF Added to Inventory on: Sunday 05 June, 2011

    Ku Band Twin / Dual LNB For HD PVR's / Single View / Dualview Decoders (2 Legacy Ports)
    LNB's are mounted on Satellite dishes and connected to set-top boxes e.g Multichoice DSTV Decoders or TopTV Decoders. Depending on your current satellite receivers you may either need a 1 Port, 2 Port, 4 Port, 8 Port or SATCR / Unicable LNB. Example diagram below for this product.

    Specifications

    ● Manufacturer : Humax
    ● Model : Humax HD
    ● Conversion Gain : 70dB
    ● Input Frequency : 10.70 - 12.75 Ghz
    ● Output Frequency : 950 - 2150 Mhz
    ● Noise Figure : 0.3dB
    ● Includes Slidable Rain Cover for RG6U connectors.

    Twin / Dual LNB Installation Diagram
    Price: R209.00 Manufacturer: HDCabling
    Model Number: Dual_LNB_Legacy Added to Inventory on: Friday 17 September, 2010

    Ku Band Universal Octo LNB For DSTV HD PVR's / Single view / Dualview Decoders (8 Legacy Ports)
    Product Description

    1. Eight Port Ouput for Universal Frequency.
    2. High efficient and low phase noise.
    3. Full Support HD.

    Details:
    Universal Octo LNB

    RF Input:
    L: 10.7 ~ 11.70 GHz
    H: 11.7 ~ 12.75 GHz

    IF Output:
    L: 950 ~ 1950 MHz
    H: 1100 ~ 2150 MHz

    LO:
    L: 9.75 GHz
    H: 10.6 GHz

    Price: R499.00 Manufacturer: HDCabling
    Model Number: 8_port_Octo_LNB Added to Inventory on: Wednesday 23 January, 2013

    Ku Band Universal Quad LNB For DSTV HD PVR's / Single View / Dualview Decoders (4 Legacy Ports)
    LNB's are mounted on Satellite dishes and connected to set-top boxes e.g Multichoice DSTV Decoders or TopTV Decoders. Depending on your current satellite receivers you may either need a 1 Port, 2 Port, 4 Port, 8 Port or SATCR / Unicable LNB. Example diagram below for this product.

    Specifications

    ● Model : TS-4604
    ● Conversion Gain : 70dB
    ● Input Frequency : 10.70 - 11.70 Ghz / 11.70 - 12.75 Ghz
    ● Output Frequency : 950 - 1950 Mhz / 1100 - 2150 Mhz
    ● L.O Frequency : 9.75 / 10.6 Ghz
    ● Noise Figure : 0.3dB

    Quad LNB Installation Diagram
    Price: R399.00 Manufacturer: HDCabling
    Model Number: Quad_LNB_Legacy Added to Inventory on: Friday 17 September, 2010

    Mobile / Portable Camping Satellite Dish Kit ideal for travelling
    The base Portable / Camping Mobile Dish Kit package includes components below as indicated on picture on the right. Additional optional extra’s are shown below in the diagram and selectable below from drop-down menu’s to order. Dish Kit is supplied in a black 40x40x20cm case for easy transport and packing. Most Extra’s except for LCD display will also fit into the carry case supplied with the dish kit. Note that when optional extra’s ordered below order may not be shipped next business day and stock needs to be verified on extra optional components. Please send us an email for stock validation on optional extra’s.

    Base system / pricing includes

    • Portable Satellite Dish
    • Single LNB – Can be used on any Multichoice single view decoder (DSD or older models), HDPVR’s will only view on single LNB, not record and Twin LNB needs to be used if recording function needed.
    • SATFinder / Beeper to calibrate and align dish to receive DSTV Signal)
    • 4 x F-Type Connectors. 2 x used for connection from dish LNB to Multichoice decoder. 2 x used for short Coaxial / RG6U cable from LNB to SATFinder / Beeper while busy with installation.
    • 15m Coaxial / RG6U Cable to ensure freedom of moving dish around for installation when camping or any outdoor location. A short length needs to be used for SATFinder / Beeper.
    • Mounting bracket for dish (suction bracket). Can be mounted to any flat smooth surface, caravan window, fastened on a table etc. (Horizontal,Vertical or skew mounts possible, surface must be flat / smooth)

    Optional Extra's & Information

    The optional extra’s below will allow you to connect components in diagram below to either 220v Power outlet or by choosing the Inverter as optional extra all components can be connected to either Car or caravan lighter adapter (Inverter will convert 12v to 220v and has a standard SA 3-way plug 220v output). The inverter 220v power output has been tested with Multichoice HDPVR 2p, Satellite dish kit / base system, 18.5” LCD display with built-in speakers and RCA to VGA Converter below as a complete solution and enough power is supplied. The HDPVR or decoder can also be replaced by a DVD Player, Blu-ray player etc., but adding more than one player to inverter supplied power may cause inverter to supply too little power to all components and only one player / source is recommended at a time to be powered-on when using 12v to 220v inverter. Mobile,Portable Camping Satellite Dish Kit Installation Example

