R1,349.00

Receiver ONLY - HDbitT 1080p FullHD HDMI over LAN / Network IP Switches Extender with Infrared Remote Channels Change Support
[HDBitT_HDMI_LAN_IR_RX]

Receiver ONLY -  HDbitT 1080p FullHD HDMI over LAN / Network IP Switches Extender with Infrared Remote Channels Change Support

You can connect any HDMI devices / players such as HD camera, DSTV Explora, Gaming Consoles, Blu-ray etc to a HDMI display by using Cat 5e/6 cable for long distances instead of expensive HDMI cable, you can also use your existing Infrared remote control to control the devices from a remote location. The Transmitter unit used with this Receiver unit can be purchased separately as at Transmitter Unit HDBitT HDMI over Lan - Network Switches. You can use unlimited receivers with the transmitter unit to connect a source / player to unlimited displays through network switches or routers. IR Eyes to control equipment from remote location using current equipment IR remote control is included. A Gigabit (1Gbps) Network switch needs to be used with this product since 10/100 Network Switches may have insufficient bandwidth depending on resolution used on this product higher resolutions may not work on 10/100Mbps switches.

Features

  • 120m/394ft HDMI Extender over IP with IR pass-through
  • HDMI signal extender over single CAT5/5e/6 cable
  • Extend and split by LAN (delivery by Router/switch)
  • Compatible with existing network, will not affect Internet Bandwidth or usage
  • Plug and play without any manual setting.

Connection Diagram

IP and MAC address setting

The Unit has equipped HTTP server that can be accessed via a web browser over an IP Network. You can change unit IP and MAC Address via webpage. Before building the network, the IP and MAC Address of Transmitter and Receivers must be set and all TX and RX units must have different IP addresses AND different MAC Addresses. The principle is that, all the RX and TX in the same network matrix must be in the same network segment, the IP and MAC Addresses for these RX and TX must be different. TX and RX have a default IP address. TX is 192.168.168.55, RX is 192.168.168.56 which can be customized for your network via a web browser. After the change, press the system reset button for 5 seconds {the small hole beside of HDMI port) to restore IP and MAC to default factory setting.

Application of this product

- LCD and plasma flat panel multimedia advertising project
- Big screen LED curtain wall display projects
- Large projection equipment display systems
- Industrial automation and control systems
- Audio/Video meeting systems
- Medical monitoring systems

- Security monitoring systems
- Multimedia network education systems
- Long-distance network server monitoring
- Central control system

Please ensure cables are terminated according to 568A or 568B standard as in diagram below for networking cables depending on CAT5e / CAT6 STP cable type and properly grounded via the ripcord wire inside STP cables. Grounding the cable will also ensure better protection against voltage spikes. STP cables shields better against nearby EMI.

STP or UTP 568B Termination/Crimping Standard
Most HDMI Sources / Players / Gaming Consoles use an encryption algorithm called HDCP which can cause signal issues. To troubleshoot audio / video issues (HDMI Handshake problems) regarding HDMI distribution see the problems and solutions guide at http://www.hdcabling.co.za/hdcp_hdmi_handshake_troubleshooting_guidelines.php

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD's, players and HDMI Equipment is installed.

No HDMI / CAT-5e / CAT-6 / CAT-7 cables are included with this product and must be purchased separately.

Google ADS

Reviews
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Show mobile view

0 items
Share Product