R1,199.00

POC Powered HDMI Extender over CAT6 Networking Cable up to 60m 1080p / 90m 720p using CAT6 Networking cable(Uses no power on RX unit)
[POC_HDMI_Extender_CAT6]

POC Powered HDMI Extender over CAT6 Networking Cable up to 60m 1080p / 90m 720p using CAT6 Networking cable(Uses no power on RX unit)

The HDMI POC Powered Extender over Single Cat5e/6 extends high definition video and audio signals, at a distance of up to 60m (1080p) / 90m (720p) over a single Cat5e/6 cable. It Features EDID management, which allows and the source and display “Handshake” for seamless integration with only one cost effective Cat5e/6 cable.

Features:

  • Highest quality transmission : Using uncompressed Technology for Lossless audio transmission. Supports 1080P and 3D signals,distance up to 60m over cat6 for 1080p(We recommend using shielded cat6 or better cables), compliance with HDMI 1.3 and HDCP 1.2 standard
  • POC: Unilateral power supply. Only the transmitter connected to the power supply can make the whole set of equipment work perfectly. that's right, the receiver does not need to connect to a power source, Because it uses a special technique that allows the wires connected to transmitter and receiver to transmit power accross the CAT6 Cabling
  • EDID FUNCTION: This feature can be compatible with most display devices
  • Built-in automatic adjustment system which makes the image smooth, clearand stable;Built-in ESD protection system;Simple to install, plug and play;

Transmitter:

Receiver:

Installation Diagram:

Installation

1 Connect an HDMI cable between the HDMI input port of transmitter and the HDMI output port of the video source,
2 Connect the HDMI output port of receiver to the display device with HDMI cable,
3 Connect the transmitter UTP port to the receiver UTP port using a single CAT6 cable (Shielded CAT6 recommended as per baest practises installation guidelines).
4 Connect the provided DC 5V power supplies to the power socket of the transmitter,
5 For the first powerup it needs to confirm the working mode of EQ modes, please press the button for 30/60m on unit depending on cable distance used
6 EDID buttons : If no connection after powerup the PWR, STA indicator light, long PWR at the receiving end, no image or color etc : Long press EDID button until the STA light flashes, flashing stops after a few seconds and restart the power to ensure a correct sync is made.

Specifications:

Length of CAT-6 cable between Rx and TX…..……………….……………..Up to 60 metres
HDMI Input…..…………………...………24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format input..………DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
HDMI Output…..…………….…...………24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format output...……. …………………………LPCM7.1/DTS/Dolby-AC3/DSD
Max bandwidth………………………………………………………………………2255MHz
Max baud rate……………….…….………………….………….…………………6.75Gbps
Input Video signal ………….…………………………..…………………… 0.5~1.5Volts p-p
Output DDC signal ………………………………………………………… 5Volts p-p (TT1L)
Input/Output HDMI1.3 cable distance………….…...≤20m AWG26 HDMI 1.3 standard cable
Max working current…………………………………………………………………...1000mA
Power adapter format………...………Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/2A
Operating Temperature range……..…………….………………………………… (-15 to +55℃)
Operating Humidity range………………………….….……….5 to 90%RH (No Condensation)
Dimension (L x W x H) ……………………………….…………………………82x45x21 (mm)
Weight…..………………………………………………………..…………………………220g

Other products on the web related to this item. Please use the < > buttons below to browse through all the available listings

Reviews
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Show mobile view

0 items
Share Product