    Price: R789.00 Manufacturer: HDCabling
    Model Number: Mobile_Dish_Kit Added to Inventory on: Sunday 26 June, 2011

    SATCR / Unicable LNB with One Additional Legacy Port For DSTV HD PVR's / Single View / Dualview Decoders (4 + 1 Legacy port)
    SATCR LNB's transmit all horizontal and vertical frequencies via a single cable. These LNB's are also referred to as Unicable LNB's. This eliminates the 4 x RG6U cable clutter when installing a sattellite receiver e.g HDPVR which requires either a Quad LNB / 4 cables, Dual LNB / 2 cables and Multiswitch with 4 additional cables or a single SATCR and single RG6U Cable from LNB to HDPVR.

    This LNB features 1 additional legacy port as well to connect 1 x additional single view decoder onto the same LNB together with HDPVR (4-port) connection onto SATCR port.

    LNB's are mounted on Satellite dishes and connected to set-top boxes e.g Multichoice DSTV Decoders or TopTV Decoders. Depending on your current satellite receivers you may either need a 1 Port, 2 Port, 4 Port, 8 Port or SATCR / Unicable LNB. Example diagram below for this product.

    Specifications

    ● Manufacturer : Microelectronics Technology Inc.
    ● Model : AK541-XT2-L / SCR Quad with Legacy LNB
    ● Input Frequency : 10.70 - 12.75 Ghz
    ● L.O : 9.75 / 10.6 Ghz
    ● Includes rain cover for protection of RG6U F-Type connectors.
    SATCR Unicable LNB Installation Example Diagram
    Price: R699.00  R599.00 Manufacturer: HDCabling
    Model Number: SATCR_1_Legacy_LNB Added to Inventory on: Sunday 19 September, 2010

    SATCR / Unicable LNB with Two Additional Legacy Ports For DSTV HD PVR's / Single View / Dualview Decoders (4 + 2 Legacy port)
    SATCR LNB's transmit all horizontal and vertical frequencies via a single cable. These LNB's are also referred to as Unicable LNB's. This eliminates the 4 x RG6U cable clutter when installing a sattellite receiver e.g HDPVR which requires either a Quad LNB / 4 cables, Dual LNB / 2 cables and Multiswitch with 4 additional cables or a single SATCR and single RG6U Cable from LNB to HDPVR.

    This LNB features 2 additional legacy ports as well to connect 2 x additional single view decoders or HDPVR 2p onto the same LNB together with HDPVR connection onto SATCR port.


    A member of the innovative and award winning Unicable (single cable solution) LNB series this product will enable the connection of up to 6 single tuner decoders / STB's using 2 cables only or alternatively up to 4 decoders / STB's using only one cable (providing STBs are Unicable enabled). It is supplied with 1 splitter unit included for a flexible distribution of the signal at home. It is ready for High Definition transmissions and provides excellent Noise Figure performance. Manufactured to the highest industry quality standards and designed to meet strict specifications, this LNB is an ideal solution for any satellite broadcast reception.

    LNB's are mounted on Satellite dishes and connected to set-top boxes e.g Multichoice DSTV Decoders or TopTV Decoders. Depending on your current satellite receivers you may either need a 1 Port, 2 Port, 4 Port, 8 Port or SATCR / Unicable LNB. Example diagram below for this product.

    draw

    Low Band Input Frequency Range

    10.7~11.7 GHz

    LO Frequency

    9.75 GHz

    High Band Input Frequency Range

    11.7~12.75 GHz

    LO Frequency 10.6 C+Hz
    LO Initial Accuracy +/- 1.0 MHz
    LO Temperature Drift +/- 2.5 MHz
    LO Phase Noise @ 10K Hz -90 dBc/Hz max.
    SCR Conversion Gain 57 dB min.
    Legacy Conversion Gain 55 dB Min.
    Gain Variation +/- 0.75 dB/ 27 MHz
    Image Rejection 40 dB min.
    1 dB Compression Point (O/P) 0.0 dBm min.
    Cross-pole Isolation 20 dB Min.
    O/P VSWR 2.5 : 1
    Output Impedance 75Ω (F-type)
    IF Channel bandwidth 60 MHz
    Output IF Channel 1 (SCR0) 1210 MHz
    Output IF Channel 2 (SCR1) 1420 MHz
    Output IF Channel 3 (SCR2) 1680 MHz
    Output IF Channel 4 (SCR3) 2040 MHz
    Channel isolation 20 dB Min.
    Legacy ports 2
    SCR's Control Signals DiSEqC command extension based on EN-50494
    Legacy Switch Voltage Control <14.2 (V) ,  >15 (H) Volts
    Legacy 22k sensitivity 220 mV [min.]
    DC Power 250mA@13.5V
    Working Temperature - 30°C~ + 60°C
     Weight   350g
    Price: R919.00 Manufacturer: HDCabling
    Model Number: Unicable_LNB_2_legacy Added to Inventory on: Monday 08 November, 2010

