This HDMI extender matrix applies advanced HDbitT over IP technology that uses an existing home or business ethernet network to construct a MANY to MANY HDMI extender matrix function. It allows up to 99 x transmitters (Sources / Players) and unlimited receivers (HDTV’s, Projectors or PC Displays) to be connected to the matrix distribution configuration. If no Network Switch is available the Transmitter and Receiver can be connected via a single CAT6 Network Cable.

Please Note!! This is the RECEIVER UNIT ONLY and the TRANSMITTER Unit can be purchased as per links below. Multiple transmitters to multiple receivers are supported via a network switch.

Sample Installation Examples:

1/3 of the COST of traditional Matrix Switchers: Smaller size, flexible and expandable configuration options it is the best choice for growing HDMI Networks

Application Software Support : The units can be controlled and monitored via PC or Android by downloading the applicable applications. The Windows software for these units can be found at HDBiTT Matrix Extenders Windows 10 Application Software

Infrared Remote Control Support : Control and operate any source / player remotely via any Infrared Remote control in a far end room to central room where the HDBiTT Matrix Transmitter units are located. The RECEIVER unit of this Matrix Extender includes a IR Remote control to change the selected TRANSMITTER unit remotely via IR.

The Remote control below is INCLUDED with the Receiver Unit:

Specifications:

IP and MAC address setting

The Transmitter and receiver System module has a built-in HTTP server which can be accessed by any browser for firmware updates.

You will need to configure your DHCP Server / Router to assign IP addresses to the units. When most internet routers are installed they are already configured to hand out IP addresses to new devices on the network. This is automatically assigned based on your network config. Easiest to check which IP has been assigned to the HDMI over LAN TX or RX is your router log file for IP assignments or under the DHCP Server / Config area a list of hosts and IP’s assigned. IP address can then be fixed on your DHCP server by assigning the MAC address of the HDMI over LAN TX or RX to a specific IP required.

Example of Router log

“:\”192.168.1.210\”,\”host\”:\”,\”vendor\”:\”dhcp-11\”,\”moui\”:\”*\”,\”serial\”:\”*\”,\”pclass\”:\”*\”,\”cid\”:\”01:6a:76:d2:dd:62:04\”,\”ifname\”:\”br0\”}

Browser Interface on Transmitter Example:

The HDMI HDBitT TRANSMITTER unit to be used with this Receiver unit is below :

https://www.hdcabling.co.za/product/transmitter-120-meter-hdbitt-hdmi-matrix-extender-v4-0-hdmi-over-ip-network-extender-with-ir/

This product has been tested with the Wireless Long Range Beams and HDMI over Powerline Devices below for long ranges via Home or Office Powerlines or Wireless Outdoor Installations. Range on Outdoor Installation will depend on line of site and has been tested up to 1km.

Transmitter | 120 Meter HDBitT HDMI Matrix Extender v4.0 | HDMI over IP Network Extender with IR

Please Note!! The quality of your CAT6 Cable determines the distances possible since it is your transport medium. We recommended Pure Copper CAT6 as below and the alternative CCA Cable below will achieve 60-70% of  max distances possible but may vary depending on quality.

Price per Meter | CAT6 Unshielded Twisted Pair (UTP) CCA Gigabit Network Cable

Common Network Switches used with this product:

5 port Gigabit Network Switch | 10/100/1000Mbps | Tenda

16 Port Gigabit Network Switch – 10/100/1000 Mbit/s | Tenda TEG1016D

This HDMI extender matrix applies advanced HDbitT over IP technology that uses an existing home or business ethernet network to construct a MANY to MANY HDMI extender matrix function. It allows up to 99 x transmitters (Sources / Players) and unlimited receivers (HDTV’s, Projectors or PC Displays) to be connected to the matrix distribution configuration. If no Network Switch is available the Transmitter and Receiver can be connected via a single CAT6 Network Cable.

Please Note!! This is the TRANSMITTER UNIT ONLY and the RECEIVER Unit can be purchased as per links below. Multiple transmitters to multiple receivers are supported via a network switch.

Sample Installation Examples:

1/3 of the COST of traditional Matrix Switchers: Smaller size, flexible and expandable configuration options it is the best choice for growing HDMI Networks

Application Software Support : The units can be controlled and monitored via PC or Android by downloading the applicable applications. The Windows software for these units can be found at HDBiTT Matrix Extenders Windows 10 Application Software

Infrared Remote Control Support : Control and operate any source / player remotely via any Infrared Remote control in a far end room to central room where the HDBiTT Matrix Transmitter units are located. The RECEIVER unit of this Matrix Extender includes a IR Remote control to change the selected TRANSMITTER unit remotely via IR.

The Remote control below is INCLUDED with the Receiver Unit:

Specifications:

IP and MAC address setting

The Transmitter and receiver System module has a built-in HTTP server which can be accessed by any browser for firmware updates.

You will need to configure your DHCP Server / Router to assign IP addresses to the units. When most internet routers are installed they are already configured to hand out IP addresses to new devices on the network. This is automatically assigned based on your network config. Easiest to check which IP has been assigned to the HDMI over LAN TX or RX is your router log file for IP assignments or under the DHCP Server / Config area a list of hosts and IP’s assigned. IP address can then be fixed on your DHCP server by assigning the MAC address of the HDMI over LAN TX or RX to a specific IP required.

