1.8 Meter Male DVI-D to DVI-D Male Dual Link Cable (Digital Cable only DVI-D)
Differences between DVI-D, DVI-A and DVI-I, Dual Link and Single Link DVI Video
Digital Visual Interface (DVI) is the standard interface for a high-performance connection between PCs and flat panel displays, digital CRT displays, projectors, and HDTV. The DVI-D Digital Cable delivers the high-performance, high-bandwidth interface needed for video displays of today while leaving headroom for the products of tomorrow.
These precision-engineered cables are fully compliant with the DVI standard defined by DDWG (Digital Display Working Group). The DVI-D dual link configuration provides enough bandwidth for resolutions up to 2560×1600 and allows high speed digital transmission up to 7.4 Gbps.
DVI does not carry audio and if this cable is used in conjunction with a HDMI cable audio will not be transmitted.
Specs & Features
Connector Type: DVI-D male to DVI-D male
Signal Type: Digital
Length: 1.8 Meter
Gauge: 28AWG
Pin Configuration: 24 + 1
Conductor Plating: None
Shielding level: Triple
Shielding type: EMI
1080p support: Yes
Bandwidth: Dual Link
Maximum Resolution: 2560×1600
Min Clock Freq: 21.76 Mhz
Max Clock Freq: 165 Mhz x 2
Max Thoroughput: 7.4 Gbps
Pixels per cycle 2:
Bits per Pixel 24:
DDWG Compliant: Yes
HDCP Compliant: Yes
ROHS Compliant Yes
UL Certified Yes
CL2 (In-Wall): No
VW-1: Yes
Voltage Rating: 30V
Temperature Rating: 80° C
*Due to continual efforts to make improvements to our products, all information is subject to change without notice. Items you receive may be different than described.
Pin 1 | TMDS data 2− | Digital red− (link 1) | |
---|---|---|---|
Pin 2 | TMDS data 2+ | Digital red+ (link 1) | |
Pin 3 | TMDS data 2/4 shield | ||
Pin 4 | TMDS data 4− | Digital green− (link 2) | |
Pin 5 | TMDS data 4+ | Digital green+ (link 2) | |
Pin 6 | DDC clock | ||
Pin 7 | DDC data | ||
Pin 8 | Analog vertical sync | ||
Pin 9 | TMDS data 1− | Digital green− (link 1) | |
Pin 10 | TMDS data 1+ | Digital green+ (link 1) | |
Pin 11 | TMDS data 1/3 shield | ||
Pin 12 | TMDS data 3- | Digital blue− (link 2) | |
Pin 13 | TMDS data 3+ | Digital blue+ (link 2) | |
Pin 14 | +5 V | Power for monitor when in standby | |
Pin 15 | Ground | Return for pin 14 and analog sync | |
Pin 16 | Hot plug detect | ||
Pin 17 | TMDS data 0− | Digital blue− (link 1) and digital sync | |
Pin 18 | TMDS data 0+ | Digital blue+ (link 1) and digital sync | |
Pin 19 | TMDS data 0/5 shield | ||
Pin 20 | TMDS data 5− | Digital red− (link 2) | |
Pin 21 | TMDS data 5+ | Digital red+ (link 2) | |
Pin 22 | TMDS clock shield | ||
Pin 23 | TMDS clock+ | Digital clock+ (links 1 and 2) | |
Pin 24 | TMDS clock− | Digital clock− (links 1 and 2) | |
C1 | Analog red | ||
C2 | Analog green | ||
C3 | Analog blue | ||
C4 | Analog horizontal sync | ||
C5 | Analog ground | Return for R, G, and B signals |
Reviews
There are no reviews yet.