    Satellite Dish SATFinder - Mobile or fixed dish alignment tool
    Signal strength meter for quick and easy dish adjustment - For analogue and digital signals / installation of satellite dishes - Analogue panel meter.

    ■ Signal strength meter for quick and easy-dish adjustment
    ■ For analogue and digital signals
    ■ Analogue panel meter
    ■ Illuminated display
    ■ Operating voltage: 13-18V
    ■ Frequency range: 950-2150 MHz
    ■ Audiable signal strength reading
    Price: R269.00  R199.00 Manufacturer: HDCabling
    Model Number: Satfinder Added to Inventory on: Sunday 05 June, 2011

    SLX 2-in 2-out Active TV link Splitter with active Heartbeat

    Product Specifications

    • All-in-one heart beat and SLX splitter.
    • Connect two decoders in an extra view setup while supplying extra points in the house with TVLINK functionality.
    • Designed for current Multichoice DSTV extra view systems.
    • The Perfect RF OUT to RF OUT Solution.

    • Band
      • I (VHF) II (FM) III (VHF) IV (UHF) V (UHF)
    • UHF Channel No
      • 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68
    • Frequency Range (MHz)
      • 47-68, 87.5-108, 174-230, 470-622, 622-862
    • Vision Carrier (MHz)
      • 471.25, 479.25, 487.25, 495.25, 503.25, 511.25, 519.25, 527.25, 535.25, 543.25, 551.25, 559.25, 567.25, 575.25, 583.25, 591.25, 599.25, 607.25, 615.25, 623.25, 631.25, 639.25, 647.25, 655.25, 663.25, 671.25, 679.25, 687.25, 695.25, 703.25, 711.25, 719.25, 727.25, 735.25, 743.25, 751.25, 759.25, 767.25, 775.25, 783.25, 791.25, 799.25, 807.25, 815.25, 823.25, 831.25, 839.25, 847.25
    • Sound Carrier (MHz)
      • 477.25, 485.25, 493.25, 501.25, 509.25, 517.25, 525.25, 533.25, 541.25, 549.25 557.25, 565.25, 573.25, 581.25, 589.25, 597.25, 605.25, 613.25, 621.25, 629.25, 637.25, 645.25, 653.25, 661.25, 669.25, 677.25, 685.25, 693.25, 701.25, 709.25, 717.25, 725.25, 733.25, 741.25, 749.25, 757.25, 765.25, 773.25, 781.25, 789.25, 797.25, 805.25, 813.25, 821.25, 829.25, 837.25, 845.25, 853.25
    Price: R199.00 Manufacturer: HDCabling
    Model Number: 2x2_triax_SLX Added to Inventory on: Wednesday 23 January, 2013

    SLX 2-in 4-out Active TV link Splitter with active Heartbeat
    Product Specifications

    • All-in-one heart beat and SLX splitter.
    • Connect two decoders in an extra view setup while supplying extra points in the house with TVLINK functionality.
    • Designed for current Multichoice DSTV extra view systems.
    • The Perfect RF OUT to RF OUT Solution.

    • Band
      • I (VHF) II (FM) III (VHF) IV (UHF) V (UHF)
    • UHF Channel No
      • 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68
    • Frequency Range (MHz)
      • 47-68, 87.5-108, 174-230, 470-622, 622-862
    • Vision Carrier (MHz)
      • 471.25, 479.25, 487.25, 495.25, 503.25, 511.25, 519.25, 527.25, 535.25, 543.25, 551.25, 559.25, 567.25, 575.25, 583.25, 591.25, 599.25, 607.25, 615.25, 623.25, 631.25, 639.25, 647.25, 655.25, 663.25, 671.25, 679.25, 687.25, 695.25, 703.25, 711.25, 719.25, 727.25, 735.25, 743.25, 751.25, 759.25, 767.25, 775.25, 783.25, 791.25, 799.25, 807.25, 815.25, 823.25, 831.25, 839.25, 847.25
    • Sound Carrier (MHz)
      • 477.25, 485.25, 493.25, 501.25, 509.25, 517.25, 525.25, 533.25, 541.25, 549.25 557.25, 565.25, 573.25, 581.25, 589.25, 597.25, 605.25, 613.25, 621.25, 629.25, 637.25, 645.25, 653.25, 661.25, 669.25, 677.25, 685.25, 693.25, 701.25, 709.25, 717.25, 725.25, 733.25, 741.25, 749.25, 757.25, 765.25, 773.25, 781.25, 789.25, 797.25, 805.25, 813.25, 821.25, 829.25, 837.25, 845.25, 853.25
    Price: R289.00 Manufacturer: HDCabling
    Model Number: 2x4_SLX Added to Inventory on: Sunday 05 August, 2012