Example of Router log

“:\”192.168.1.210\”,\”host\”:\”,\”vendor\”:\”dhcp-11\”,\”moui\”:\”*\”,\”serial\”:\”*\”,\”pclass\”:\”*\”,\”cid\”:\”01:6a:76:d2:dd:62:04\”,\”ifname\”:\”br0\”}

Browser Interface on Transmitter Example:

The HDMI HDBitT Receiver unit to be used with this Transmitter unit is below:

Receiver | 120 Meter HDBitT HDMI Matrix Extender v4.0 | HDMI over IP Network Extender with IR

This product has been tested with the Wireless Long Range Beams and HDMI over Powerline Devices below for long ranges via Home or Office Powerlines or Wireless Outdoor Installations. Range on Outdoor Installation will depend on line of site and has been tested up to 1km.

Please Note!! The quality of your CAT6 Cable determines the distances possible since it is your transport medium. We recommended Pure Copper CAT6 as below and the alternative CCA Cable below will achieve 60-70% of  max distances possible but may vary depending on quality.

Price per Meter | HCCA Shielded CAT6A Cable | STP Gigabit Networking Cable

Price per Meter | CAT6 Unshielded Twisted Pair (UTP) CCA Gigabit Network Cable

Common Network Switches used with this product:

5 port Gigabit Network Switch | 10/100/1000Mbps | Tenda

16 Port Gigabit Network Switch – 10/100/1000 Mbit/s | Tenda TEG1016D

This 4×2 HDMI Matrix Switch is with 4 HDMI inputs and 2 HDMI outputs. It is a true matrix and can distribute any one of 4 sources to either of the 2 displays, and can work as a splitter to show the same source on 2 displays simultaneously. It also functions as an audio extractor to extract audio from HDMI to Optical Toslink or Stereo Analogue audio.

HDMI Matrix Switcher Installation and Wiring Setup Video

Features:

• Distributes any one of 4 sources / players / PC’s or any device with HDMI to either of 2 displays or to both displays simultaneously.
• Switch easily between multiple HDMI sources via remote control or via buttons on the unit
• Optical / Toslink audio & analogue audio – to connect to amp/sound system
• Power: 5 watts (Max)
• Power adapter: DC 5V/2A

Specifications:

• HDMI resolution – 480p, 576p, 720p, 1080i and FullHD 1080p/ 1080P@60Hz 3D, 4K Ultra HD (3840 x 2160) 30hz
• Support video format – 8/10/12 bit deep color
• Support audio format – DTS-HD/Dolby-trueHD//DTS/Dolby-AC3/DSD
• Max bandwidth – 18Gbps
• Input cable distance – 20m AWG26 HDMI standard cable, any length HDMI Fiber Cable
• Output cable distance – ≤25m AWG26 HDMI standard cable, any length HDMI Fiber Cable
• 4 x HDMI Inputs
• 2 x HDMI Output
• Max working current – 550mA
• Power adapter format – Input: AC (50HZ, 60HZ) 100V-240V; Output: DC5V/2A
• Operating Temperature range – (-15 to +55 Degrees)
• Operating Humidity range – 5 to 90%RH (No Condensation)
• Dimension (L x W x H) – 200x70x25 (mm)
• Weight – 320g

This Switch has EDID Dip Switches – Please see below for audio configuration settings and display settings

Dip Switch Settings – 0 is down and 1 is up for each of the individual 4 dip switches

0110 – 4kx2k 30hz, Dolby 2.0 via HDMI and Optical and input signal must be set to same on HDMI Source
0111 – 4kx2k 30hz, DTS 5.1 via HDMI and Optical and input signal must be set to same on HDMI Source
1000 – 4kx2k 30hz, Dolby 2.0, 7.1 Master DTS via HDMI and input signal must be set to same on HDMI Source, Optical will not support 7.1 Audio due to Toslink specification limitations.

Make the 4×4 True Matrix Switch / Splitter the heart of any truly complex and impressive home theater system. The device features 4 inputs and 4 independently assignable outputs giving you true flexibility and the ability to have various media playing on different screens. Great for choreographing an awe inspiring multi-media experience or simply allowing multiple members of the family the freedom to watch from whatever source they choose on their own screen.

Please note: The image displayed on product is the back and front how unit looks like.

Specifications :

• Support for Deep Color and HDR on 4k Ultra HD.
• Auto skip for unconnected inputs.
• Operating temp: -5 to +35 degrees C (-41 to +95 degrees F)
• Max working current: 1800mA
• Support Resolution : Ultra HD 4k / 3840 x 2160 @ 60hz, 60hz @ 1080p / 1080i / 720p / 576p / 480p / 576i / 480i
  Full-HD Chain: 4k/1080p which can be cascaded above 6 layers
• HDMI v2.0b
• Support video color format: deep color 24bit/36bit
• Support audio format: PCM, Dolby-AC3, DTS 7.1, DSD, Dolby True HD, Dolby Master Audio
• HDMI output cable distance: <=15m (can be extended with amplifier in most cases)

HDMI Matrix Switcher Installation and Wiring Setup Video

Features:

● High bandwidth pass through with support for deep color / HDR and advanced digital audio formats.
● 4 inputs and 4 independent outputs.
● IR remote control.
● AC/DC Power Adapter included.

HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON.