Dyness Battery Monitoring Cable for Dyness DL5.0C and other RJ12 Com Port Models | USB to RJ12

Dyness Battery Monitoring Cable for Dyness DL5.0C and other RJ12 Com Port Models | USB to RJ12

Specifications:

• Constructed Cable uses FTDI FT232 Chipset for USB to RS232 depending on stock we have. If a specific chipset needed e.g. Prolific PL2303 or CH340 USB to RS232 please specify it on order or call us before ordering.
• Supports baud rates up to 1.2M bps.

This cable has a modular design and designed by us with the reasons below in mind:

• Flexibility : The Cable length, if your application changes, can be extended easily by using a RJ45 Network coupler and standard ethernet network cable. The wiring on the DB9 to RJ45 Converter can be changed if you have technical knowledge to adapt to any inverter or battery for firmware updates / monitoring. We can also adapt wiring ON REQUEST for any inverter/solar batteries if a wiring diagram is supplied.
• Maintainability : If one part of the cable fails or damaged only the specific part of the cable needs to be replaced and not the total cost of the cable.
• Reusability : The modular parts can be re-used on other applications such as USB to DB9 Serial Communication or other USB to Network Configurations if pin layout customized.

Please ensure the Battery Monitoring cable is plugged into the RJ12 (COM Port) of the Dyness battery as below:

For Solar Assistant Battery configuration for Dyness batteries please use the Battery settings below:

Under Battery à Advanced please ensure below options are selected for Dyness Batteries