    1 Meter 7" Samsung Galaxy Tab AV Cable - Connect Galaxy tablet to TV - only P1000 compatible
    This cable is used to connect Samsung Galaxy Tablet 7" to any display / TV with a Composite video (Yellow RCA) input and stereo audio RCA input (Red/White). This will enable any movies watched on the Galaxy Tab to be displayed on a larger screen.

    This cable will only output audio on the 10.1 Samsung Galaxy Tablet and video does not output via cable on 10.1" tablet. Only compatible with the P1000 model tablet.
    Price: R79.00 Manufacturer: HDCabling
    Model Number: AV_Galaxy_Tab Added to Inventory on: Friday 05 August, 2011

    1 Meter Ipad Female to Male extension cable for any Apple data / sync / video or audio accessories - 30pin Apple Connector
    This extension cable is mostly used to extend your current Ipad cable and can be used for other Apple data products as well to extend the data / sync cable from the equipment connected to the Ipad. It can also be used with Ipad / Ipod audio & video accessories such as the docking station at Ipad 1,2 & 3 / Ipod HDMI Docking Station with Component and VGA video and other car audio / video accessories with uses the 30pin apple connector.

    • High quality original 30pin male to female 30pin cable for iPad / iPad 2 / iPhone / iPod
    • No external power supply required

    Compatible with:

    • iPhone 4S, 4G, 3G(S), 2G
    • iPad, iPad 2, The New iPad
    • iPod Nano series
    • iPod Classic series
    • iPod Touch series

    Price: R89.00 Manufacturer: HDCabling
    Model Number: Ipad_Male_to_Female_Cable Added to Inventory on: Sunday 08 July, 2012

    1 Meter micro-USB to USB Data Cable (For charging or exchanging data) - Nokia, Blackberry, Samsung, HTC cellphones etc.

    micro-USB connectors are used on HTC (Wildfire, One X etc), Samsung (S2,S3 etc), Blackberry All Models i.e.Torch / Curve and various Nokia cellphones and other smartphones.

    Use this cable to exchange data between cellphone and PC, Sync calendar, email and other items or to charge the cellphone or device from any PC USB port, Car charger USB or 220v power adapter with USB port.

    The cable has a Male USB 2.0 Type A connector on the one side and a USB 2.0 male Micro-USB connector Type B on the other side.

    Compatible with:

    ·BlackBerry:

    ·LG:

    ·Motorola:

    ·Nokia:

    ·Samsung:

    ·HTC:

    o   Pearl Flip 8220,

    o   Glance VX7100,

    o   MOTO Z6c,

    o   6205,

    o   Exec i225,

    o   Nexus One,

    o   Pearl Flip 8230,

    o   enV2 VX9100,

    o   MOTO Z9,

    o   Intrigue 7205,

    o   M240,

    o   HD2 (T-Mobile),

    o   Storm 9530,

    o   enV3 VX9200,

    o   ZineZN5,

    o   N97,

    o   Rant M540,

    o   Droid Incredible,

    o   Storm 2 9550,

    o   Chocolate 3 VX8560,

    o   E8,

    o   1606,

    o   MessagerTouch,

    o   EVO 4G, Desire,

    o   Curve 8900,

    o   Chocolate Touch VX8575,

    o   Q9h,

    o   3606,

    o   MessagerII R560,

    o   T-Mobile myTouch 3G Slide,

    o   Pearl 9100,

    o   Flare,

    o   RAZR2 V8,

    o   Mural 6750,

    o   Caliber R850,

    o    Wildfire,

    o   Curve 8520,

    o   Lotus Elite / Mystique,

    o   RAZR2 V9,

    o   Twist 7705,

    o   M220,

    o   Aria,

    o   Curve 8530,

    o   AX155,

    o   RAZR2 V9m,

    o   Sable 3711,

    o   M330,

    o   T-Mobile G2,

    o   Curve 3G 9300,

    o   enV2,

    o   RAZR2 V9x,

    o   Shade 2705,

    o   Reclaim M560,

    o   Merge,

    o   Curve 3G 9330,

    o   Versa VX9600,

    o   Adventure V750,

    o   6350,

    o   M320,

    o   T-Mobile myTouch 4G,

    o   Tour 9630,

    o   Dare VX9700,

    o    i410,

    o   Slide 6600,

    o   Rant M540,

    o   Surround,

    o   Bold 9700,

    o   enVTouch VX11000,

    o   RAZR VE20,

    o   E72,

    o   HighnoteM630,

    o   HD7,

    o   Bold 9650,

    o   LX290,

    o   Hint QA30,

    o   E73 Mode,

    o    Freeform R350,

    o   EVO Shift 4G,

    o   Torch 9800,

    o   Lotus LX600,

    o   Karma QA1,

    o   Mirage 2605

    o   TwoStepR470,

    o   Thunderbolt,

    o   Style 9670,

    o   AX585,

    o   Stature i9,

     

    o   Exclaim M550,

    o   Inspire 4G,

    o   Bold 9780

    o   Banter AX265,

    o    i290,

     

    o   Code i220,

    o   Freestyle,

     

    o   AX300,

    o   Clutch i465,

     

    o   MyShotII R460,

    o    Incredible 2,

     

    o   AX830,

    o   Rival A455,

     

    o   Omnia2 i8000,

    o   7 Trophy,

     

    o   AX155,

    o   Entice W766,

     

    o   Omnia2 i920,

    o   EVO 3D,

     

    o   AX310 / UX310,

    o   MOTO i776w,

     

    o   Instinct HD S50,

    o   HD7S,

     

    o   UX585,

    o   Crush W835,

     

    o   Behold 2 T939,

    o   myTouch4G Slide,

     

    o   Bliss UX700,

    o   Quantico W845,

     

    o   Mythic A897,

    o   Status,

     

    o   TritanUX840,

    o   Barrage V860,

     

    o   Flight A797,

    o   Rhyme,

     

    o   UX220,

    o   Droid,

     

    o   Stunt R100,

    o   Vigor,

     

    o   LX400,

    o   CLIQ,

     

    o   Strive A687,

    o   Titan,

     

    o   UX300,

    o   CLIQ XT,

     

    o   Reality U820,

    o   Amaze,

     

    o   UX830,

    o   DEVOUR,

     

    o   Seek,

    o   EVO Design / Hero S,

     

    o   VX8610 Decoy,

    o   BACKFLIP,

     

    o   Stride R330,

    o   Vivid,

     

    o   VX8360,

    o   Brute i680,

     

    o   Restore,

    o   Radar,

     

    o   Lotus LX600,

    o   VE440,

     

    o   Rugby 2,

    o   Rezound

     

    o   Secret CF750,

    o   Renegade V950,

     

    o   Gravity T,

     

     

    o   CF360, LX370,

    o   Rapture VU30,

     

    o   Gravity 3,

     

     

    o   Rumor 2 LX265,

    o   i890,

     

    o   Vibrant,

     

     

    o   Lyric MT375,

    o   Debut i856,

     

    o   Captivate,

     

     

    o   Shine II,

    o   i296,

     

    o    Intercept,

     

     

    o   Ally,

    o   i1,

     

    o   Epic 4G,

     

     

    o   Arena GT950,

    o   Droid X,

     

    o   Haven U320,

     

     

    o   VX5500,

    o   Droid 2,

     

    o   Fascinate,

     

     

    o   VX5600,

    o   Droid Pro,

     

    o   Mesmerize,

     

     

    o   Rumor Touch,

    o   CHARM,

     

    o   Acclaim,

     

     

    o   eXpoGW820,

    o   GRASP,

     

    o   Gusto,

     

     

    o   Cosmos VN250,

    o   DEFY,

     

    o   Intensity II,

     

     

    o   Fathom VS750,

    o   FLIPOUT,

     

    o   Eternity II,

     

     

    o   RemarqLN240 / Imprint MN240,

    o   FLIPSIDE,

     

    o   Flight II,

     

     

    o   Vu Plus GR700,

    o   Citrus,

     

    o   T369,

     

     

    o   Prime,

    o   Bravo,

     

    o   Craft,

     

     

    o   Sentio,

    o   ES400,

     

    o   A197,

     

     

    o   GU 295,

    o   CLIQ 2,

     

    o   T249,

     

     

    o   dLite,

    o   ATRIX 4G,

     

    o   A187,

     

     

    o   GS170,

    o   DROID BIONIC,

     

    o   Transform,

     

     

    o   Clout,

    o   DROID X2,

     

    o   Freeform II,

     

     

    o   Encore,

    o   XPRT,

     

    o   Focus,

     

     

    o   Neon II,

    o   Clutch+ i475,

     

    o   Evergreen,

     

     

    o   OptimusS,

    o   i412,

     

    o   M360,

     

     

    o   OptimusT,

    o   Theory,

     

    o   Continuum,

     

