8 Port Passive DC POE / Power over Ethernet Injector Hub 12v – 57v – Gigabit Ethernet 1Gb/s

Description

8 Port Passive DC POE / Power over Ethernet Injector Hub 12v – 57v – Gigabit Ethernet 1Gb/s

This POE Injector Hub is designed to power any RouterBOARD, CCTV Camera, Wifi Access point or any other POE Device over 1Gbit/s Gigabit Ethernet. Simply connect your power source and then use an Ethernet Network cable to connect one of the injector hub ports to the POE device to power the device and exchange data over ethernet network.

Use this 8 Port Passive Gigabit PoE injector to power up to 8 Passive Gigabit PoE devices through a single power source. Ideal for powering AP’s, IP CCTV cameras or VoIP phones.

Specifications:

– Input: 12-57V DC 2.1MM/Phoenix 3.5mm DC connector
– Output: 12-57V PER PORT( 1A Max)
– Data: 1/2&3/6&4/5&7/8
– Power: 4/5 & 7/8
– Data In: Connects PC/HUB/Switch
– Ethernet Cable : TIA/EIA 568 Cat. 5
– Data rate: 10/100/1000Mbps
– Connector: RJ-45
– Operating Temperature : 0°C ~ 40°C
– Storage Temperature : -40°C~+70°C
– Operating Humidity : 10%~80%RH
– Storage Humidity :5%~90%RH
– Weight: 160g
– Dimensions: 180mm × 60mm × 25mm

Common Power Supplies below which is used with the POE Injector Hub depending on voltage required for your equipment the correct one needs to be chosen.

52 Volt, 2A Switched Mode Power Supply used with Power over Ethernet Switches & POE Injector Hubs

12 Volt 5A Switched Mode Power Supply for CCTV Cameras / DVR’s / NVR’s