HDMI IR Receiver adapter with 3.5mm IR Injection Input For Long HDMI Cables (to Control Source from another room), HDMI Splitters and Matrix Switches

Description

HDMI IR Receiver adapter with 3.5mm IR Injection Input For Long HDMI Cables (to Control Source from another room), HDMI Splitters and Matrix Switches

Introduction

The HDMI IR Injection Adapter is a device that enables the user to control an HDMI source remotely,  from a location next to a TV connected the splitter. It uses the IR backward channel on the splitter to do this.
***Please note that this is only the IR adapter***
***Using two of this IR adaptors will allow you to transmit IR signals via a HDMI cable from your remote area to your source device.***
Depending on how many sources you want to control via your HDMI cable please see the IR Eyes that needs to be purchased separately: Single Set Infrared (IR) TX and RX Eyes for HDMI Splitters with IR, Matrix Switches with IR and IR Injection Kits
Connection & Set up
The diagram below shows the recommended connection method.
IR Transmitter
Connectt the IR transmitter to a 3.5mm jack socket output on the splitter/ matrix.
Position the IR transmitter module in front of the source device, with clear line of sight to the source’s IR sensor window.
IR Receiver
Position the IR receiver within clear line of sight of the position at which you will be using the source’a remote control. Uncoil the connecting cable.
The splitter/ matrix should already be connected to the TV with an HDMI cable.
IRK HDMI Adaptor
Disconnect the HDMI Cable from the TV an replace it with the IRK HDMI adaptor.
Connect the HDMI cable to the IRK HDMI adaptor.
Connect the IR receiver cable to the IRK HDMI adaptor using the 3.5mm jack socket, Labelled ‘IR RX’.
Ensure the two-way switch is set to ‘IR’.

Package Content:
1 x HDMI Adaptor – with CEC/IR slider switch