     

    o   OptimusM,

    o   Droid 3,

     

    o   Solstice II,

     

     

    o   Octane,

    o   TRIUMPH,

     

    o   Nexus S,

     

     

    o   Quantum,

    o   TITANIUM,

     

    o   T259,

     

     

    o   Vortex,

    o   Photon / ELECTRIFY,

     

    o   Contour,

     

     

    o   Cosmos Touch,

    o   ATRIX 2,

     

    o   Galaxy S 4G,

     

     

    o   Apex,

    o   Admiral,

     

    o   Gem,

     

     

    o   Revolution / Esteem,

    o   DROID RAZR,

     

    o   Galaxy Indulge,

     

     

    o   Saber,

    o   XOOM 2,

     

    o   Droid Charge,

     

     

    o   G2x (T-Mobile),

    o   DROID 4,

     

    o   T-Mobile Sidekick 4G,

     

     

    o   Thrive,

    o   DROID RAZR MAXX

     

    o    Infuse 4G,

     

     

    o   Thrill,

     

     

    o   Replenish,

     

     

    o   Genesis,

     

     

    o   Trender,

     

     

    o   Cosmos 2,

     

     

    o   Dart,

     

     

    o   Envoy,

     

     

    o   Gravity SMART,

     

     

    o   Enlighten,

     

     

    o    Exhibit,

     

     

    o   Marquee,

     

     

    o   Conquer,

     

     

    o   800G,

     

     

    o   Chrono,

     

     

    o   C100,

     

     

    o   Freeform III,

     

     

    o   OptimusSlider,

     

     

    o   Convoy 2,

     

     

    o   DoublePlay,

     

     

    o   Factor,

     

     

    o   Nitro HD,

     

     

    o   Admire,

     

     

    o   Spectrum

     

     

    o   Epic Touch,

     

     

     

     

     

    o   Gravity TXT,

     

     

     

     

     

    o   Galaxy S II ,

     

     

     

     

     

    o   Stratosphere,

     

     

     

     

     

    o   Transform Ultra,

     

     

     

     

     

    o   Transfix, Exhibit II,

     

     

     

     

     

    o   Galaxy S 2 Skyrocket,

     

     

     

     

     

    o   Focus S, Focus Flash,

     

     

     

     

     

    o    Captivate Glide,

     

     

     

     

     

    o   Illusion,

     

     

     

     

     

    o   Galaxy Note LTE,

     

     

     

     

     

    o   Attain

     

     

    Price: R32.00 Manufacturer: HDCabling
    Model Number: micro_usb_to_USB Added to Inventory on: Friday 05 August, 2011

    1 Meter Samsung Galaxy Tablet USB Data Sync Cable / Charging cable

    This cable is used to connect the Samsung devices below to any Samsung Car or 220v wall power Adapter that has a 5v USB Port on the electrical adapter for charging. It can also be connected to a PC to exchange / sync data and is an additional or replacement cable for the data cable supplied with your device.

    Samsung Compatible Table:

    • Galaxy Tab                   P1000
    • Galaxy Tab 7.0             P6200
    • Galaxy Tab 7.0 Plus     P6200
    • Galaxy Tab 7.7             P6800
    • Galaxy Tab 8.9             P7300
    • Galaxy Tab 10.1           P7510
    • Galaxy Tab 10.1V        P7100
    • Galaxy Tab 2                P3113
    • Galaxy Tab 2 7.0          P3100
    • Galaxy Tab 2 10.1        P5100
    • Galaxy Note 10.1         N8000

                                                                                                                                                                                                   

    Price: R35.00 Manufacturer: HDCabling
    Model Number: 1m_Galaxy_Tab_Cable Added to Inventory on: Friday 05 August, 2011

    1.5 Meter micro-HDMI (Type D) to Standard HDMI Cable (Type A) v1.4 - Blackberry Playbook, Acer Iconia Tablet / other micro-HDMI devices

    This cable is micro HDMI (Type D) to standard HDMI (Type A). Please enlarge the picture on the right to see the different types of HDMI ports.

    In addition to the Type A (Standard HDMI) and Type C (mini-HDMI) connector types already defined in previous versions of the HDMI standard, the HDMI 1.4 specification introduces a new "Type D" connector designed for cell phones, pocket cameras, and other portable devices where space is at a premium. Roughly the size of a Micro USB connector, it packs all the power and functionality of an HDMI link into a tiny form factor. Featuring a full nineteen-pin array like other HDMI connectors, the HDMI Micro Connector can handle video signals up to 1080p, bringing state-of-the-art HD resolutions to the realm of handheld devices. This new connector is approximately 50% smaller than the size of the existing HDMI Mini Connector.

    This cable will allow you to connect your portable device / HD Video Cameras with a micro-HDMI connector to the standard HDMI connector (type A) found on most televisions / LCD's / Plasmas and A/V recievers.

    Specifications & Features

    Connector Type: HDMI male to HDMI male
    Connector Finish: Gold
    Gauge: 19AWG
    # of conductors: 19
    Supported Resolutions: 480i to 1080p
    HDMI Certified: Yes
    HDMI Spec: 1.4
    HDCP Compliant: Yes
    CEC Compliant: Yes
    ROHS Compliant: Yes

    A technical guide on how to choose HDMI Cables & Equipment is available at Choosing the Correct HDMI Cables and HD Distribution Equipment. If you are not sure which items to purchase please send us an e-mail with requirements using the Contact form on the left under the Information section and we will select the correct products for you based on your requirements. Please check the HDMI Standards & Specifications section on our website to check what the different versions in HDMI offers regarding picture, sound quality, resolution, colour quality etc.

    HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON. The sequence below should be followed when installing new cables or equipment between source/player and LCD / Plasma.

    1.) Power-off all equipment (At the wall socket).
    2.) Connect all Cables, Splitters, Switches, Extenders within HDMI Distribution Network.
    3.) Power on all Splitters, Switches, Extenders within HDMI Distribution Network.
    4.) Power on all LCD / Plasma's and set to HDMI input from HDMI Distribution Network.
    5.) Power on Sources / Players (Sources negotiates HDCP Handshake via HDMI Network to displays which is set to HDMI input to respond to handshake).


    Compatible devices:

    LG:

    -         LG Revolution / VS910

    -         LG Thrill 4G

    ·         LG Revolution,

    ·         LG G-Slate,

    ·         LG Esteem,

    ·         LG Revolution,

    ·         LG Thrill 4G,

    Motorola:

    ·         Motorola ATRIX 2

    ·         Motorola ATRIX 4G

    -         Motorola ATRIX HD

    -         Motorola DROID 3, DROID 4

    -         Motorola DROID Bionic (XT875)

    -         Motorola DROID RAZR (XT912)

    -         Motorola DROID RAZR HD

    -         Motorola DROID RAZR MAXX

    -         Motorola DROID RAZR MAXX HD

    -         Motorola DROID X

    -         Motorola DROID X2

    -         Motorola Electrify

    -         Motorola Electrify 2

    -         Motorola Photon 4G

    -         Motorola Photon Q 4G LTE

    -         Motorola Triumph

    -         Motorola XOOM

    -         Motorola Milestone X,

    Samsung:

    -         Samsung DROID Charge (SCH-i510)

    -         Samsung Galaxy S Aviator (SCH-R930)

    -         Samsung Galaxy S Lightray 4G (SCH-R940)

    ·         Samsung ES70,

    ·         Samsung PL150,

    ·         Samsung ST5500,

    ·         Samsung ST5000,

    ·         Samsung TL500,

    ·         Samsung WD650,

    ·         Samsung WD650

    ·         Samsung Droid Charge,

    ·         Samsung Galaxy S Aviator,

    ·         Samsung Galaxy S Lightray 4G,

    Other:

    -         Sony Ericsson Xperia Arc

    -         Sony Xperia Ion

    -         Toshiba Thrive 7"

    ·         Olympus SP-800UZ,

    ·         Olympus Stylus 9010 / mju 9010,

    ·         Sprint EVO,

    ·         Fuji FinePix F80EXR,

    ·         Amazon Kindle Fire

    ·         Amazon Kindle Fire HD,

    ·         Amazon Kindle Fire HD 8.9,

    ·         BlackBerry PlayBook

    -         BlackBerry Z10

    ·         HTC EVO 4G

    -         HTC EVO View 4G (HTC Flyer)

    -         Pantech Element

    -         T-Mobile G2x / LG Optimus 2X / LG P999

    ·         Pantech Element,

    ·         T-Mobile G2x,

    ·         T-Mobile SpringBoard

    ·         ZTE Anthem 4G


    Related keywords : hdmi micro, micro-hdmi, small-hdmi, micro hdmi connector

    Price: R89.00 Manufacturer: HDCabling
    Model Number: 1.8m_micro_HDMI_Cable Added to Inventory on: Tuesday 28 June, 2011

    10-in-1 USB Cable adapter for various smartphones, cellphones & Ipad Tablets

    This cable can be used on different types of devices, helping you to carry one cable for all your devices you need to charge.

    Connectors

    Input from PC or Wall Adapter USB port : 1 x Male Standard USB Plug

    Output / Charging Connectors :

    • IPad 1 to 3 Tablets, iPod/iPhone 1 to 4 series 30pin connector
    • NK01-Nokia : Mobile phones with 2mm round-pin 2610, 2626, 2630, 2680slide, 2760, 3110, 3120, 3150, 3155, 3155i, 3250, 5220, 5300, 5310, 5320, 5500, E61, E71, E65, 6060, 6070, 6080, 6085, 6290-3G, 6300, 6500, 6500VI-3155i, N70, N71, N72, N73, N76, N77, N80, N81, N82, N85, N90, N91, N92, N93, N93i, N95, N96     
    • NK02 cable Nokia:Mobile phones with 3.5mm round-2100, 2112, 2115i, 2116, 21161, 2125, 2125i, 21261, 2128i, 2260, 2270, 2275, 2280, 2285, 2300, 2310, 2600, 2610, 2626, 2630, 2650, 2651, 3100, 3108, 3110, 3120, 3200, 6235i, 6236i, 6250, 6255i, 6256m, 6260, 6310, 6310i, 6340, 6340i, 6360, 6370, 6385, 6400, 6500, 6510, 6560, 6585, 6590, 6590i, 6600, 6610, 6610i, 6620, 6630, 6650, 6651, 6670, 6680, 6681, 6682, 6800, 6810, 6820, 6822     
    • SE01-Sony Ericsson : Mobile phones with wide connector C702, C902, C905, G502, G700, G900, K330, K530, K550, K660, K770, K800, K810, R306, S500, T303, T250, T650, T700, W350, W380, W580, W595, W610, W660, W760, W880, W890, W902, W910, W980, Z555, Z750, Z770, Z780, F305, G705, R300, T270, T280     
    • SA02-Samsung :SGH-F258, F488, G608, G808, i458, i908 Omnia, L768     
    • MT01(Min-USB)-HTC:Touch diamond, touch pro. Touch cruise, touch dual, touch vivaAsus TM . M530w, P320, P527, P526, P535, P550, P750     -Motorola mobile phone W181, W210, W213, W220, W230, W231, W270, W355, W362, W375, W396, W510, Z6, ZS, ZN200, E6, E8, EM30, K1, L7, L72, MAXX K3, MAXX V3, U6, Ug, v3     -Blackberry 8300, 8310, 8320, 8707g, 870v, 8800, 8820, pearl 8100, pearl 8120, bold 9000 glofish TM M500, M700, M800, XS00, X600, X800, Gsmart TM i-series, mw998, t600, MS-series Sony Ericsson TM     
    • MT02(Micro-USB)-Nokia 8600Luna, 8800Arte, Carbon Arte, Sapphire Arte, 8800, Sirocco, Sirocco Gold, Prism-series, 6500 classic Motorola TM voyager 855 stereo Bluetooth Headset     
    • LG01-LGTM KF700, KM380T, KM501, KM710, KS20, KT520, KU250, KU380, KU970Shine, ku990 viewty, KE850prada, KE970Shine     
    • SA01-Samsung TM SCH-S209, SCH-S299, SCH-S399, SGH-B289, SGH-S268, SGH-C408, i608, i620, i718, U608, U708, U808, D838, D848, D908, D988, E218, E258, E768, E848, E908, E958, Z368, Z728, X838     
    • PSP,Sony Kodak camera     

    Package includes:

    • 1 x USB 10 in 1 Universal Charger Cablee USB  Male sadfsadfasdf
    Price: R79.00 Manufacturer: HDCabling
    Model Number: 10_in_1_USB_Cable Added to Inventory on: Wednesday 28 November, 2012

    12 Volt Car Charger / Power Adapter with 4 USB Ports - Tablet, Mobile Phone, MP3 Player, GPS Charging
    This is a replacement 12v car adapter charger with 4 x USB ports to recharge any USB charged device. Due to some cars having only 1 lighter / 12 volt socket the 4 USB ports are ideal to enable charging of multiple devices using one adapter.

    Features

    ● Input: 12v - 24v DC, Output: DC 5V,2A shared across the 4 USB ports.
    ● 4 USB ports + 1 DC port to connect to car lighter socket
    ● Charges most brand mobile phones, GPS's, MP3 Players, Tablets etc. using the USB cable provided with the device to be charged.
    ● Over loading protection
    ● Short circuit protection
    ● High temperature protection
    Price: R79.00 Manufacturer: HDCabling
    Model Number: Car_Charger_4_Port_USB Added to Inventory on: Saturday 19 May, 2012

    2 Meter 8 pin Lightning Data / Sync & Charging Cable for Apple iPhone 5, iPad mini, Ipad 4 & iPod Touch 5

    Overview

    This USB 2.0 cable connects your iPhone, iPad, or iPod with Lightning connector to your computer's USB port for syncing and charging or to the Apple USB Power Adapter for convenient charging from a wall outlet.

    This cable is compatible with the following and newer version of the specific range:
    • iPhone 5